Front Hub Oil Seal 1-09625568-0 1096255680 For ISUZU FRR Truck Wheel Hub Bearing

The Front Hub Oil Seal (OEM Numbers: 1-09625568-0 / 1096255680) is a premium-quality, direct replacement wheel-end sealing component designed specifically for ISUZU FRR series trucks (also compatible with CX, ES, and FR series as applicable). This precision-engineered oil seal is installed on the front wheel hub, where it seals against the axle spindle or hub. Its primary function is to retain wheel bearing lubricant within the hub assembly while preventing water, dust, and road contaminants from entering. Proper sealing is critical for maintaining correct bearing lubrication, preventing premature bearing failure, and ensuring reliable wheel-end operation under heavy loads.

• OE Quality: Manufactured to strict ISUZU dimensional and material specifications for perfect fit and function.
• Oil-Resistant Material: Premium rubber compound resists degradation from wheel bearing grease, heat, and additives.
• Durable Metal Case: Steel outer case ensures secure press-fit into the hub or axle housing.
• Garter Spring: Maintains constant sealing pressure against the spindle for reliable leak prevention.
• Precision Lip: Molded lip ensures tight sealing while minimizing friction and spindle wear.
• Prevents Grease Leaks: Eliminates front hub grease seepage, maintaining proper bearing lubrication.
• Protects Wheel Bearings: Keeps contaminants out and lubricant in, ensuring reliable bearing operation.
• Direct Replacement: Matches OE seal dimensions, lip profile, and case design.
• Essential for Wheel-End Service: Recommended replacement during hub, bearing, or brake service.
• Long Service Life: Engineered for heavy-duty commercial truck applications.
• Convenient Set: Supplied as a set of 2 pieces for both front wheels.

This front hub oil seal is specifically designed for ISUZU medium-duty trucks and commercial vehicles. Common applications include:

• ISUZU FRR (Medium-Duty Trucks)
• ISUZU CX, ES, FR series (as applicable)
• ISUZU FSR, FTR, FVR series (cross-reference applicable)
• Engine Applications: ISUZU Diesel Engines (6HK1, 6HE1, 6BD1, etc. -- verify with VIN)
• Also compatible with various ISUZU models using the same front hub seal configuration

Professional mechanic or wheel-end specialist installation recommended:

1. Ensure vehicle is safely raised - Use appropriate jack stands or a lift to support the front axle.
2. Remove the front wheel - Remove the wheel and tire assembly to access the hub.
3. Remove the brake drum or caliper - If equipped, remove the brake components to access the hub.
4. Remove the hub assembly - Remove the axle nut and pull the hub assembly off the spindle.
5. Remove the old oil seal - Carefully pry out the old seal from the hub or axle housing using a seal puller; avoid damaging the bore.
6. Clean the housing bore - Thoroughly clean the seal bore and spindle surface; remove all old seal residue and debris.
7. Inspect the spindle - Check the spindle surface for wear, scoring, or corrosion; replace if damaged.
8. Lubricate the new seal - Apply clean wheel bearing grease to the seal lip and outer case.
9. Install the new seal - Press the new seal evenly into the housing bore using a proper seal driver; ensure it is fully seated.
10. Check seal orientation - Ensure the seal lip faces the correct direction (toward the bearing/lubricant side).
11. Reinstall the hub assembly - Install the hub, bearings, and axle nut; adjust bearing preload as specified.
12. Reinstall brake components - Reinstall the brake drum or caliper and wheel.
13. Check hub grease level - Top up hub grease as required.
14. Road test - Test drive to verify no leaks and smooth wheel operation.
15. Check for leaks - Inspect the hub area for grease seepage after driving.

• Material Verification: Confirms rubber compound and metal case meet ISUZU oil resistance and durability specifications.
• Dimensional Inspection: Inner diameter, outer diameter, and thickness verified within OEM tolerances.
• Lip Profile Inspection: Seal lip geometry checked for proper sealing and spindle contact.
• Spring Tension Testing: Garter spring tension verified for consistent sealing pressure.
• Visual Inspection: 100% checked for molding defects, cracks, or surface imperfections.
• Packaged Safely: Protected and packaged to prevent damage during transit.

Neutral export packing or customized packaging available. Carton or wooden case for safe transportation. Fast delivery for stock items. Shipping by Express Air or Sea.

For pricing, availability, or bulk purchase of the Front Hub Oil Seal 1-09625568-0 1096255680 For ISUZU FRR Truck Wheel Hub Bearing Seal, please contact our sales team for a competitive quote and expert technical support.