Multi-System High-Performance 7-Array Anti-Jamming Navigator Device Up to 6

This product is a miniaturized 7-element multi-system satellite navigation anti-jamming integrated device designed for civilian drones and industrial users. It supports four satellite systems (BDS, GPS, GLONASS, and GALILEO) and features anti-broadband interference capability, with a maximum capacity to resist up to 6 simultaneous interference signals.

Internally integrated with a 7-element antenna array, anti-jamming components, and a satellite navigation receiver, the device combines miniaturization, lightweight design, and cost-effectiveness. Key technical specifications and functions include:

• RNSS Signal Reception: Supports civil codes of BDS-B1i, BDS-B1c, GPS-L1, GLO-G1, and GAL-E1, enabling stable reception of RNSS signals from the four satellite systems.
• Anti-Interference Function: Effective for BDS-B1, GPS-L1, GLO-G1, and GAL-E1 frequency bands, suppressing suppressive interferences such as narrowband, broadband, pulse, sweep frequency, and Gaussian interference.
• Performance Parameters: Horizontal positioning accuracy ≤1.5 meters (95%), speed measurement accuracy ≤0.2 m/s (95%), timing accuracy ≤100ns (95%); input voltage range 6~33V (powered via XT30 connector), power consumption ≤25W.
• Physical & Output Traits: External dimensions Φ220*29.5mm, weight ≤1200g (color: French grey); built-in full-frequency navigation and positioning module, outputting data via NMEA0183 protocol (optional serial port or RF port).
• Additional Functions: Software upgrade (via serial port for anti-jamming and receiver modules), system self-test, status patrol, anti-burnout protection (withstands continuous wave power ≥10W), and overvoltage protection.

• Multi-System Compatibility: Supports BDS, GPS, GLONASS, and GALILEO simultaneously, avoiding reliance on a single satellite system. This enhances signal reception stability and redundancy in complex electromagnetic environments.
• Superior Anti-Interference Performance: Achieves a signal-to-interference ratio of ≥110dB for single interference, ≥100dB for three interferences, and ≥90dB for six interferences—effectively suppressing multiple types of suppressive interference and ensuring uninterrupted PNT (Positioning, Navigation, Timing) services.
• Miniaturized & Lightweight Design: With dimensions of Φ220*29.5mm and weight ≤1200g, it is compact and lightweight, suitable for space-constrained applications (e.g., civilian drones, unmanned vehicles) without adding excessive load.
• Flexible Data Output: Offers two optional output methods—TTL serial port (connects to flight controller’s GNSS serial port via DuPont line) and RF port (connects to drone locator’s antenna port via SMA cable)—adapting to diverse device connection needs.
• Robust Safety & Durability: Equipped with overvoltage protection (prevents damage from abnormal input voltage) and anti-burnout protection (withstands continuous wave power ≥10W). It also meets GJB150A rain test requirements, ensuring reliability in harsh conditions.
• Wide Voltage Adaptability: Supports an input voltage range of 6~33V, compatible with various power supplies in industrial and unmanned scenarios, reducing power matching constraints.
• Low Cost & High Integration: Integrates antenna array, anti-jamming components, and navigation receiver into one unit, replacing conventional positioning terminals and active antennas—simplifying system configuration and lowering overall costs.

The device is mainly used to enhance the security and stability of satellite navigation systems, protecting user terminals from interference. Its typical application scenarios include:

• Time Synchronization Security: Applied in power grids, telecommunications networks, and financial systems to provide interference-free timing signals—critical for the stability of power transmission, communication signal synchronization, and financial transaction time stamping.
• Navigation for Unmanned Systems: Provides reliable navigation support for civilian drones, unmanned cars, and unmanned ships. It prevents navigation deviations caused by interference, ensuring safe operation during tasks like aerial surveys, autonomous driving, and maritime patrols.
• Fleet Defense Navigation: Used in vehicle fleets (e.g., industrial transport fleets, security patrol fleets) to maintain stable navigation in complex electromagnetic environments, avoiding mission disruptions due to navigation failures.
• High-End Logistics Navigation: Enhances the navigation accuracy and anti-interference capability of high-value cargo transport vehicles/equipment. It ensures the efficiency and safety of cargo transportation by preventing interference-induced navigation errors.

A1: It supports four satellite systems: BDS (BeiDou), GPS, GLONASS, and GALILEO. The supported civil frequency bands (civil codes) are BDS-B1i, BDS-B1c, GPS-L1, GLO-G1, and GAL-E1. The corresponding operating frequencies are: BDS-B1 (1561.098MHz), GPS-L1/GAL-E1 (1575.42MHz), and GLO-G1 (1602MHz).

A2: Its anti-interference performance is as follows:

• Signal-to-interference ratio: ≥110dB for single interference, ≥100dB for three interferences, and ≥90dB for six interferences.
• It can suppress multiple suppressive interferences, including narrowband interference, broadband interference, pulse interference, sweep frequency interference, and Gaussian interference—covering BDS-B1, GPS-L1, GLO-G1, and GAL-E1 frequency bands.

A3: Two connection methods are available (choose one):

• Serial Port Connection: Use a DuPont line TTL serial port to connect to the flight controller’s GNSS serial port. Connect the “TX" end of the data cable to the flight controller’s “RX" interface, the “RX" end to the flight controller’s “TX" interface, and the “GND" end to the flight controller’s “GND" interface.
• RF Port Connection: Use an SMA cable to connect the product’s RF port (only the middle RF port is available currently) to the drone locator’s antenna port. Note: Ensure the connected device’s interface does not supply power exceeding 5V to avoid power conflicts or device damage.

A4: The product uses an XT30 power connector, with an input voltage range of 6~33V (do not exceed 33V to prevent damage). Its maximum power consumption is ≤25W.

A5: Yes, it supports software upgrades. You can upgrade the anti-jamming module and receiver module via the TTL-level serial port (pins TXD0/RXD0, designated as the upgrade serial port).

A6: It outputs positioning, navigation, and timing information in compliance with the NMEA0183 protocol, which is compatible with most flight controllers and satellite navigation devices.

A7: Use M3 screws to install and secure the product to the platform carrier (e.g., drone body, unmanned vehicle chassis). Ensure the installation is firm to avoid damage to internal components caused by vibration.

A8: The product has strong environmental adaptability:

• Operating temperature: -40℃ ~ +55℃;
• Storage temperature: -55℃ ~ +70℃;
• Relative humidity: 96% (at 40℃, non-condensing);
• Rain resistance: Meets the requirements of the GJB150A rain test.

A9: It includes two key safety protections:

• Overvoltage protection: Prevents damage caused by excessive input voltage;
• Anti-burnout protection: Withstands continuous wave power ≥10W to avoid component burnout due to strong interference.

A10: Its external dimensions are Φ220mm * 29.5mm (circular shape), and its weight is ≤1200g. The color is French grey, suitable for integration into various industrial and unmanned device designs.