Wuxi Jungu Technology Co., Ltd.
| Elasticity | High elasticity |
| Adhesion | Strong adhesion to metal, glass, concrete, and plastics |
| Application Method | Gun applied / Manual |
| Packaging Details | Different packaging methods are adopted according to different modes of transport. |
| Curing Time | 24 hours (full cure) |
| Chemical Resistance | Resistant to oils, solvents, and chemicals |
| Payment Terms | L/C, T/T, D/P, D/A |
| Base Material | Silicone / Polyurethane / Hybrid (depending on specific product) |
| Model Number | 1098 |
| Brand Name | Guibao |
View Detail Information
Explore similar products
Guibao 1099 High-performance Silicone Structural Sealant
Product Specification
| Elasticity | High elasticity | Adhesion | Strong adhesion to metal, glass, concrete, and plastics |
| Application Method | Gun applied / Manual | Packaging Details | Different packaging methods are adopted according to different modes of transport. |
| Curing Time | 24 hours (full cure) | Chemical Resistance | Resistant to oils, solvents, and chemicals |
| Payment Terms | L/C, T/T, D/P, D/A | Base Material | Silicone / Polyurethane / Hybrid (depending on specific product) |
| Model Number | 1098 | Brand Name | Guibao |
Product features:
Single-component, room-temperature curing, easy to use, with good extrudability and thixotropy;
High elasticity, high elongation rate, excellent stretch and compression recovery ability, displacement capacity up to 100/50 level;
Outstanding resistance to weathering, excellent resistance to ultraviolet rays, ozone, rain, ice and snow;
Excellent resistance to high and low temperatures;
Excellent adhesion, no need for primer, good adhesion to most materials.
Main application
High-rise and super-high-rise curtain walls, large-sized metal (aluminum plate) and glass curtain wall weatherproof sealing;
Suitable for occasions with particularly high requirements for sealing safety and other various applications.
Execution standard
GB/T 22083-2008
ASTM C920-18
GB 33372-2020
Packaging specification
590ml soft film packaging.
Usage Restrictions
1.It cannot be used as structural adhesive.
2.It is not suitable for all materials that may seep out oils, plasticizers or solvents;
3.It is not suitable for enclosed or poorly ventilated areas, frosty or damp surfaces, as well as places that are continuously submerged in water or constantly damp;
4.When used on porous materials (such as stone, concrete, etc.), it must be negotiated with the manufacturer and approved by the manufacturer; otherwise, it cannot be used;
5.It is not suitable for copper, lead, or galvanized metal surfaces.
Specification
| Test Item | Sub-item | Technical Requirement (LM) | Technical Requirement (HM) | Test Result (LM) | Test Result (HM) | Test Standard |
|---|---|---|---|---|---|---|
| Sag | Vertical placement, mm | ≤3 | ≤3 | 0 | 0 | GB/T 13477 |
| Horizontal placement | No deformation | No deformation | No deformation | No deformation | GB/T 13477 | |
| Extrudability, ml/min | — | ≥80 | ≥80 | 685 | 696 | GB/T 13477 |
| Tack-free time, h | — | ≤3 | ≤3 | 1.5 | 1.5 | GB/T 13477 |
| Elastic Recovery Rate, % | — | ≥70 | ≥70 | 87 | 89 | GB/T 13477 |
| Tensile Modulus, MPa | 23℃ | ≤0.4 | >0.4 or >0.6 | 0.38 | 0.8 | GB/T 13477 |
| -20℃ | ≤0.6 | >0.4 or >0.6 | 0.57 | / | GB/T 13477 | |
| Cyclic Adhesion | — | No failure | No failure | No failure | No failure | GB/T 13477 |
| Adhesion after Cold Tensile & Thermal Compression | — | No failure | No failure | No failure | No failure | GB/T 13477 |
| Adhesion after Water Immersion & UV Exposure | — | No failure | No failure | No failure | No failure | GB/T 13477 |
| Cyclic Adhesion after Water Immersion | — | No failure | No failure | No failure | No failure | GB/T 13477 |
| Thermal Aging | Mass loss after thermal aging, % | ≤10 | ≤10 | 3.9 | 4.1 | GB/T 16776 |
| Cracking | None | None | None | None | GB/T 16776 | |
| Chalking | None | None | None | None | GB/T 16776 |
FAQ
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1993
Total Annual:
6500000-7500000
Ecer Certification：
Verified Supplier
Wuxi Jungu Technology Co., Ltd. is a professional manufacturer and global supplier of silicone sealants, butyl rubber adhesives, EPDM bonding glue and construction sealing materials, located in Wuxi, Jiangsu Province, China. We integrate independent R&D, modern production, strict quality inspect... Wuxi Jungu Technology Co., Ltd. is a professional manufacturer and global supplier of silicone sealants, butyl rubber adhesives, EPDM bonding glue and construction sealing materials, located in Wuxi, Jiangsu Province, China. We integrate independent R&D, modern production, strict quality inspect...
Get in touch with us
Leave a Message, we will call you back quickly!