MIPI Interface 5.5 Inch HD+ TFT LCD Display Screen 720x1440 Resolution For POS

5.5-Inch PCAP TFT Display, High-Brightness CTP TFT Display

Super Low-Cost High-Brightness 5.5-Inch CTP TFT Display with MIPI Interface, 12 O'Clock Viewing Direction

Product Introduction 

The Jingtai Liquid Crystal Display Technology model JT-5.5IPSHD+INCELL is a 5.5-inch PCAP TFT display with an IPS type panel and a 12 o’clock viewing direction. It features a high resolution of 720 × 1440 pixels. This TFT LCD module integrates an ST7123PI or equivalent controller IC, supporting MIPI interfaces. The module operates at a typical voltage of 2.8V, with a Vdd range of 2.4V to 3.3V.

The JT-5.5IPSHD+INCELL incorporates a capacitive touch panel, available in both single-touch and multi-touch versions. This portrait-mode TFT LCD module offers a standard luminance of 250 cd/m². Landscape mode orientation and higher luminance options are available upon request—please contact us for technical support.

The JT-5.5IPSHD+INCELL TFT touch display is widely used in various applications, including meters and instruments, GPS devices, POS terminals, cash readers, scanners, home automation systems, conference phones, analyzers, home appliances, and security systems.

5.5 inch HD+ 720*1440 TFT Touch Display Module Drawing

FAQ

Q1: Can I place a sample order?

JINGTAI: Yes, we welcome sample orders for quality testing and verification. Mixed samples of different product models are acceptable.

Q2: What is the lead time?

JINGTAI: For off-the-shelf products: Samples are available immediately from stock. Sample remaking takes 1–1.5 weeks, and mass production requires 4–6 weeks. For design-in products: We provide a counter drawing proposal within 2–3 days. Sample production takes about 2-3 weeks after drawing approval. Trial-run or mass production begins within 5–6 weeks after sample approval.

Q3: Is there a MOQ for samples and production orders?

JINGTAI: We have low MOQ requirements. Sample orders of 3–5 pieces are acceptable. For mass production, the standard MOQ is 1,000 pieces per lot. We also support quantities below the mass production MOQ for trial-run or pre-production orders.

Q4: How are the goods shipped, and how long is the delivery time?

JINGTAI: We ship via DHL, UPS, FedEx, or TNT, with delivery typically taking 5–7 days. Air freight and sea shipping are also available.

Q5: What is the procedure for ordering an LCD module?

JINGTAI: First, provide us with your requirements or application details. Second, we provide a quotation based on your needs or our recommendations. Third, you confirm the samples and place a deposit for the formal order. Finally, we proceed with production.

Q6: Can I have my logo printed on the LCD product?

JINGTAI: Yes. Please formally notify us during the design stage, and we will produce samples with your logo for testing and approval. Mass production will follow the approved samples.

Q7: Do you provide a product guarantee?

JINGTAI: Yes, we offer a 1-year warranty on our products.

Q8: How do you handle faulty products?

JINGTAI: First, our products are manufactured under a strict quality control system, with a defective rate of less than 0.2%. Second, during the warranty period, we will replace faulty units with new ones for small quantities along with new orders. For defective batch products, we will repair and return them, or discuss solutions—including recall—depending on the actual situation.