Horizontal Fluidizing Dryer XF Series Industrial Equipment for Drying Food Grain

Product Specification

Industrial Horizontal Fluidized Bed Dryer For Food Grain Feed Powder Drying Processing

XF Series Horizontal Fluidized Bed Dryer

Product Overview

The XF series horizontal fluidized bed dryer, also known as fluidized bed dryer, consists of air filter, heater, horizontal fluidized bed mainframe, cyclone separator, bag filter dust collector and high-pressure induced draft fan. Matching dust removal equipment can be configured flexibly according to material characteristics. Cyclone separator can be used alone for materials with large specific gravity such as instant granules; combined cyclone separator and bag filter dust collector with pneumatic feeding and belt conveyor feeding system are equipped for fine powder and small granular materials with low specific gravity.

Granular solid raw materials are delivered to the dryer via a feeder. Filtered and heated clean hot air enters the bottom of the fluidized bed, passing through the distribution plate to contact the materials and form a fluidized state for heat and mass transfer. Dried finished materials are discharged through the outlet. Exhaust gas from the top of the dryer passes through a cyclone separator and bag filter to recover entrained powder, before being vented to the atmosphere.

Steam, electric and hot blast stove heating modes are all optional based on customer demands. It applies to drying of granular & pelleted materials including pharmaceutical API, tablet granules, TCM granules, plastic resin, citric acid and other powder/granular chemical raw materials; also widely used in food beverage additives, grain deep processing, corn germ, feed and other industries. The maximum particle size of processable material is 6mm, optimal processing particle range is 0.5-3mm. The machine supports fully automatic continuous drying production.

Product Features & Advantages

• Supports continuous automatic production and enables stable, non-stop drying operation.

  
  

• Features rapid drying at low temperatures to effectively preserve the quality of processed materials.

  
  

• Fully meets GMP standards for pharmaceutical manufacturing production.

  
  

• Multiple heating options available: steam heating, electric heating, hot blast stove heating

  
  

• Flexible dust recovery collocation: single cyclone separator, cyclone + bag filter composite dust removal system

  
  

• Two model structures (Model A / Model B) to match different production line layout requirements

  
  

• Complete supporting configuration options: trough mixer, swing granulator, belt conveyor, vibrating screen for integrated production line

  
  

• Wide applicable material range: pharmaceutical, chemical, food, grain, feed raw materials with particle size 0.5~6mm

  
  

• Stable fluidization state, uniform moisture removal, consistent finished product quality

  
  

• Customizable non-standard large-size fluidized bed equipment for large-capacity production demands

Technical Parameters

Note: These parameters are for reference only and may change according to URS.

Different kinds of products are available in our company. We're pleased to receive your inquiry and will reply as soon as possible. We adhere to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for management and "zero defect, zero complaints" as our quality objective.