Kimpok Technology Co., Ltd
| Payment Terms | T/T, PayPal or western Union |
| Supply Ability | 3,000 pieces per month |
| Delivery Time | 3-7 work days |
| Packaging Details | International standard packing |
| Type | Wireless video transmission |
| Frequency | 3.3Ghz(3170MHz-3470MHz) |
| RF Power | 4W(25mW,4000W) |
| Channel | 16 channels |
| Protocol | IRC Tramp |
| Power Supply | 7-36V DC |
| Brand Name | Kimpok |
| Model Number | KP-T3340B |
| Certification | CE Cerfication |
| Place of Origin | China |
View Detail Information
Explore similar products
AirLinK-T 3.0-3.9GHz 10W High Power FPV VTX, 80CH Long Range Video Transmitter
3.3Ghz 4W UAV Video Transmitter 3.3G 16CH FPV VTX for FPV RC Drone Long Raneg
AKK TX5000AC 5W FPV VTX 5.8G 5000mW Drone Video Transmitter 4.9G-6G 96CH
PEAK T89 VTX VRX 4W High-Power FPV Video Transmitter with 64CH and 8.0GHz–8.8GHz
Product Specification
| Payment Terms | T/T, PayPal or western Union | Supply Ability | 3,000 pieces per month |
| Delivery Time | 3-7 work days | Packaging Details | International standard packing |
| Type | Wireless video transmission | Frequency | 3.3Ghz(3170MHz-3470MHz) |
| RF Power | 4W(25mW,4000W) | Channel | 16 channels |
| Protocol | IRC Tramp | Power Supply | 7-36V DC |
| Brand Name | Kimpok | Model Number | KP-T3340B |
| Certification | CE Cerfication | Place of Origin | China |
| High Light | UAV 4W VTX Module ，UAV VTX Module ，3.3GHz Wireless Video Transmitter | ||
3.3G 4W UAV VTX 3.3Ghz Wireless Video Transmitter Image Transmission 16CH VTX Module
I. Specifications
1. 3.3GHz 16 CH:3170MHz-3470MHz
2. Max power: 4W (25mW/2000mW/4000mW, adjustable)
3. Input voltage: DC 7V-36V, supporting 2-8S battery input
4. Antenna connector: SMA Mother seat inner hole
5. Smart audio: IRC Tramp
6. Heat-dissipating method: aluminum alloy shell, heat sink&fan
7. Hole spacing: 20mm*20mm/ø2mm
8. Dimension: 53mm*28.85mm*16mm
9. Weight: 25.85g
II. Function Introduction
1. Channel indicator: Red LED
2. Band indicator: Blue LED
3. Power indicator: Green LED
4. Band & Channel changer button
5. Power changer button
6. 1.0 6P Power connector
7. SMA Mother seat inner hole
III.Control Method and LED Indicator
1. Button ④ is used to switch band and channel; every time when button ④ is pressed for a short time to switch to the next channel, the red LED ①will flash, 1.2.3.4.5.6.7.8 in turn. The operation can be cyclic; see the following diagram for details!
| Short press button ④ to switch channel | |||||||||
| Red LED | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | |
| Flash once | Flash twice | Flash for 3 times | Flash for 4 times | Flash for 5 times | Flash for 6 times | Flash for 7 times | Flash for 8 times | ||
2. Long press button ④ to switch frequency bands. Long press for 5 seconds and the corresponding blue LED will flash, indicating frequency groups A and B in sequence. This operation can be repeated; see the figure below for details!
| Press and hold button ④ to switch channels | ||
| Blue LED | Band A | Band B |
| Flash once | Flash twice | |
3. Button ⑤ is the power adjustment button. Each short press switches the power by one level, cycling between 25mW, 2000mW, and 4000mW. The green LED is the power indicator light, with the following statuses as shown in the figure below: 25mW flashes once, 2000mW flashes twice, and 4000mW flashes three times. Holding the button for 3 seconds enters pit mode, with the green light staying on. See the figure below for details!
| Short press button ⑤ Power switch | ||||
| Green LED | Pit Mode | 25mw | 2000mw | 4000mw |
| Everlasting brightness | Flashes 1 time | Flashes twice | Flashes three times | |
III. Notice for Use:
1. The VTX must be installed with space to ensure that the air convection around the module to ensure that the module heat dissipation; otherwise, the module overheating protection start, reduce the power to transmit, or even shut down the power to transmit.
2. It is recommended that before turning on the power, to ensure that the correct voltage range, positive and negative poles are correct, so as not to burn components.
3. It is recommended that before turning on the power, make sure that the RF RF output has been installed antenna, which can extend the life of the module.
4. Please read the instruction manual before use, so that you can correctly wire and extend the module service life.
Company Details
Business Type:
Manufacturer
Year Established:
2016
Total Annual:
1000000-9000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Established in 2016 and based in Shenzhen, China, Shenzhen Kimpok Technology Co., Ltd. is a professional manufacturer specializing in the R&D, production, sales, and service of wireless video transmission systems. The company’s core product portfolio includes FPV video tr... Established in 2016 and based in Shenzhen, China, Shenzhen Kimpok Technology Co., Ltd. is a professional manufacturer specializing in the R&D, production, sales, and service of wireless video transmission systems. The company’s core product portfolio includes FPV video tr...
Get in touch with us
Leave a Message, we will call you back quickly!