Shenzhen KangLiBang Technology Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 20kg/barrel |
| Delivery Time | 15 |
| Temperature Resistance | Up to 600°F |
| Solubility In Water | Insoluble |
| Flash Point | >200°F |
| Chemical Resistance | Resistant to most chemicals |
| Shelf Life | 1 year |
| Odor | Slight odor |
| Food Grade | Yes |
| Curing Time | 1-2 minutes |
| Specific Gravity | 0.85-0.95 |
| Ph | 7.0-9.0 |
| Voc Content | Less than 20% |
| Non-Staining | Yes |
| Appearance | Clear liquid |
| Application Method | Spray, wipe or dip |
| Certification | SDS |
| Place of Origin | SHENZHEN |
View Detail Information
Explore similar products
Clear RTV Mold Release Primer Liquid For Silicone ABS Bond Reinforcing
Mould Rubber Product Silicone Release Gel Agent Water Based OEM
Food Grade Resin Silicone Mold Release Emulsion For Moulding Compression
Fireproof Mold rTV Silicone Release Agent Coating For Silicone Rubber Product
Product Specification
| Payment Terms | T/T | Supply Ability | 20kg/barrel |
| Delivery Time | 15 | Temperature Resistance | Up to 600°F |
| Solubility In Water | Insoluble | Flash Point | >200°F |
| Chemical Resistance | Resistant to most chemicals | Shelf Life | 1 year |
| Odor | Slight odor | Food Grade | Yes |
| Curing Time | 1-2 minutes | Specific Gravity | 0.85-0.95 |
| Ph | 7.0-9.0 | Voc Content | Less than 20% |
| Non-Staining | Yes | Appearance | Clear liquid |
| Application Method | Spray, wipe or dip | Certification | SDS |
| Place of Origin | SHENZHEN | ||
| High Light | Neutral PH Silicone Release Agent ，Silicone Release Agent Emulsion ，Emulsion mould release for silicone | ||
KANGLIBANG® Release Agent
Product Description
CL-T10, one component, a kind of release agent added in the raw silicones for high temperature cured silicone rubber and fluorinated silicone rubber.It’s easy to disperse and release the silicone rubber from the mold. A small quantity of release agent, large increasing production with high quality.
Application
Be exclusively used in for easy release of finished silicone rubber products from the press mould
Component
1,High polymer siloxane carrier,
2,Composite lubricant
Physical Properties
Appearance: White pasty
Specific Gravity(25℃):1.35
Application Ratio(M-PUR):0.2-0.5%
Attention
l The using ratio can not be exceed 0.2% in the second process if the silicone rubber need to
l printing or coating ink on the surface, more additives will effect the adhesion of silicone ink.
l Avoid eye contact
l Please stored in ventilated place at below 40℃ and far away from heat and open flame.
l Please keep sealing when not in use.
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Kanglibang Science & Technology Co., Ltd was founded in 2010, focusing on the development of new adhesive materials. It is a national-level specialized and special "little giant" enterprise integrating the research and development, manufacturing, sales and service of adhesive ... Shenzhen Kanglibang Science & Technology Co., Ltd was founded in 2010, focusing on the development of new adhesive materials. It is a national-level specialized and special "little giant" enterprise integrating the research and development, manufacturing, sales and service of adhesive ...
Get in touch with us
Leave a Message, we will call you back quickly!