5.8G 5W VTX Transmitter with 16CH for Long-Range High-Power FPV Drone Image

5.8G 5W VTX Transmitter with 16CH for Long-Range High-Power FPV Drone Image Transmission

Product Description:

- Weight: 22g (excluding antenna)

- Dimensions (L*W*D): 41*30*13mm (excluding button protrusion). Mounting holes 20*20mm spacing, M1.6 threaded holes.

- Operating Voltage: DC7V-36V (2s-8s)

- Operating Current: 800MA±100MA at 12V

- Maximum Power Consumption: 10W

- RF Transmit Power: Greater than 34dBm (4W)

- 64 operating channels, button selection setting

- 7 power levels, button selection setting

- 5.8GHz video transmission transmitter (PAL and NTSC compatible) Compact structure, small size, high transmit power - Employs large-scale integrated circuits and automotive-grade components for high reliability - Built-in frequency phase-locked loop, low harmonic radiation, high reliability and stability. Uses digital phase-locked loop circuit, no temperature drift.

New 5W image transmission version, brand new solution, not out of stock, low cost, high power, sufficient power.

It uses two SE5004L amplifiers, connected in parallel using an RF power divider, theoretically achieving 5W power. However, due to power loss from the power divider, the actual power will not reach 5W; actual power is between 4.0-4.2W.

Channel list, usage instructions are the same as for 2.5W.

Beginners should not purchase this; higher power outputs increase the risk of burnout if handled carelessly.

Connect the antenna before powering on. Power is at its minimum; manually press the button to increase power. For automatic power setting upon startup, use the OSD parameter adjustment interface for automatic flight controller settings!

Do not operate at maximum power for extended periods on the ground. Prolonged high-temperature operation increases the probability of burnout. The amplifier will shut down due to overheating protection after approximately three minutes on the ground. For foam-type aircraft, do not place the unit in a sealed cabin, as this may trigger overheat protection during flight.

 Interface Definitions

1. DC-IN: Positive power input for image transmission, supporting range 7-36V.

2. GND: Analog video signal input.
3. VIDEO: OSD parameter adjustment communication data line, supporting protocols TBS and SmartAudio.
4. DATA: Negative output for image transmission.
5. GDN: Positive output for image transmission, maximum output current 350mA. Note: When connecting to wide voltage cameras like the 5-12, the 6.5V-OUT may result in insufficient camera power supply voltage and no image.

Detailed pictures:

Packing and Shipping:

Standard packaging

FAQ:

What is the brand name of this FPV Drone Accessory?

The brand name of this FPV Drone Accessory is Klesman.

What is the model number of this FPV Drone Accessory?

The model number of this FPV Drone Accessory is Model Number.

Where is this FPV Drone Accessory made?

This FPV Drone Accessory is made in China.

Is this FPV Drone Accessory CE certified?

Yes, this FPV Drone Accessory is CE certified.

What is the minimum order quantity for this FPV Drone Accessory?

The minimum order quantity for this FPV Drone Accessory is 20 pieces.

How much does this FPV Drone Accessory cost?

This FPV Drone Accessory costs 32 USD.

What are the packaging details of this FPV Drone Accessory?

The packaging details of this FPV Drone Accessory are 15cm*15cm*8cm.

What is the delivery time for this FPV Drone Accessory?

The delivery time for this FPV Drone Accessory is 5-8 days.

What are the payment terms for this FPV Drone Accessory?

The payment terms for this FPV Drone Accessory are T/T.

What is the supply ability of this FPV Drone Accessory?

The supply ability of this FPV Drone Accessory is 100 pieces per hour.