Pixhawk 2.4.8 PX4 PIX 32-bit APM complete flight control autopilot quadcopter

Pixhawk 2.4.8 PX4 PIX 32-bit APM complete flight control autopilot quadcopter/multi-axis system

Product Description:

A new generation of 32-bit processor flight controllers has arrived, integrating PX4FMU + PX4I on a single board.

PIXHAWK integrates the latest 32-bit chip and sensor technologies, overcoming the limitations of current APMs with only 8-bit CPUs and excessive CPU usage. Furthermore, our store has further optimized the power circuitry, removing unnecessary components for more stable flight.

5IMX Sharing Post: http://bbs.5imx.com/bbs/forum.php?mod=viewthread&tid=888042&extra=&page=1

Official Link: http://pixhawk.org/zh/start

Features:

1. Advanced 32-bit ARM CortexM4 high-performance processor, capable of running the NuttX RTOS real-time operating system;

2. 14 PWM/servo outputs;

3. Bus interfaces (UART, I2C, SPI, CAN);

4. Integrated backup power supply and failover controller, allowing safe switchover to backup control in case of main controller failure;

5. Provides automatic and manual modes;

6. Provides redundant power input and failover functionality;

7. Multi-color LEDs;

8. Provides a multi-tone buzzer interface;

9. Micro SD card for recording flight data;

Hardware Specifications:

Processor

1. 32-bit 2MB Flash STM32F427 1. Cortex M4 with hardware floating-point processing unit

2. Clock speed: 168MHz, 256K RAM

3. 32-bit STM32F103 backup coprocessor

Sensors

1. L3GD20 3-axis digital 16-bit gyroscope

2. LSM303D 3-axis 14-bit accelerometer/magnetometer

3. MPU6000 6-axis accelerometer/magnetometer

4. MS5611 high-precision barometer

Interfaces

1. 5 UARTs (1 high-voltage compatible, 2 with hardware flow control)

2. 2 CANs

3. Spektrum DSM/DSM2/DSM-X satellite receiver compatible input

4. Futaba SBUS compatible input and output

5. PPM signal input

6. RSSI (PWM or voltage) input

7. I2C

8. SPI 9. 3.3V and 6.6V ADC Inputs

10. External Micro USB Interface

Key Design Points

• High performance STM32H743 Processor with more computing power & RAM
• New cost-effective design in a small form factor
• IMU redundancy with sensor technology
• Integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
• IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs

Detailed pictures:

Standard packaging

Full Package List:

- 1 x Pixhawk Flight Controller V2.4.8

- 1 x New Mini m8nGPS

- 1 x Safety Switch

- 1 x Buzzer

- 1 x 6-Pin 6-Pin Cable

- 1 x 4-Pin 4-Pin Cable

- 1 x 3-Pin DuPont Cable

- 1 x SD Card

- 1 x Power Module

- 1 x Folding Stand

- 1 x I2C Splitter Board

- 1 x PPM Decoder

- 1 x RGB Indicator Light

- 1 x Drone Shock Absorber

- 1 x Mini OSD

- 1 x 100MW Data Transmitter

FAQ:

What is the brand name of this FPV Drone Accessory?

The brand name of this FPV Drone Accessory is Klesman.

What is the model number of this FPV Drone Accessory?

The model number of this FPV Drone Accessory is Model Number.

Where is this FPV Drone Accessory made?

This FPV Drone Accessory is made in China.

Is this FPV Drone Accessory CE certified?

Yes, this FPV Drone Accessory is CE certified.

What is the minimum order quantity for this FPV Drone Accessory?

The minimum order quantity for this FPV Drone Accessory is 20 pieces.

How much does this FPV Drone Accessory cost?

This FPV Drone Accessory costs 32 USD.

What are the packaging details of this FPV Drone Accessory?

The packaging details of this FPV Drone Accessory are 15cm*15cm*8cm.

What is the delivery time for this FPV Drone Accessory?

The delivery time for this FPV Drone Accessory is 5-8 days.

What are the payment terms for this FPV Drone Accessory?

The payment terms for this FPV Drone Accessory are T/T.

What is the supply ability of this FPV Drone Accessory?

The supply ability of this FPV Drone Accessory is 100 pieces per hour.