Shenzhen Knowhow Technology Co.,limited
| Payment Terms | ,T/T,Western Union,MoneyGram |
| Supply Ability | 1000 |
| Delivery Time | 5-8 work days |
| Brand Name | MEASTEK |
| Model Number | MDP5300A |
| Certification | CE |
| Place of Origin | SHENZHEN |
View Detail Information
Explore similar products
MDP4070B High Voltage Differential Probes,700V Range,100MHz Bandwidth Floating
MEASTEK MDP4070C High Voltage Differential Probe 700V 200MHz Electronics Test
MEASTEK MDP4150B 100MHz High Voltage Differential Probe, ±1500V Ultra High
MEASTEK MDP4150C High Voltage Differential Probe 200MHz Bandwidth, 500X
Product Specification
| Payment Terms | ,T/T,Western Union,MoneyGram | Supply Ability | 1000 |
| Delivery Time | 5-8 work days | Brand Name | MEASTEK |
| Model Number | MDP5300A | Certification | CE |
| Place of Origin | SHENZHEN |
MEASTEK MDP5300A High Voltage Differential Probe, 70MHz Bandwidth And ±3000V, For High Voltage Circuit Testing Such As Inverters And New Energy
Key Features:
1. Wide range and high precision
±3000V peak differential voltage covers the test requirements of high-voltage inverters and power electronic equipment
1% accuracy + 70MHz bandwidth, accurately restore signal details
2. Low load effect design
10MΩ differential impedance + 2pF input capacitance, minimize the impact on the circuit under test
3. Intelligent and safe
Dual attenuation ratio switching (100X/1000X), adapting to different voltage levels
Overload protection: >3000Vpk triggers red light alarm, supports automatic waveform saving
USB 5V power supply, plug and play without additional power supply
4. Application scenarios
Industrial control: inverter IGBT module turn-on/off waveform analysis
New energy: lithium battery pack BMS high-voltage differential voltage monitoring
Power electronics: switching power supply primary side high-voltage signal test
Specifications
| Model | MDP5300A |
| Bandwidth (-3dB) | 70 MHz |
| Rise time (ns) | ≤5 |
| Accuracy | 1% |
| Attenuation ratio | 100X/1000X |
| Maximum differential measurement voltage (DC+Peak AC) | 100X ±300Vpk |
| 100X ±3000Vpk | |
| Effective value | 100X ±212Vrms |
| 1000X ±2120Vrms | |
| Maximum input voltage to ground (Vrms) | 600V CATII 1000V CATI |
| Common mode voltage(DC+Peak AC) | ±3000Vpk |
| Input Impedance | Single-ended to ground 5MΩ |
| Two input terminals 10MΩ | |
| Input Capacitance | Single-ended to ground <4pF |
| Two input ends <2pF | |
| CMRR | DC ＞80dB |
| 100kHz＞60dB | |
| 1MHz＞50dB | |
| Noise (Vrms) | 100X ＜100mV |
| 1000X ＜600mV | |
| Delay time | Host: about 9ns |
| BNC cable 1m: about 5ns | |
| Overload indicator voltage threshold | 100X ＞300Vpk |
| 100X ＞3000Vpk | |
| Overload indicator light (red light) | Yes |
| Auto-save function | Yes |
| Terminal load requirement | ≥100kΩ |
| power supply | USB 5V/1A adapter |
Probe Standard Accessories
| Name | Object | Parameters |
| Alligator Clips | | CATIII 1000V CATIV 600V |
| Piston probe clamp | | CATIII 1000V |
| Test Hook | | CATII 1000V |
| Input extension cord | | CATIII 1000V |
| BNC output cable | | BNC male to male output cable (length 1 meter) |
| Power output line | | Length 1 meter |
| Power adapter | USB 5V/1A |
WARNING: To avoid the risk of electric shock or fire, do not use the MDP5700A/ MDP5700B/ MDP5700C probes or hook tip accessories on CAT III or CAT IV circuits. To avoid the risk of electric shock or fire, do not use the MDP5700A/ MDP5700B/ MDP5700C test probes or hook tip accessories on circuits above 7000V when using the MDP5070A/ MDP5070B/ MDP5070C probes.
Use only accessories rated for the application. Substituting other accessories may create a risk of electric shock or burns. Keep the probe body and accessories clean to reduce the risk of electric shock from conductive surfaces.
Packing List
| Name | Quantity |
| High-voltage differential probe | 1 piece |
| Alligator Clips | 1 pair |
| Piston probe clamp | 1 pair |
| Test hook | 1 pair |
| Input extension cable | 1 pair |
| BNC output cable | 1 piece |
| Power output cable | 1 piece |
| Power adapter | 1 piece |
| Test report | 1 serving |
| Warranty card | 1 piece |
| Probe box | 1 piece |
FAQ
Q1: What is the maximum safe working voltage of the MDP5300A?
A1: The voltage to ground is 600V CATII/1000V CATI, the differential voltage is ±3000Vpk (1000X attenuation), it complies with CE/UL safety certification, and has built-in overload protection.
Q2: How to choose the attenuation ratio?
A2: Select according to the voltage being tested:
100X attenuation: Applicable to signals ≤±300Vpk (such as low-voltage inverter drive circuit)
1000X attenuation: Applicable to signals ≤±3000Vpk (such as high-voltage bus, IGBT collector voltage)
Q3: What is the impact of input capacitance on the test?
A3: 2pF differential input capacitance significantly reduces the load effect:
The capacitive reactance of high-frequency signals (such as 50MHz) is only about 1.6kΩ, which is much lower than that of traditional probes (5pF capacitive reactance is about 800Ω)
Measured comparison: Similar probes increase the delay of the rising edge of the IGBT drive waveform by 1.2ns, while the delay of MDP5300A is only 0.3ns
Company Details
Business Type:
Manufacturer
Ecer Certification：
Verified Supplier
Shenzhen Knowhow Technology Co., Ltd. is a high-tech enterprise focusing on the research, development, production and sales of Fume Extractor equipment and industrial Smoke Extractors. The company was founded in Shenzhen, China and is committed to providing efficient and environmentally friend... Shenzhen Knowhow Technology Co., Ltd. is a high-tech enterprise focusing on the research, development, production and sales of Fume Extractor equipment and industrial Smoke Extractors. The company was founded in Shenzhen, China and is committed to providing efficient and environmentally friend...
Get in touch with us
Leave a Message, we will call you back quickly!