Maituo Intelligent Technology Co.，Ltd
| Installation Type | Wall-mounted or embedded |
| System Compatibility | KNX TP1 standard protocol compatible |
| Delivery Time | 7 Days |
| Rated Load | 4 channels * 250V AC / 10A |
| Payment Terms | T/T |
| Outputtype | Relay output |
| Packaging Details | Carton |
| Material | Aluminum / Stainless Steel |
| Power Supply Mode | KNX bus power supply (DC 24V) |
| Model Number | MTN6705-0008S |
| Brand Name | Schneider |
| Certification | CE RoHS |
| Place of Origin | EU |
View Detail Information
Explore similar products
8751003000 Schneider Damper Actuator MD5B-230-S Professional Industrial HVAC
MD20SR-24T Schneider Damper Actuator 20Nm Spring Return On/Off 24V Professional
E8333SRY800ZB_WG Schneider Schneider AvatarOn Zigbee 3-Gang Relay Switch 800W
MTN5139-0000 Schneider Schneider Merten Universal Rotary Dimmer Insert 20-600W
Product Specification
| Installation Type | Wall-mounted or embedded | System Compatibility | KNX TP1 standard protocol compatible |
| Delivery Time | 7 Days | Rated Load | 4 channels * 250V AC / 10A |
| Payment Terms | T/T | Outputtype | Relay output |
| Packaging Details | Carton | Material | Aluminum / Stainless Steel |
| Power Supply Mode | KNX bus power supply (DC 24V) | Model Number | MTN6705-0008S |
| Brand Name | Schneider | Certification | CE RoHS |
| Place of Origin | EU | ||
| High Light | Schneider KNX Master Output Module ，KNX 8x16A actuator module ，Expandable KNX output module | ||
The MTN6705-0008S is an eight channel switch and blind actuator from the Schneider Electric SpaceLogic KNX range, configured as the master device of its family and rated for 250 V, 16 A per channel. It is designed so that the same eight outputs can either switch individual loads or drive blind and shutter motors, with four outputs paired to serve a single motor where that is required, which gives a project the choice between eight switched circuits or four blind drives without changing hardware. The Secure variant adds KNX Secure capability, so commissioning and communication can be protected according to the security requirements now appearing in commercial specifications. As the master it not only contains the application logic but also provides the internal bus and power for expansion modules, and up to two extensions can be connected, which raises the potential total to twenty-four switched loads or twelve blind drives from one addressable device.
| Product type | KNX switch and blind actuator, master module |
| Order number | MTN6705-0008S |
| Range | SpaceLogic KNX, KNX Secure capable |
| Channels | Eight channels, configurable as eight switched outputs or four blind drives |
| Channel rating | 250 V, 16 A per channel |
| Expansion | Master unit supports up to two extension modules, reaching 24 switched loads or 12 blind drives |
| Bus supply | KNX bus powered, 6.5 mA drawn from the bus |
| Role | Master device carrying the application and supplying extension modules |
| Manual operation | Local channel control available on the device for commissioning |
| Configuration | Programmed in ETS using the manufacturer application |
| Mounting | DIN rail inside the distribution board |
| Colour | White |
| Compliance | KNX certified; CE marking and RoHS declarations held by Schneider Electric |
Sizing this device correctly is a question of counting outputs rather than of counting circuits, because a blind motor consumes two outputs and therefore halves the number of drives an eight channel unit can serve. The master and extension hierarchy has a further practical consequence: the application runs on the master, so topology should be planned so that the master sits where its bus connection is convenient and the extensions are physically adjacent, and the cabling between them should be installed with the same care as any other bus wiring. Because the outputs are rated at 16 A, the constraint in a real panel is usually the rating of the upstream protective device and the physical cable size at the terminals rather than the actuator itself, so the load schedule should be checked against the supply arrangement before the board is built. Manual override at the device is valuable during commissioning and worth demonstrating at handover.
Distribution boards in hotels, offices and residential projects use the device where lighting circuits and shading need to be controlled from a single point without a separate actuator for each function.
Company Details
Business Type:
Manufacturer,Seller,Trading Company,Exporter
Year Established:
2019
Total Annual:
800000 USD-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Maituo Intelligent Technology Co., Ltd. has been a professional provider of Building and Home Automation Solutions in China since our establishment. With a focus on delivering intelligent, integrated systems for both commercial buildings and residential spaces, we have forged a strong reputation by ... Maituo Intelligent Technology Co., Ltd. has been a professional provider of Building and Home Automation Solutions in China since our establishment. With a focus on delivering intelligent, integrated systems for both commercial buildings and residential spaces, we have forged a strong reputation by ...
Get in touch with us
Leave a Message, we will call you back quickly!