Maituo Intelligent Technology Co.，Ltd
| Operating Humidity | 0% to 95% non-condensing |
| Response Time | Less than 10 seconds |
| Delivery Time | 7 Days |
| Data Logging | Supports local and cloud data storage |
| Payment Terms | T/T |
| Measurement Range | Temperature: -20°C to 50°C, Humidity: 0% to 100% |
| Packaging Details | Carton |
| Indicator Function | Power, signal transmission |
| Accuracy | ±0.5°C for temperature, ±3% for humidity |
| Model Number | 5123132010 |
| Brand Name | Schneider |
| Certification | CE RoHS |
| Place of Origin | EU |
View Detail Information
Explore similar products
SLPBTXX Schneider SLP Temp/RH Sensor Touchscreen Black Professional Intelligent
Schneider Air Differential Pressure Sensor 0-1000Pa 0-10V 004700320 New
HD5XMSTN Duct Temperature & Humidity Sensor 4-20mA 1.8K for HVAC Automation
SLPWXX2 Schneider SLP VOC Sensor Blank White Professional Intelligent Building
Product Specification
| Operating Humidity | 0% to 95% non-condensing | Response Time | Less than 10 seconds |
| Delivery Time | 7 Days | Data Logging | Supports local and cloud data storage |
| Payment Terms | T/T | Measurement Range | Temperature: -20°C to 50°C, Humidity: 0% to 100% |
| Packaging Details | Carton | Indicator Function | Power, signal transmission |
| Accuracy | ±0.5°C for temperature, ±3% for humidity | Model Number | 5123132010 |
| Brand Name | Schneider | Certification | CE RoHS |
| Place of Origin | EU | ||
| High Light | Schneider STP200-100 hydronic flow thermo element ，100mm rigid stem room sensor ，10k ohm curve type 2 thermo element | ||
Every hydronic control loop inherits the accuracy of the probe that feeds it, which is why the 5123132010 is treated as a measurement instrument rather than an accessory. Catalogued by Schneider Electric inside the STP200 (10 kOhm, curve type 2) range, it carries a stainless-steel stem that is lowered into the water stream through a separate closed pocket, allowing the sensing element to be swapped during maintenance without draining the circuit.
Behind the stem, a moulded, sealed transition separates wet metal from the cable, and the factory-fitted gland protects against condensation, dust, and wash-down spray. As a passive device, it draws no meaningful current, requires no firmware updates, and has no battery replacement schedule—the controller's measuring circuit supplies excitation and reads returning values.
Each unit is checked against a traceable temperature reference before packing, with documentation suitable for commissioning records, handover dossiers, and energy-audit evidence.
The 100 mm stem is the mainstream solution for distribution pipework up to approximately DN80, ensuring the tip reaches the moving core of the flow rather than lingering in the boundary layer along the wall.
| Part Number | 5123132010 |
|---|---|
| Product Code | STP200-100 |
| Product Family | STP200 (10 kOhm, curve type 2) |
| Sensing Element | Passive 10 kOhm thermistor, curve type 2 |
| Signal Path / Wiring | Two/three-wire resistance loop wired to controller analogue input |
| Supply | None required; excited by controller measuring circuit |
| Probe Length | 100 mm (3.94 in.) |
| Temperature Range | Chilled and hot water duty per STP200 curve |
| Accuracy | Matched to standard HVAC control grade for this curve |
| Mounting | Immersion through separate closed pocket (pocket ordered separately) |
| Stem Material | Stainless steel, corrosion resistant |
| Cable | 2 m PVC-sheathed flying lead with 20 mm (0.79 in.) fitting and gland |
| Housing | Sealed plant-room construction, IP-rated against condensation |
| Response | Curve matched to host controller input |
| Approvals | CE, RoHS, REACH; Schneider Green Premium documentation |
On primary and secondary heating mains, this probe provides the controller with a clean supply and return differential—the raw material for delta-T optimization and pump staging. These two functions represent where most savings in a hydronic system are achieved.
Equally suitable for chilled headers serving air-handling units, it enables stable readings that allow plant sequencing of chillers against genuine demand rather than fixed schedules.
With a stem length optimized for standard pockets yet compact enough for normal plant-room manifolds, this variant is frequently held as a spare on site and replaced most often during routine sensor audits.
Company Details
Business Type:
Manufacturer,Seller,Trading Company,Exporter
Year Established:
2019
Total Annual:
800000 USD-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Maituo Intelligent Technology Co., Ltd. has been a professional provider of Building and Home Automation Solutions in China since our establishment. With a focus on delivering intelligent, integrated systems for both commercial buildings and residential spaces, we have forged a strong reputation by ... Maituo Intelligent Technology Co., Ltd. has been a professional provider of Building and Home Automation Solutions in China since our establishment. With a focus on delivering intelligent, integrated systems for both commercial buildings and residential spaces, we have forged a strong reputation by ...
Get in touch with us
Leave a Message, we will call you back quickly!