Petroleum Wax Oil Detector Timing 0 - 99h59min Water Bath RT ～ 95℃±0.5℃ ASTM

Product Specification

SH3554 Petroleum wax oil detector

SH3554 Petroleum wax oil content tester is in accordance with the People's Republic of China standard GB/T3554 "petroleum wax oil content determination method"Designed and manufactured according to the specified requirements, it is suitable for the determination of oil content of petroleum wax whose freezing point is above 30℃ and oil content is not more than 15%.

The main points of the method are as follows: the sample is dissolved in the butanone, cooled to -32℃, the wax is separated out, filtered and the butanone in the filtrate is steamed out, the residual oil is weighed, and the oil content of the wax is calculated.

Note: for some waxes with oil content greater than 5%, this method should not be used if the oil cannot be completely dissolved in the butanone and is stratified.

Main Structure and Characteristics

Main structure and features

(1) Main structure

This instrument is mainly composed of digital display temperature controller, digital display timer, stainless steel bath, compressor, air flow meter and other components of room temperature ~ 95℃ water bath, room temperature ~ -40℃ cold bath and 35℃ evaporation bath.

(2) instrument characteristics

● 95℃ water bath (also known as hot bath), -40℃ cold bath as one of the design device, the instrument left for water bath, right for cold bath, two bath each has 4 holes, can be grouped on the sample test.

● Water bath, cold bath, evaporation bath temperature adjustment and control are adopted digital display temperature controller, temperature adjustment and control is accurate and intuitive.

● Evaporation device into the sample blowing volume is detected by the glass rotor flowmeter, can accurately control the blowing volume according to the specific requirements of the test, blowing time can be set by the timer according to the test time requirements.

Main technical characteristics and parameters

Self provided: electronic balance and pipette

Note: The appearance pictures, dimensions, volume, and weight of the instrument are for reference only. If there are any updates to the instrument, there may be slight changes and no further notice will be given

Packing list

Instrument Quality Assurance Certificate

Shandong Shengtai Instrument Co., Ltd. provides the following quality assurance for the instruments sold to you:

----The provided instrument materials are brand new, meet quality standards, and have a manufacturer's certificate of conformity;

----The materials and main components provided meet the technical requirements specified in the technical documentation;

----The overall quality assurance period of the equipment is one year (excluding normal wear and tear of vulnerable parts).

----We are responsible for free maintenance of any instrument quality issues that occur during the warranty period. Due to equipment malfunction caused by the user's responsibility, we are responsible for repairing and charging reasonable fees.

----Lifetime discounted supply of parts for equipment, and lifetime maintenance and repair of the entire machine.

----After the expiration of the warranty period, if the user needs maintenance and technical services, we will only charge a cost fee.