Fully Automatic Four Ball Machine Room Temp ～ 250℃ Lubricant Bearing Capacity

Product Specification

SH120 Fully automatic four ball machine

The SH120 fully automatic four ball machine lubricant anti wear tester is mainly used to evaluate the bearing capacity of lubricants in the form of sliding friction under extremely high point contact pressure conditions. Including three indicators: maximum non card bite load Pb, sintering load Pd, and comprehensive wear value ZMZ, different evaluation indicators can be selected according to the various uses of lubricants in practical applications. This four ball friction testing machine can also perform long-term wear resistance tests on lubricants, measure friction coefficients, and record friction and temperature curves.

Special attachments can also be used for simulating end face wear and material testing. The design principle of this machine is based on the loading stability of the lever four ball machine, combined with the loading characteristics of the servo valve. Through the use of servo motors, air springs, and closed-loop control software, it achieves automatic zeroing, automatic loading, automatic holding, automatic testing, automatic unloading, automatic measurement of the diameter of the wear spot and taking photos. With one click operation and data storage, it has fast testing speed, minimal error, good repeatability, no pollution, no noise, and high efficiency.

● GB/T12583-98, Determination of Extreme Pressure Properties of Lubricants (Four Ball Machine Method);

● GB3142-2019, Determination of Load Capacity of Lubricants (Four Ball Method);

● SH/T0189-2017, Determination method for anti-wear performance of lubricating oil (four ball machine method);

● SH/T0202-92, Determination of Extreme Pressure Performance of Lubricating Greases (Four Ball Machine Method);

● SH/T0204-92, Determination method for anti-wear performance of lubricating grease (four ball machine method).

● ZBE34007-87 (Four Ball Anti Wear Test Method)

● Lubrication (four ball machine): GB/T3142, ASTM D2783, DIN 51350, JIS K2519, IP 239, Soviet 9490-75 ASTM D2596,ASTM D2783,ASTM D2266,ASTM D4172

● Extreme pressure (four ball): GB/T12583, ASTM D2783, DIN 51350, JIS K2519, IP 239.

● Wear and tear (four balls): SH/T0189, ASTM D4172, DIN 51350.

2,Main technical parameters:

Note: The appearance pictures, dimensions, volume, and weight of the instrument are for reference only. If there are any updates to the instrument, there may be slight changes without prior notice.

Random accessories

Shandong Shengtai Instrument Co., Ltd. provides the following quality assurance for the instruments sold to you:

----The provided instrument materials are brand new, meet national quality standards, and have a manufacturer's certificate of conformity;

----The materials and main components provided meet the technical requirements specified in the technical documentation;

----The overall quality assurance period of the equipment is one year (excluding normal wear and tear of vulnerable parts).

----We are responsible for free maintenance of any instrument quality issues that occur during the warranty period. Due to equipment malfunction caused by the user's responsibility, we are responsible for repairing and charging reasonable fees.

----Lifetime discounted supply of parts for equipment, and lifetime maintenance and repair of the entire machine.

----After the expiration of the warranty period, if the user needs maintenance and technical services, we will only charge a cost fee.