DONGGUAN LONROY EQUIPMENT CO LTD
| Type | UV TESTER |
| Accuracy | --- |
| Application | Auto Testing |
| customized support | OEM, ODM, OBM |
| power | 1000w, Electronic |
| Protection Class | IP57 |
| Voltage | 220 V |
| warranty | 1year |
| Product name | Touched Screen Melt Flow Index Tester |
| Test Methods | MFR+MVR Methods |
| Standard | ISO 1133 ASTM D1238 |
| Brand Name | LONROY |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Plastic Testing Sample Injection Machine,small Molding Machine Plastic Test
ISO 20126 ASTM D256 Charpy Impact Resistance Test Machine for Toothbrush Plastic
ISO 306 Vicat Heat Distortion Temperature Tester ASTM D648 Thermoplastic Vika
LR-A020 Plastic Thermal Deformation Vicat Softening Point Testing Machine/Vicat
Product Specification
| Type | UV TESTER | Accuracy | --- |
| Application | Auto Testing | customized support | OEM, ODM, OBM |
| power | 1000w, Electronic | Protection Class | IP57 |
| Voltage | 220 V | warranty | 1year |
| Product name | Touched Screen Melt Flow Index Tester | Test Methods | MFR+MVR Methods |
| Standard | ISO 1133 ASTM D1238 | Brand Name | LONROY |
| Place of Origin | Guangdong, China | ||
| High Light | ISO 1133 melt flow index tester ，ASTM D1238 plastic testing equipment ，touch screen melt flow tester | ||
ISO 1133 ASTM D1238 Touched Screen Melt Flow Index Tester Plastic Melt Flow Index Testing Equipment
Description:
Used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department.
Standard:
GB/T3682-2000 «Determination of melt flow rate and melt volume flow rate of thermoplastics»
ISO 1133:1997«Determination of melt flow rate and melt volume flow rate of thermoplastics»
ASTM D1238 «Standard Test Method for Determination of flow rate of Thermoplastic Melt by extruded plasticizer»
Test Methods:MFR+MVR Methods
Display mode: 7-inch touch screen controller
Touched Screen Melt Flow Index Tester Testing machine/Plastic melt flow index testing equipment
Product Character:
1.English LCD Touched Screen.Ø
2.Hand and Automatic cutting material.
3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc
4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.
5. Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
8.Have USB connector,can connect computer.
ISO 1133 ASTM D1238 Touched Screen Melt Flow Index Tester Plastic Melt Flow Index Testing Equipment
Specification
| Model | LR-A001-B |
| Loading Barrel parameters | Inner hole Φ9.550±0.025mm |
| Cylinder diameter | Φ2.095±0.005mm
|
| Outlet length | 8.000±0.025mm |
| Temperature range | Room Temperature~450℃ |
| Temperature fluctuation | ±0.2 ℃ |
| Temperature uniformity | ±1℃ |
| Temperature display resolution | 0.1℃ |
| Display resolution | 0.1℃ |
| Time display resolution | 0.1s |
| Displacement accuracy | 0.001mm
|
| Volume timing accuracy | 0.001s
|
| Testing scope of mass method | 0.1-150g/10min
|
| Range of test results by volumetric method | 50-5000cm³/10min
|
| Weight parameters are as follows: | |
| Weight accuracy | ±0.5% |
| Basic configuration
| A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
|
| |
| F 10kg | |
|
| |
| G 12.5kg | |
| H 21.6kg | |
|
| |
| Position detection | |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 min. |
| Material be installed | 1 min. |
| Material sample temperature recovery time | 4 min. |
| When binder set | 1min |
| Output mode | Micro-automatic print output |
| Cut material methods | Hand and Automatic Cut |
| Test load | Eight sets of weights |
| Power | AC220V±10% 50/60HZ |
Accessories List
| No | Name | Qty | Remark |
| 1 | Weight | 1 set | 0.325kg,0.875kgkg,1.835kg,2.5kg,2.915kg,3.475kg,4.615kg,5.0k g |
| 2 | Weight tray | 1pcs | Within level 1 load |
| 3 | Charging hopper | 1pcs |
|
| 4 | Mouth mold cleaning rod | 1pcs |
|
| 5 | Charging bar | 1pcs |
|
| 6 | Cylinder cleaning rod | 1pcs |
|
| 7 | piston rod | 1pcs |
|
| 8 | mouth mold | 1pcs |
|
| 9 | gauze | 2roll |
|
| 10 | Print paper | 2 roll |
|
Standard test force(8 level)
1 level:0.325 kg=(piston rod+weight tray+heat insulation cover+No 1 weight)
=3.187N
2 level:1.200 kg=(0.325+No2 0.875 weight)=11.77 N
3 level:2.160 kg=(0.325+No3 1.835 Weight)=21.18 N
4 Level:3.800 kg=(0.325+No4 3.475Weight)=37.26 N
5 Level:5.000 kg=(0.325+No.5 4.675Weight)=49.03 N
6 Level:10.000 kg=(0.325+No.5 4.675weight+No.6 5.000Weight)=98.07 N
7 Level:12.000 kg=(0.325+No.5 4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
8 level:21.600 kg=(0.325+No.2 0.875weight+No3. 1.835+No.4
3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82 N
Company Details
Business Type:
Manufacturer,Agent,Exporter,Seller
Year Established:
2008
Total Annual:
$5 million -$8 million
Employee Number:
80~200
Ecer Certification：
Verified Supplier
Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to pr... Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to pr...
Get in touch with us
Leave a Message, we will call you back quickly!