Integral Incline Optical Contact Angle Measuring Instrument

Integral incline optical contact Angle measuring instrument

preface 

As we all know, the science and engineering of nanomaterials has become a worldwide research hotspot. The concept of wetting contact Angle is often involved in the research of surface modification of nanomaterials. The so-called contact Angle refers to the Angle formed when the two tangents of the gas-liquid interface and the solid-liquid interface clamp the liquid phase in the solid-liquid three-phase junction point on the solid surface, drop by drop on a solid horizontal plane.

Application field

Tft-lcd panel industry: glass panel cleanliness and coating quality measurement;Quality measurement of TFT printing circuit, color filter, ITO conductor film, etc. 

Research on chemical materials: research and discussion on waterproof and hydrophilic materials;Surface activity and tension and wetness of detergent;Viscosity enhancement and adhesion surface energy measurement.

Integral incline optical contact Angle measuring instrument Product introduction

The instrument of our company is manufactured by modern technology. The instrument is equipped with special CCD digital camera, high resolution zoom microscope and high brightness LED background light source system.Implement micro injection and up and down, left and right precise movement.At the same time also designed a telescopic rod structure table, can adapt to different users material thickness increase occasions.The instrument frame can be adjusted according to the right size of the style, expanding the scope of use of the instrument.The software is equipped with correction function, and the results of multiple tests can be saved in the same report at the same time, so that users can better control the material data.The instrument is beautiful in design, easy to operate and meet the needs of users.It is suitable for users who determine contact Angle in various industries.

Integral incline optical contact Angle measuring instrument Technical parameters:

Contact Angle measuring range: 0-180 °

Accuracy of contact Angle measurement: ±0.10

Measurement range of interfacial tension: 0-1000mn /m;Measuring accuracy: 0.01 mN/m

High precision automatic drip system: high precision industrial micro injection pump;Drop accuracy: 0.1 micron

Contact Angle high precision instrument calibration piece: German original contact Angle Angle calibration standard piece 3°5°8° 60°90°120°115°

Measurement method:

Hardware introduction:

Overall dimension of host: 820mm (length)* 320mm(width)* 580mm(height)

Tilt Angle:0-90degree

Net weight: 18KG

Table size: 120mm*150mm

Table movement: upper and lower 50mm;Around 50 mm;Around 30 mm

Maximum sample size: 10 inches

Sampler movement: upper and lower 100mm;About 100 mm

Industrial lens movement: 180mm before and after (fine tuning 3mm)

Industrial lens: 0.7x * -4.5x high resolution telecentric continuous zoom microscope

CCD: SONY original imported high speed industrial chip;25 frames per second, 60 frames per second, 300 frames per second, 1000 frames per second

Lens Angle can be adjusted: looking up, looking straight up, looking down at multiple perspectives

Light source: LED can adjust the blue tone industrial cold light source;Service life of more than 20,000 hours

Power supply and power: 220V / 60HZ

 National standards:

GB/T 24368-2009(testing of hydrophobic contaminants on glass surface)

SY/ t5153-2007 (determination of wettability of reservoir rocks)

ASTM D 724-99 (2003) (test method for surface wettability of paper)

ASTM d5946-2004 (measurement of contact Angle between plastic film and water)

ISO15989 (measurement of water contact Angle of plastic film and thin film treated with corona)