DONGGUAN LONROY EQUIPMENT CO LTD
| Funnel material | Stainless steel |
| Funnel taper | 60°±0.5 |
| Funnel outlet diameter | 12.7mm |
| Measuring cup volume | 100 ml |
| Measuring cup material | Stainless steel |
| Measuring cup inner diameter | Φ 39 mm |
| Blocking rod material | Stainless steel |
| Scraper material | Stainless steel |
| Measurement range | Dust accumulation density |
| Measurement accuracy | Difference < 1g between measurements |
| Measurement method | Variational funnel method |
| Standard compliance | GB/T 16913.3-2008 |
| Applicable powders | Metal, nonmetal, chemical powders |
| Measurement steps | 5-step process |
| Standard configuration | Densitometer, plug rod, cylinder, measuring cup, scraper, brush |
| Brand Name | lonroy |
| Place of Origin | Guangdong, China |
| Model Number | XF-16913 |
View Detail Information
Explore similar products
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experiment
IEC 60068 IK Vertical Drop Hammer Testing Device Vertical Falling Weight Test
IEC 60068 0.14J Single Impact Hammer
IEC 60068 6 Grade Spring Impact Hammer Electrical Spring Actuated Impact Hammer
Product Specification
| Funnel material | Stainless steel | Funnel taper | 60°±0.5 |
| Funnel outlet diameter | 12.7mm | Measuring cup volume | 100 ml |
| Measuring cup material | Stainless steel | Measuring cup inner diameter | Φ 39 mm |
| Blocking rod material | Stainless steel | Scraper material | Stainless steel |
| Measurement range | Dust accumulation density | Measurement accuracy | Difference < 1g between measurements |
| Measurement method | Variational funnel method | Standard compliance | GB/T 16913.3-2008 |
| Applicable powders | Metal, nonmetal, chemical powders | Measurement steps | 5-step process |
| Standard configuration | Densitometer, plug rod, cylinder, measuring cup, scraper, brush | Brand Name | lonroy |
| Place of Origin | Guangdong, China | Model Number | XF-16913 |
| High Light | chemical powder bulk density meter ，natural bulk density meter ，small bulk density meter | ||
Chemical Powder Bulk Density Meter/natural bulk density meter/variational funnel method
Product Introduction
The natural bulk density meter (variational funnel method) is designed and produced in accordance with the national standard GB/T 16913.3-2008.Used for determination of dust accumulation density.
Widely used in various metal powder, nonmetal powder, chemical powder such as powder metallurgy powder, magnetic material powder, alloy powder, milk powder, abrasive, coating, food additive accumulation density test
Principle: dust falls freely from the funnel to fill the measuring cup at a certain height;The mass of dust per unit volume in the measuring cup under loose loading condition is measured, that is, dust accumulation dens
Chemical Powder Bulk Density Meter/natural bulk density meter/variational funnel method
Instrument structure
Funnel (flow outlet diameter: 12.7mm) | the funnel is made of stainless steel, in which the taper of the funnel is 60°±0.5 |
Blocking rod | stainless steel material, used to prevent dust falling down when dust is put into the funnel. |
measuring cup | this device is equipped with a volume of 100 ml stainless steel cup, cup inner diameter for Φ 39 mm |
scraper | stainless steel, used for dust into the funnel when the removal of excess dust. |
Chemical Powder Bulk Density Meter/natural bulk density meter/variational funnel method
The determination of steps
1. Test the weight m1 of an empty stainless steel measuring cup
2. Plug the funnel with a stick and weigh some powder into the funnel
3. Unplug the plug and leave the powder free downstairs until it completely overflows the measuring cup
4. Use a stainless steel ruler to level off any excess powder in the measuring cup and weigh the cup and powder to m2
5. Calculate the powder deposition density according to the formula: =(m2-m1)/V remark: V corrected volume of measuring cylinder, 100cm3.
Note: The difference between the maximum and minimum dust mass value obtained from three consecutive measurements should be less than 1g, and the average value of three measurements meeting the requirements should be taken as the measurement result.
Standard configuration: densitometer main engine plug rod cylinder measuring cup scraper brush
Company Details
Business Type:
Manufacturer,Agent,Exporter,Seller
Year Established:
2008
Total Annual:
$5 million -$8 million
Employee Number:
80~200
Ecer Certification：
Verified Supplier
Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to pr... Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to pr...
Get in touch with us
Leave a Message, we will call you back quickly!