DONGGUAN LONROY EQUIPMENT CO LTD
| Voltage | 220 V |
| Protection Class | IP67 |
| Displacement Range | 0 ~ 50.00mm |
| Pressure Range | 0 ~ 1000N |
| Test Accuracy | better than 3% |
| Thermal Resistance Range | 0.05 ~ 0.000005m2*K/W |
| Sample Size | ≤Φ30mm |
| Sample Thickness | 0.02 ~ 20mm |
| Thermal Pole Temp | room temperature ~ 299.99℃ |
| Thermal Pole Accuracy | 0.01℃ |
| Cold Pole Temp | 0 ~ 99.00℃ |
| Cold Pole Accuracy | 0.01℃ |
| Thermal Conductivity Range | 0.01 ~ 50W/m*k, 0.1 ~ 300W/m*k |
| Vacuum Pressure | 0.1MPa |
| Thermal Resistance Test | 0.05 ~ 0.000005m2*K/W |
| Brand Name | lonroy |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
PCY-D-III Ultra-low Temperature Thermal Expansion Coefficient Tester Meter
High Quality Carbon Black Content Tester/Carbon Black Content Testing Machine/
DRJ-II Metal High Temperature Thermal Conductivity Test Machine Thermal
BRR-II Geotechnical Specific Heat Capacity Tester Thermal Conductometer
Product Specification
| Voltage | 220 V | Protection Class | IP67 |
| Displacement Range | 0 ~ 50.00mm | Pressure Range | 0 ~ 1000N |
| Test Accuracy | better than 3% | Thermal Resistance Range | 0.05 ~ 0.000005m2*K/W |
| Sample Size | ≤Φ30mm | Sample Thickness | 0.02 ~ 20mm |
| Thermal Pole Temp | room temperature ~ 299.99℃ | Thermal Pole Accuracy | 0.01℃ |
| Cold Pole Temp | 0 ~ 99.00℃ | Cold Pole Accuracy | 0.01℃ |
| Thermal Conductivity Range | 0.01 ~ 50W/m*k, 0.1 ~ 300W/m*k | Vacuum Pressure | 0.1MPa |
| Thermal Resistance Test | 0.05 ~ 0.000005m2*K/W | Brand Name | lonroy |
| Place of Origin | Guangdong, China | ||
| High Light | ASTM D5470 thermal conductivity tester ，vacuum type thermal resistance test equipment ，rubber thermal analyzer with warranty | ||
ASTM D5470 Heat Flow Method Vacuum Type Thermal Conductivity Tester DRL-III-P Rubber Thermal Resistance Test Equipment
1.use
DRL-III thermal conductivity tester mainly tests the thermal resistance of thin thermal conductors, solid electrical insulation materials, thermal conductivity silicone grease, resin, rubber, beryllium oxide porcelain, alumina porcelain and other materials, as well as the contact thermal resistance at the solid interface and the thermal conductivity of the material. The detection material is solid sheet, and the enclosed frame can detect powder state material and paste material.
Instrument reference standards: MIL-I-49456A (insulation sheet, thermal conductivity resin, thermal conductivity glass fiber reinforced), GB5598-2015 (Beryllium oxide porcelain thermal conductivity determination method), ASTMD5470-2017 (thin thermal conductivity solid electrical insulation material heat transfer performance test standard), etc.
Thermal conductivity tester features: with automatic pressure, automatic thickness measurement device, and connected to the computer to achieve automatic control. The instrument adopts 6-point temperature gradient detection to improve the test accuracy. Thermal resistance curves under different pressures can be detected, and multiple parameters such as thermal conductivity, thermal resistance and contact thermal resistance at the interface can be measured by using optimized mathematical models.
Widely used in colleges and universities, scientific research units, quality inspection departments and production plants of material thermal analysis and detection.
ASTM D5470 Heat Flow Method Vacuum Type Thermal Conductivity Tester DRL-III-P Rubber Thermal Resistance Test Equipment
2.Product Parameter
| sample size | ≤Φ30mm |
| sample thickness | 0.02 ~ 20mm |
| thermal pole temperature control range | room temperature ~ 299.99℃, temperature control accuracy 0.01℃ |
| cold pole temperature control range | 0 ~ 99.00℃, temperature control accuracy 0.01℃ |
| thermal conductivity test range | 0.01 ~ 50W/m*k 0.1 ~ 300W/m*k |
| thermal resistance test range
| 0.05 ~ 0.000005m2*K/W
|
| pressure measurement range | 0 ~ 1000N |
| displacement measurement range | 0 ~ 50.00mm
|
| test accuracy
| better than 3%
|
the sample can be tested in the vacuum state to ensure the test environment and accuracy, vacuum 0.1MPa.
Experimental methods: a. Thermal resistance test of samples under different pressures. b, material thermal conductivity test. c. Contact thermal resistance test. 12, computer automatic test, and realize data printing output
Company Details
Business Type:
Manufacturer,Agent,Exporter,Seller
Year Established:
2008
Total Annual:
$5 million -$8 million
Employee Number:
80~200
Ecer Certification：
Verified Supplier
Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to pr... Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to pr...
Get in touch with us
Leave a Message, we will call you back quickly!