K-8000 Handheld Alloy Detector Mini Scrap Metal Detector Rapid Accurate Alloy

K-8000 Handheld Alloy Detector Mini Scrap Metal Detector Rapid Accurate Alloy Elements Analysis and Detection Instrument
Trade description
Non-destructive, rapid and accurate analysis and detection of alloy elements and alloy brand identification; Rapid analysis of the content of more than twenty-five elements ranging from titanium (Ti) to uranium (U).

K-8000 Handheld Alloy Detector Mini Scrap Metal Detector Rapid Accurate Alloy Elements Analysis and Detection Instrument
Product application:

K-8000 Handheld Alloy Detector Mini Scrap Metal Detector Rapid Accurate Alloy Elements Analysis and Detection Instrument
Product features:
1, one-button operation, remove complex operation options, effectively prevent human misoperation;

2, boot to test only needs 45 seconds, 0.8 seconds out of alloy brand and data.

3. The cheapest model on the market, special for recycling scrap metal (scrap stainless steel, scrap tin, scrap brass) (Note: only ordinary alloy mode, no precious metal mode)

K-8000 Handheld Alloy Detector Mini Scrap Metal Detector Rapid Accurate Alloy Elements Analysis and Detection Instrument
Commodity parameter
Technical specifications for K-8000 MINI Handheld spectrometer

1. Excitation source: high-power miniature straight plate electron X-ray tube, excitation voltage is 35kV; No high voltage cables, no RF noise, better X-ray shielding, better heat dissipation.

Fixed voltage 35kV, current 100uA (Moxtek), standard Ag target, no motor, 1 filter

2, detector: Si-pin detector (6 mm2 energy resolution 190eV FWHM)

3, calculation method: KMX-FP no standard sample test method

4, standard with 1 battery

K-8000 Handheld Alloy Detector Mini Scrap Metal Detector Rapid Accurate Alloy Elements Analysis and Detection Instrument
Instrument design features:
1, good heat dissipation: more than 1/2 of the body adopts aluminum alloy shell design, the top of the instrument some trough heat dissipation device, the whole system makes the heat dissipation is very effective, prolong the machine life, X-ray analyzer work more stable, so that the failure rate is very low

2. Simple operation: the design concept of the instrument is simple and economic principle. The hardware uses fixed high pressure, eliminates the internal complex motor and filter, external 316 calibration plate and other simple design; The software adopts simpleton operation interface. Really let the customer with the least cost to get more revenue.

3. Power feedback lamp; Top and bottom radiation warning flashing lights; Diamond-grained soft rubber handle; The instrument has a good balance, can stand on the workbench during the test, without hand help, one-button design, even if the operation for a long time without fatigue; Display to achieve the integrated design of the whole machine, the whole machine structure, PDA is not detachable, dustproof, anti-fog, waterproof, low fault industrial high resolution TFT touch display color screen.

4, accurate test data: automatic analysis standard library has more than 500 standard brands, can analyze up to ten thousand kinds of alloy, user can customize 300 kinds; The compensatory test method for irregular or small samples can detect very small or very small samples, such as the diameter of 0.04mm filaments can be immediately recognized; It can analyze Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Hf, Ta, W, Re, Pb, Bi, Zr, Nb, Mo, Cd, Sn, Sb and other 23 elements