DONGGUAN LONROY EQUIPMENT CO LTD
| customized support | OEM, ODM, OBM |
| warranty | 1 Year |
| Power supply | AC (110~240) V 50Hz |
| Product name | Synthetic Blood Penetration Tester |
| Spray pressure | standard 10.7kpa 16kpa 21.3kpa/adjustable |
| Brand Name | LONROY |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Plastic Testing Sample Injection Machine,small Molding Machine
ISO 20126 ASTM D256 Charpy Impact Resistance Test Machine for Toothbrush
ISO 306 Vicat Heat Distortion Temperature Tester ASTM D648 Thermoplastic Vika
LR-A020 Plastic Thermal Deformation Vicat Softening Point Testing Machine/Vicat
Product Specification
| customized support | OEM, ODM, OBM | warranty | 1 Year |
| Power supply | AC (110~240) V 50Hz | Product name | Synthetic Blood Penetration Tester |
| Spray pressure | standard 10.7kpa 16kpa 21.3kpa/adjustable | Brand Name | LONROY |
| Place of Origin | Guangdong, China | ||
| High Light | synthetic blood penetration tester machine ，blood penetration resistance test equipment ，plastic test machine with warranty | ||
Synthetic Blood Penetration Tester/Blood penetration resistance tester
RH-CT30 Mask synthetic blood penetration tester is used for the determination of penetration performance of synthetic blood and other liquid-derived liquid injection to evaluate its safety and protection performance.It is suitable for the determination of penetration of synthetic blood spatter in surgical mask.It is widely used in medical inspection department, safety inspection department and scientific research unit
Synthetic Blood Penetration Tester/Blood penetration resistance tester
Executive standard:
YY 0469-2011:surgical mask
GB19083-2010:Technical requirements for medical protective masks;
YY/T0691-2008:Method of test for the penetration of synthetic blood (fixed volume, horizontal injection);
Synthetic Blood Penetration Tester/Blood penetration resistance tester
Technical Parameters:
|
Test environment |
temperature (21±5)℃;Relative humidity (85±10)% |
|
Injection distance |
(300±10)mm |
|
Nozzle diameter |
Φ 0.84 mm, 12.7 mm long |
|
Liquid injection speed |
450cm/s;550 cm/s;635 cm/s |
|
Spray pressure |
standard 10.7kpa 16kpa 21.3kpa/adjustable |
|
Power supply |
AC (110~240) V 50Hz |
Product feature:
Air pressure range can be set freely, set range (0.5-- 30)kPa;
Touch screen Chinese display, friendly man-machine interface, aluminum alloy panel, equipped with metal buttons, ensure the instrument durable
3.The sample table is made of 304 stainless steel plate, which is light, clean and rust-free.
4.Constant pressure injection device, no manual adjustment
Test Method:
GB19083-2010Technical requirements for medical protective masks
Synthetic blood penetration test;
Spray 2 mL of synthetic blood into the mask at a pressure of 10.7 kPa (80 mmHg). No infiltration should occur inside the mask.
YY 0469-2011 Synthetic blood penetration test of surgical mask
Spray 2 ML of synthetic blood into the mask at a pressure of 16.0 kPa (120 mmHg). No infiltration should occur inside the mask
YY 0469-2011Synthetic blood penetration test of surgical mask:
Sample size: Three samples were used for the experiment.
Sample pretreatment: the sample was pretreated at least 4 h in the environment of temperature (21 × 5)C and relative humidity (85 × 5)%, and the test was conducted within 1 min after taking out.
Test procedure:The sample is fixed on the sample fixture on the instrument, and the 2 mL table is placed 30.5cm away from the sample center
The surface tension of the synthetic blood was 0.002n /m at a pressure of 16.0 kPa (120 mmHg)
The needle tube with the diameter of 0.84mm was sprayed horizontally to the target area of the sample under test. Visual inspection was conducted within 10 s after removal.
Manufactory Hot Selling Synthetic Blood Penetration Tester
Result Reduction:
Check the inner side of the sample for penetration.If visual inspection is suspicious, use a absorbent cotton swab or similar to rub the inside of the target area and determine if there is synthetic blood penetration.The resulting structure shall meet the standard requirements.
Company Details
Business Type:
Manufacturer,Agent,Exporter,Seller
Year Established:
2008
Total Annual:
$5 million -$8 million
Employee Number:
80~200
Ecer Certification：
Verified Supplier
Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to pr... Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to pr...
Get in touch with us
Leave a Message, we will call you back quickly!