Zirconium Oxide Ceramic Ball Milling Tank Zirconia Planetary Ball Mill jar with

This product is a general-purpose Zirconium Oxide (ZrO₂) Ceramic Jar used for grinding and mixing materials in a planetary ball mill. It consists of the main jar body and a sealing lid, forming a complete containment system for high-energy milling processes. It is a workhorse container in many labs for applications where high purity and wear resistance are required.

Material Composition: The jar is made from Zirconium Oxide (ZrO₂), a type of advanced technical ceramic. It is crucial to note that most high-quality milling jars are actually Yttria-Stabilized Zirconia (YSZ), meaning a small percentage of Yttrium Oxide is added to the zirconia.

Why Stabilization? Pure zirconia undergoes a destructive crystal phase change during heating and cooling. The yttria stabilizer locks the zirconia in a tough, stable phase, preventing it from cracking and giving it exceptional fracture resistance.

• Extreme Hardness: Zirconia is very hard (over 9 on the Mohs scale), making it highly resistant to abrasion from the grinding balls and the sample material. This ensures a long lifespan.
• High Wear Resistance: It wears down very slowly, which minimizes contamination of the sample from the jar itself.
• High Density (~6.0 g/cm³): The dense material increases the impact energy of the grinding balls, leading to more efficient milling and shorter processing times.
• Excellent Chemical Inertness: Zirconia is highly resistant to corrosion from acids, alkalis, and various solvents, making it suitable for both dry and wet milling.
• Low Contamination: The combination of low wear rate and chemical inertness makes it the preferred choice for applications where sample purity is critical (e.g., electronics, pharmaceuticals).

The Lid: Typically made from the same zirconia material or a robust, compatible material like PTFE or POM to ensure a good seal.

The Gasket/O-Ring: The lid incorporates a rubber O-ring (often made of Viton or NBR for chemical resistance) that creates a secure, leak-proof seal. This is essential for:

• Containing fine dust during dry milling.
• Preventing spillage of solvents and slurries during wet milling.
• Allowing the jar to be filled with an inert gas (like Argon) to prevent oxidation of sensitive materials during milling.

This type of jar is used across a wide range of scientific and industrial fields for:

• Size Reduction: Grinding materials down to nano-sized powders.
• Mechanical Alloying: Combining metals into alloyed powders through high-energy impacts.
• Mixing & Homogenization: Blending different powders into a perfectly uniform mixture.
• Mechanochemistry: Inducing chemical reactions through mechanical energy.

• Materials Science: Producing nanocomposites, amorphous alloys, and advanced ceramics.
• Electronics: Synthesizing powders for capacitors, varistors, and battery materials (e.g., cathode powders).
• Pharmaceuticals: Reducing particle size of active ingredients to enhance bioavailability.
• Geology: Pulverizing rock and mineral samples for accurate chemical analysis (XRF, XRD).

• Grinding Balls (Media): You MUST use grinding balls made of the same material (Zirconia). Using a harder media (like tungsten carbide) will rapidly damage and contaminate the jar. The size and quantity of the balls are critical for efficient milling.
• Planetary Mill Compatibility: This jar is specifically designed for planetary ball mills. You must ensure the jar's outer dimensions and volume are compatible with the mounting clamps and the maximum capacity of your specific mill model (e.g., Retsch, Fritsch, MTI, etc.).
• Filling Ratio: For effective operation, the jar should never be filled more than one-third to one-half of its total volume with a combination of grinding balls and material. Overfilling prevents the cascading motion required for effective grinding.
• Capacity: These jars come in various standard sizes (e.g., 50ml, 100ml, 250ml, 500ml, 1L). The choice depends on your required batch size and mill compatibility.

The Zirconium Oxide Ceramic Ball Milling Tank is a premium, durable, and versatile container for high-energy planetary ball milling. Its primary advantages are its exceptional wear resistance and low contamination profile, which are essential for achieving pure, finely ground, and homogeneously mixed materials in research and development laboratories. When paired with the correct zirconia grinding balls and used in a compatible mill, it is a reliable and critical tool for advanced material processing.