Laboratory Three Head Grinding Machine Agate Mortar 370W for Mineral Sample

XPM-Φ120*3 Laboratory Three Head Grinding Machine

The XPM-Φ120*3 three head grinding machine is a dry grinding device for preparing analysis samples. It features no metal contamination to samples, uniform ultra-fine ground material, simple operation and low noise. The machine incorporates advanced domestic and international technology and was awarded the National Quality Silver Medal in 1983. It is standard equipment for analysis, separation, inspection and assay in geology, coal, mining, metallurgy, chemical, building materials and hydropower departments as well as universities and research institutes.

Key Features

• Agate mortar and pestle ensure zero metal contamination of samples
• Three independent clutch grinding heads work simultaneously or separately
• Digital timer control from 0.01s to 99 h for precise grinding time
• Ultra-fine and uniform grinding results with low noise operation
• Adjustable grinding pressure via spiral spring for different materials
• Dividing plates between grinding sets prevent sample cross-contamination
• Simple operation: load, grind, discharge and index positions conveniently

Main Technical Parameters

Structure and Working Principle

The machine consists of three grinding heads, clutches, mortar supports and a positioner, mounted uniformly at 120° intervals on the rotating seat. When the clutch is engaged, the motor drives the grinding heads through the belt pulley, gear shaft and universal joint. The pestle rotates forward while the mortar rotates in the same direction, creating relative sliding motion; the self-weight of the grinding head provides the pressure to grind the material. Each pair of grinding tools has an independent clutch, so the three sets can work simultaneously or individually without affecting each other.

Operation

1. Loading: lift the grinding head, remove the mortar cover, place the material into the mortar, cover and lower the head.
2. Grinding: start the motor and turn the clutch handle clockwise to engage the friction clutch.
3. Discharging: turn the handle counterclockwise to disengage, lift the head, rotate the mortar to the discharge position and brush the powder into the container.
4. Indexing: press the positioner handle to rotate the machine top to the next position at 120° intervals.

Safety and Maintenance

• Always rest the grinding head securely when lifted; lower it gently to avoid damaging the mortar and pestle
• Disengage all three clutches and switch off power after work; cover the machine
• Bearings of motor and grinder need inspection and grease change every 1-2 years
• Never repair or dismantle the machine while it is running; ensure reliable grounding

Quality Inspection

Each machine passes strict factory inspection: friction plate contact area over 2/3, spring adjusted to working pressure, clutch free of sticking, grinding head contact line through mortar center, cone friction wheel and ring contact line over 2/3, smooth rotating seat with accurate positioning, flexible clutch and positioner handles, steady operation without impact noise, temperature rise not exceeding 30°C after 60 minutes continuous no-load running, and reliable grounding. Random accessories and documents are complete.

Packing List

Each XPM-Φ120*3 machine is delivered with: main machine including motor, wrench (F-1-0), user manual, product inspection certificate and product certificate of conformity.

FAQ

Q1: Does the grinding process contaminate the sample with metal?
No. The XPM-Φ120*3 uses agate mortars and pestles, ensuring no metal contamination to samples, which is critical for trace analysis and assay work.

Q2: Can the three grinding heads work independently?
Yes. Each pair of grinding tools has its own independent clutch, so the three sets can work simultaneously, or one or two sets can work alone as required.

Q3: What is the time control range?
The digital timer controls grinding time from 0.01 second up to 99 hours with high precision.

Q4: Can the grinding pressure be adjusted?
Yes. The grinding head pressure is adjustable through the spiral spring tension to suit different materials and fineness requirements.

Q5: How do I prevent sample cross-contamination?
Dividing plates between the three grinding sets prevent samples from mixing with each other during operation.

Q6: What optional models are available?
Besides the Φ120 model, the company also supplies 70g and 100g series agate grinding equipment for different sample volumes.

Company Profile

Y&X Beijing Technology Co., Ltd. was established in 2014 and is headquartered in Beijing, China. As a professional enterprise integrating scientific research, design, new product development, and manufacturing, our mission as a family business is to expand overseas markets and provide comprehensive professional solutions for international mining companies. The company specializes in the research, development, and supply of mineral processing reagents and equipment, with products covering industrial and laboratory mineral processing equipment. Our products are widely used in metallurgy, geology, petroleum, coal, chemical industry, building materials, environmental protection, non-ferrous metal mines, research institutions, and university mineral processing laboratories. Our products have been successfully exported to Russia, Mongolia, Chile, Australia, Zimbabwe, Thailand, Laos, Indonesia, Tanzania, Nigeria and other countries and regions. The company has passed ISO 9001 quality management system certification, ensuring product quality complies with national and enterprise technical standards.