Advanced Instruments Co.,Limited
| Payment Terms | L/C,T/T,D/P |
| Supply Ability | 10sets/month |
| Delivery Time | 90days |
| Packaging Details | Plywood Case |
| After Service | Response in 12 Hours 12 Months |
| Warranty | 1full Year |
| Transport Package | Plywood Case |
| Test Standard | BS 6387;IEC 60331;BS 8491;EN 50200 |
| Gas | Propane,Dry Compressed Air |
| Application | Cable and Wires Testing |
| Color | Grey |
| Operation | Automatic |
| Power Supply | AC380V,50/60Hz,30A |
| Specification | 1500mm×700mm×1200mm(Test Bracket size) |
| Function | Cable Fire Resistance,Shock and Water Spray Tester |
| Test flame temperature | 950±40°C |
| Test Voltage | 100~1000V |
| Brand Name | Advanced Instruments |
| Model Number | AIC-52019BS |
| Certification | BS 6387;IEC 60331;BS 8491;EN 50200 |
| Place of Origin | China |
View Detail Information
Explore similar products
TCCT Electrical Cable Cone Calorimeter Test Heat Release Rate O2 CO CO2
Bunched Cable Vertical Flame Spread Testing Machine For Heat Release by EN 50339
27 Cuber Meter Smoke Density Chamber Test Equipment by IEC 61034
Fire Resistance with Mechanical Shock and Water Spray Test Equipment by BS 6387
Product Specification
| Payment Terms | L/C,T/T,D/P | Supply Ability | 10sets/month |
| Delivery Time | 90days | Packaging Details | Plywood Case |
| After Service | Response in 12 Hours 12 Months | Warranty | 1full Year |
| Transport Package | Plywood Case | Test Standard | BS 6387;IEC 60331;BS 8491;EN 50200 |
| Gas | Propane,Dry Compressed Air | Application | Cable and Wires Testing |
| Color | Grey | Operation | Automatic |
| Power Supply | AC380V,50/60Hz,30A | Specification | 1500mm×700mm×1200mm(Test Bracket size) |
| Function | Cable Fire Resistance,Shock and Water Spray Tester | Test flame temperature | 950±40°C |
| Test Voltage | 100~1000V | Brand Name | Advanced Instruments |
| Model Number | AIC-52019BS | Certification | BS 6387;IEC 60331;BS 8491;EN 50200 |
| Place of Origin | China | ||
| High Light | IEC 60331; EN 50200 ，BS 6387; BS 8491 ，Mechanical Vibration and Fire Resistance | ||
Full standard fire test machine comprehensive GB, lEC and BS standards. The structure and performance of the combustion testmachine contains fire characteristics test, water and fire resistance test and mechanical vibration and fire resistance test. This instrument adopts computer software to control and monitor the test process of the current, voltage, gas flow, the test results ofthe curve can be output to print. lt is suitable for mineral insulated cables with rated votage not exceeding 0.6~1Kv, and can keep the circuit intact for a long timeunder flame conditions. In the national standard fire-resistant based on the addition of the British fire-resistant cable standard BS6387"in the case of fire to keep the circuit intact cable performance requirements specification".
1.2 Related standards
1. BS Fire Resistance Test
1.1 Cable Support System
The cable is horizontally clamped onto one end of the cable sheaththrough a clamp. The middle part of the cable is fixed by two metal rings(spaced 300mm apart), which are grounded to the other metal parts ofthe device. For unarmoured cables with a diameter of less than 10 mmor for other cables that have shifted significantly during the test, threeadditional metal rings are required, each fixed at a distance ofapproximately 150 mm from the original ring.
1.2 Continuous Detection Device
During the test, the current is allowed to pass through all the cores of thecable, a three-phase star connected transformer with sufficient capacityto maintain the maximum allowable leakage current of 2A at the testvoltage. A load is connected to each core wire at the other end of thecable, and a current close to 0.25A is loaded at the rated voltage of thecable.
1.3 BS standard heat source: in line with AGF-1857B, nozzle length610mm burner
1.4 GB standard heat source: in line with AGF-1857B, nozzle length of500mm burners
1.5 Temperature measurement: 1.5 mm diameter armoured thermometerplaced near the air inlet, 75 mm above the burner, parallel to the burner.1.6 Test flame temperature: 950 + 40 °C
1.7 Specimen: The specimen is a section of the finished product, notless than 1200mm, with 100mm of sheath and covering removed at eachend. The wires at both ends of the cable shall be connected inaccordance with the electrical connection.
1.8 Test voltage: 100~1000V adjustable
1.8 Test Current: 100~260mA adjustable
2.Mechanical Vibration Resistance and Fire Resistance Test
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2018
Total Annual:
1,000,000-5,000,000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Advanced Instruments Co.,Limited. is a professional supplier which is committed to offer best testing equipment from China for our clients,and our main products are fire rating testing equipment,petroleum products testing equipment,electrical testing equipment geophysical equipment and general labor... Advanced Instruments Co.,Limited. is a professional supplier which is committed to offer best testing equipment from China for our clients,and our main products are fire rating testing equipment,petroleum products testing equipment,electrical testing equipment geophysical equipment and general labor...
Get in touch with us
Leave a Message, we will call you back quickly!