SKYLINE INSTRUMENTS CO.,LTD
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 1 unit |
| Delivery Time | 7 working days |
| Packaging Details | Alu.box |
| SKYLINE | Sharp Edge Tester |
| Standards | ISO 8124-1 EN-71,ASTM F963 |
| Weight | 3.5 kg |
| Dimensions | 290x180x115 mm |
| Accessories | charging unit, foot switch, one roll of PTFE tape, base plate |
| Warranty | 18 months |
| Brand Name | SKYLINE |
| Model Number | SL-S12 |
| Certification | CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
SL-S04 Toys Safety Testing Equipment ASTM Impact Flooring Medium
EN71-8 Toy Testing Equipment Swing Suspension Connector Durability Tester
IS9873/ISO8124-4 Toys Testing Equipment Durability Tester for Suspension
SL-ST604 Toys Testing Equipment EN71-8 Toggle Testing Equpment
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 1 unit |
| Delivery Time | 7 working days | Packaging Details | Alu.box |
| SKYLINE | Sharp Edge Tester | Standards | ISO 8124-1 EN-71,ASTM F963 |
| Weight | 3.5 kg | Dimensions | 290x180x115 mm |
| Accessories | charging unit, foot switch, one roll of PTFE tape, base plate | Warranty | 18 months |
| Brand Name | SKYLINE | Model Number | SL-S12 |
| Certification | CE | Place of Origin | CHINA |
| High Light | stability test chamber ，swing durability tester | ||
ISO 8124-1 1.35LB Fixed Force Sharp Edge Tester for Children Products
Application
Used to determine whether the edge of a toy or item is a sharp edge with an unreasonable risk of injury.
Product Information
To determine whether accessible edges on toys are likely to cause injury. A self-adhesive PTFE tape is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.
Test principle
The steel shaft used to simulate children's fingers needs to be hardened. The surface Rockwell hardness should be no less than 40, the surface roughness should not be greater than 0.40 microns, and the diameter should be 9.35 mm ± 0.12 mm. A layer of simulated artificial skin tape was applied perpendicularly to a steel shaft wrapped with simulated artificial skin glue with a force of 6 N (1.35 lb). The steel shaft was constant tangent at 23 mm/sec ± 4 mm/sec. The speed is rotated for one week. Check the edge of the test to cut (cut) the simulated artificial skin adhesive paper. If cut (cut), the tested edge is defined as a potentially dangerous sharp edge.
Sharp edge tester usage and judgment results
1. Attach the PTFE adhesive tape to the mandrel as required, and then rotate the mandrel along the tested accessible edge by 360°. Check that the test adhesive tape is gravity-corrected.
Whether the ball can pass the test template completely. The length of the cut. Calculate the percentage of the length of the cut tape. Judgment: If the adhesive tape is cut by 50%
Split, the edge is considered to be a sharp edge.
2. The edge to be tested shall be the accessible edge determined after the accessibility test of the toy part or component.
3. If the touchable edge of the toy as a whole cannot be tested, in the case of simulating the toy as a whole, the accessible edge can be removed and tested separately.
4. The key to the sharp edge test is how to fix the detected edge and ensure that the mandrel is at right angles to the edge, and there is no phase between the mandrel and the edge during the test.
For sports.
5. During the rotation of the mandrel, it should be ensured that the pressure applied to the mandrel is continuously stable.
Specification
| Size | (L*W*H)29*19*10cm |
| Weight | 3.5Kg |
| Speed | 1.00±0.08 In/s |
| Fixed force | 1.35LB |
| Material | stainless steel |
| Accessories | Tiefo Long Tape PTFE Tape A set of foot switches, a power charger, an operating manual |
| Standard | ASTM F963 4.7, EN 71-1 8.11, 16 CFR 1500.49, ISO 8124-1 5.8, |
Technical Parameters
1.Diameter of rotary mandrel shown in table 1:
| Standard | EN71-1 | ASTM F 963/16CFR1500.49 |
| Nominal value | φ(9.53±0.12)mm | φ(0.375±0.005)inch |
| Measured value | φ9.450mm | φ0.3720 inch |
2.Measured value of force shown in table 2:
| Standard | EN71-1 | ASTM F 963/16CFR1500.49 |
| Nominal value | (6±0.5)N | 1.35 lbf |
| Measured value | 6.00N | 1.35 lbf |
3.Rotate speed of rotary mandrel shown in table 3:
| Standard | EN71-1 | ASTM F 963/16CFR1500.49 |
| Nominal value | (23±4)mm/s | (1.00±0.08)inch/s |
| Measured value | 19.3mm/s | 0.760inch/s |
4.Roughness of rotary mandrel shown in table 4:
| Standard | EN71-1 | ASTM F 963/CFR150.49 |
| Nominal value | ≤0.4 μm | ≤16 micro inch |
| Measured value | 0.15 μm | 5.9 micro inch |
Sharp Edge Tester and Sharp Point Tester.pdf
How do you test sharp edges?
The edge shall be identified as sharp if it completely cuts through the tape for a length of not less than 1/2 inch (13 millimeters) at any force up to 1.35 pounds (6.00 Newtons). (2) Procedure. (i) The edge of the sample to be tested shall be held in such a manner that it does not move during the test.
Sharp Edge Tester operation video link:
https://www.youtube.com/watch?v=TREo3kIsqVc
Accessories
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Seller
Year Established:
2011
Total Annual:
120000-350000
Employee Number:
100~107
Ecer Certification：
Verified Supplier
SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support service... SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support service...
Get in touch with us
Leave a Message, we will call you back quickly!