Needle Detector Machine AC 220V,50HZ,120W Power Metal Detectors For Food

Product Specification

Needle Detector Machine AC 220V,50HZ,120W Power Metal Detectors For Food Industry

 
Feature:
1. The balanced principle, more stable and reliable, performance is better;
 
2. Phase control technology, to carry out product regulation, and effectively suppress product effect.
 
3. Use DSP and MCU to combined detection signal data sampling and data processing, improve the detection effect;
 
4. Digital frequency generator produces frequency, phase and amplitude are adjustable sine wave, change the analog circuit parameters is difficult to adjust and fit condition, can easily adjust the various parameters sensitivity, etc.;
 
5. Large LCD display panel, such as operation in both Chinese and English menu, the user can
choose according to their requirements, with the good man-machine dialogue interface
 
6. With self learning function, expanded the range of the detecting material;
 
7. With the memory function, could keep more than 10 products inspection parameters
 
8. Meet HACCP,GMP approved standard.
 
9. Monitor the use of sound and light alarm, automatically exclude or shutdown, the operational use of extremely reliable and user-friendly.
 
 
Spectifications:

Installation

1) The construction of precision instrument, should not work under high temperature and humidity.
2) attention to the surrounding environment, should not have moving ferromagnetic objects, such as electric fans, sewing machines. Notwithstanding the existence of the unit circuit interference, or should be avoided.
3) The machine should work properly fixed, shaking or vibration of the instrument may have resulted in false alarms instrument.
Staff 4) to operate the machine, the body can not carry articles containing ferromagnetic, such as a lot of keys, cell phones, BB machine, steel ruler, caliper, such as a screwdriver.

Operating procedures

1) Check the machine probe, the conveyor belt, whether the debris, tools, etc., should be removed if the following between the probe and the surface of the conveyor belt below the window pallet.
2) Detection
3) the subject goods should not be too much, can not exceed the detection channel, if a collision detection probe may cause false alarms.
4) If the machine detects the abnormal sound, should immediately stop inspection, troubleshooting and then tested.
5) detection probe should remain very stable, does not allow the probe stack anything allowed by the probe as a rest support, press the "Run" button to start action should be light, to prevent false alarms due to vibration.
6) the machine to vibration or power fluctuations, and occasionally there will be an alarm phenomenon is normal, not a fault.
7) After each test should be promptly click the "Power" button and unplug it off.

 maintenance

1. Each test is completed, the conveyor belt response, probe maintenance on the machine removed the foreign body. Special attention probe window below the surface of any debris between the pallet and the conveyor belt is not allowed.
2. Rinse detector is not allowed to remove the debris. To ensure the conveyor belt, the probe control box dry.
3. When summer temperatures or a long time without much prior to use shall conveyor, pallet accumulation of moisture on the electrical box to dry before boot.
4. Regularly check the machine transmission parts refueling, if loose fastening screws should be tightened.
 

The picture of metal detector: