Hai Da Labtester
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, MoneyGram |
| Supply Ability | 300 Sets per Month |
| Delivery Time | 20 days after order confirmed |
| Packaging Details | each set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Ozone Produced Mode | Ozone generator or UV absorption method |
| Test Mode A | Room temperature |
| Dispaly | Digital |
| Test Speed | Adjustable |
| Product | rubber testing equipment |
| Control Method | Computer automatic test |
| Temperature Rang | normal temperature~200℃ |
| Electric Heating Power | AC220V±10%50HzAC220V±10%50Hz |
| Testing Standards | ASTM, ISO, GB, JIS, etc. |
| Brand Name | Haida |
| Model Number | 60088-HD |
| Certification | CE,,ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Plastic Pipe Pulling Test Machine Pull-out Tester for Plastic Pipe Fitting
Plastic pipeline Hydrostatic Pressure Tester
Plastic Pipe Thermal Cycle Testing Machine
Plastic Pipe Thickness Tester
Product Specification
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, MoneyGram | Supply Ability | 300 Sets per Month |
| Delivery Time | 20 days after order confirmed | Packaging Details | each set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Ozone Produced Mode | Ozone generator or UV absorption method | Test Mode A | Room temperature |
| Dispaly | Digital | Test Speed | Adjustable |
| Product | rubber testing equipment | Control Method | Computer automatic test |
| Temperature Rang | normal temperature~200℃ | Electric Heating Power | AC220V±10%50HzAC220V±10%50Hz |
| Testing Standards | ASTM, ISO, GB, JIS, etc. | Brand Name | Haida |
| Model Number | 60088-HD | Certification | CE,,ISO |
| Place of Origin | China | ||
| High Light | Haidathermal Conductivity Tester ，surface temperature Thermal Conductivity Tester ，Hot Disk Thermal Conductivity Tester | ||
The thermal conductivity tester adopts the transient plane heat source method, based on TPS transient plane heat source technology, and uses a Hot Disk probe. It can be used to test the thermal conductivity, thermal conductivity (thermal diffusion coefficient), specific heat capacity, thermal storage coefficient and thermal resistance of metals, alloys, graphite, thermal grease, silicone, silicone rubber, ceramics, rock and soil, rocks, polymers, paper, fabrics, foam plastics, concrete, composite panels, paper honeycomb panels and other solids, powders, liquids, pastes, coatings, films, thermal insulation materials, insulation materials, anisotropic materials, etc.
Technical Paramet
| Item | Parameters |
| Thermal conductivity range | 0.001~500 w/(m.k), resolution 0.0001w/(m.k) |
| Thermal diffusion coefficient range | 0.1~100m2/s |
| Thermal storage coefficient range | 0.1~30w/(m2.k) |
| Specific heat capacity range | 0.1~5kJ/(kg.ºC) |
| Thermal resistance range | 0.5~0.000005mm2.k/w |
| Temperature measuring accuracy | ≤0.0001ºC |
| Measurement relative error | ≤3% |
| Repeatability error | ≤3% |
| Measuring time | 1~120 seconds |
| Sample test temperature range | Room temperature (Various high and low temperature control chamber or test states under vacuum can be optional according to customer requirements) |
| Probe | Φ15mm |
| Various sample tests | a. Solid block or round, square, or special-shaped samples do not require special preparation, only a relatively flat sample surface is required, and a special sample clamping device is provided. b. There are no special requirements for powder, paste, or liquid substances, and a special sample test box is provided. c. For thinner materials (thickness 0.01-1mm), special test plans and mathematical models are used for testing. d. For high-conductivity materials (100-500W), special test plans and mathematical models are used for testing. e. For thermal insulation materials (0.010-0.050W), special test plans and mathematical models are used for testing. |
| Control mode | Fully automatic test software, fast and accurate analysis of sample test process parameters and report output |
| Machine dimension | (L*W*H)380*40*450mm |
| Machine weight | Approx. 20KG |
| Power | AC 220V±10%, 50/60 Hz, 500W |
About us
Why choose us?
1.Design & Production : Solution Consultation for each order
Recommend the most cost -performance machine
Research & Develop the suitable one for Special- designed Model.
2.Shipping & Delivery: One-Stop Service
Production- Deliver to your door - Installation & Training- Technical Support
3.Warranty
1 year warranty with lifetime technology support
4.After-Sale Service
React within 2 Hours
Video inspection & on-site service combined
FAQ
Q: How about your warranty?
Q: What is the order process?
Q: Can we visit your factory before order?
Q: Do you accept customization service?
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2004
Total Annual:
$ 5 Million-US$ 10 Million
Employee Number:
200~300
Ecer Certification：
Verified Supplier
.gtr-container-7f8d9e { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 20px; max-width: 1200px; margin: 0 auto; box-sizing: border-box; } .gtr-container-7f8d9e p { font-size: 14px; margin-bottom: 1e... .gtr-container-7f8d9e { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 20px; max-width: 1200px; margin: 0 auto; box-sizing: border-box; } .gtr-container-7f8d9e p { font-size: 14px; margin-bottom: 1e...
Get in touch with us
Leave a Message, we will call you back quickly!