Hai Da Labtester
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, MoneyGram |
| Supply Ability | 300 Sets per Month |
| Delivery Time | 20 days after order confirmed |
| Packaging Details | each set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Usage | Quality Control and Testing |
| Transformer Capacity | 1000VA |
| Impact Speed | 3.4m/s |
| Runway | Length 100mm |
| External Size | 900*500*800 (W*D*H) |
| Impact Angle | 90 degree |
| Temperature Tester | Room temperature to 200°C |
| Dimension | 650mm×400×830mm |
| Timing Range | 3min(can be set arbitrarily) |
| Current Measurement Range | 10pA~1mA |
| Fixture Load | 2.5N |
| Ozone Produced Mode | Ozone generator or UV absorption method |
| Horizontal | 500mm * 250mm * 500m |
| Specimen Thickness Range | 0~60 mm |
| Specimens Size | 16mm, 6-15mm (D) |
| Observer | CIE 10° Standard observer |
| Specification | 20-88HRA, 20-100HRB, 20-70HRC |
| Pressure Resolution | 0.001Mpa (0.01bar or 1PSI) |
| Test Mode A | Room temperature |
| Dispaly | Digital |
| Test Speed | Adjustable |
| Ball Weight | 5kg |
| Exterior Dimension | 95x150x105cm |
| Punching Stroke | 25mm |
| Temperature Uniformity | ±2℃ |
| Controlling Accuracy | ±0.2°C |
| Brand Name | Haida |
| Model Number | 60089-HD |
| Certification | CE,,ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Plastic Pipe Pulling Test Machine Pull-out Tester for Plastic Pipe Fitting
Plastic pipeline Hydrostatic Pressure Tester
Plastic Pipe Thermal Cycle Testing Machine
Plastic Pipe Thickness Tester
Product Specification
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, MoneyGram | Supply Ability | 300 Sets per Month |
| Delivery Time | 20 days after order confirmed | Packaging Details | each set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Usage | Quality Control and Testing | Transformer Capacity | 1000VA |
| Impact Speed | 3.4m/s | Runway | Length 100mm |
| External Size | 900*500*800 (W*D*H) | Impact Angle | 90 degree |
| Temperature Tester | Room temperature to 200°C | Dimension | 650mm×400×830mm |
| Timing Range | 3min(can be set arbitrarily) | Current Measurement Range | 10pA~1mA |
| Fixture Load | 2.5N | Ozone Produced Mode | Ozone generator or UV absorption method |
| Horizontal | 500mm * 250mm * 500m | Specimen Thickness Range | 0~60 mm |
| Specimens Size | 16mm, 6-15mm (D) | Observer | CIE 10° Standard observer |
| Specification | 20-88HRA, 20-100HRB, 20-70HRC | Pressure Resolution | 0.001Mpa (0.01bar or 1PSI) |
| Test Mode A | Room temperature | Dispaly | Digital |
| Test Speed | Adjustable | Ball Weight | 5kg |
| Exterior Dimension | 95x150x105cm | Punching Stroke | 25mm |
| Temperature Uniformity | ±2℃ | Controlling Accuracy | ±0.2°C |
| Brand Name | Haida | Model Number | 60089-HD |
| Certification | CE,,ISO | Place of Origin | China |
| High Light | rubber plastic test equipment ，software interface thermal conductivity tester | ||
HD-DRM-II Thermal Conductivity Tester
(Heat Pulse Method)
The transient heat pulse method thermal conductivity tester is used to measure the thermal conductivity, thermal storage coefficient, thermal conductivity and specific heat of homogeneous plate-like, colloidal, powdery and granular materials under dry or different moisture conditions. It is suitable for testing inorganic materials such as thermal insulation materials, concrete materials, plastics, rubber, graphite, etc.
The characteristics of this instrument are: simple device, high accuracy, fast test speed (one test takes about ten minutes), and the thermal conductivity, thermal storage coefficient, thermal conductivity and specific heat of the material can be measured simultaneously in one test, and the thermophysical properties under different moisture conditions can be measured.
Technical Parameters
| Item | Parameters |
| Thermal conductivity range | 0.001~10W/m.k |
| Thermal storage coefficient test range | 0.1~100W/m2K |
| Sample size | One thin specimen 20×20×(1.5~3)cm Two thick specimens 20×20×(4~10)cm |
| Accuracy of measurement results | ±3% |
| Control mode | Computer automatic testing, data printout |
| Working condition | 10~35℃, ≤80%RH |
| Power | AC 220V±10%, 50/60 Hz, 200W |
About us
Why choose us?
1.Design & Production : Solution Consultation for each order
Recommend the most cost -performance machine
Research & Develop the suitable one for Special- designed Model.
2.Shipping & Delivery: One-Stop Service
Production- Deliver to your door - Installation & Training- Technical Support
3.Warranty
1 year warranty with lifetime technology support
4.After-Sale Service
React within 2 Hours
Video inspection & on-site service combined
FAQ
Q: How about your warranty?
Q: What is the order process?
Q: Can we visit your factory before order?
Q: Do you accept customization service?
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2004
Total Annual:
$ 5 Million-US$ 10 Million
Employee Number:
200~300
Ecer Certification：
Verified Supplier
.gtr-container-7f8d9e { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 20px; max-width: 1200px; margin: 0 auto; box-sizing: border-box; } .gtr-container-7f8d9e p { font-size: 14px; margin-bottom: 1e... .gtr-container-7f8d9e { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 20px; max-width: 1200px; margin: 0 auto; box-sizing: border-box; } .gtr-container-7f8d9e p { font-size: 14px; margin-bottom: 1e...
Get in touch with us
Leave a Message, we will call you back quickly!