Guangdong Haida Equipment Co., Ltd.
| Type | Testing Machine |
| Accuracy Class | High Accuracy |
| Accuracy | / |
| Application | PV Module Testing, Photovoltaic Panel Testing, Mechanical Load Testing, Solar PV Testing |
| customized support | OEM, ODM |
| power | 120V 5A |
| Protection Class | / |
| Voltage | 220 V |
| warranty | 1 Year |
| Cylinder Space | Cylinder space is adjustable |
| Cylinder Type | Low Friction |
| Cylinder Stroke | 400mm |
| Static Mechanical Load 1 | Downward pressure: 800 Pa ~ 12,000 Pa; |
| Static Mechanical Load 2 | Upward pull: 800 Pa ~ 6,000 Pa; |
| Dynamic Mechanical Load 1 | Downward pressure: -2,500 Pa ~ +2,500 Pa(Setting at software) |
| Dynamic Mechanical Load 2 | Cycle: 3~7 cycles/min |
| Brand Name | HAIDA |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
PV Module Weld Material Tensile Testing Machine Solar Panel Welding Material
Solar Photovoltaic Rapid-rate Thermal Cycle Test Chamber PV Circuit Continuity
Circuit Continuity Monitoring System Temperature and Current Testing Machine
UV Pre-Conditioning Testing Chamber Solar Panel Ultraviolet Damage Sensitivity
Product Specification
| Type | Testing Machine | Accuracy Class | High Accuracy |
| Accuracy | / | Application | PV Module Testing, Photovoltaic Panel Testing, Mechanical Load Testing, Solar PV Testing |
| customized support | OEM, ODM | power | 120V 5A |
| Protection Class | / | Voltage | 220 V |
| warranty | 1 Year | Cylinder Space | Cylinder space is adjustable |
| Cylinder Type | Low Friction | Cylinder Stroke | 400mm |
| Static Mechanical Load 1 | Downward pressure: 800 Pa ~ 12,000 Pa; | Static Mechanical Load 2 | Upward pull: 800 Pa ~ 6,000 Pa; |
| Dynamic Mechanical Load 1 | Downward pressure: -2,500 Pa ~ +2,500 Pa(Setting at software) | Dynamic Mechanical Load 2 | Cycle: 3~7 cycles/min |
| Brand Name | HAIDA | Place of Origin | Guangdong, China |
| High Light | PV Module Mechanical Load Test Machine ，Solar PV Module Tester ，Photovoltaic Panel Mechanical Load Test Machine | ||
Cylinder-type device | Allow the component sample to freely bend and deform under applied load, ensuring the test surface pressure uniformity remains within ±5%. |
Pressure Method | Gradually and uniformly increase load until reaching the set value, using both downward pressure and upward pull methods. |
Max sample size | 2600*1400mm(L*W) |
Cylinder Space | Cylinder space is adjustable |
Cylinder Type | Low Friction |
Cylinder Stroke | 400mm |
Cylinder Quantity | 72 sets (12*6) Enable free adjustment of suction cup spacing in both horizontal and vertical directions at equal intervals. |
Cylinder distance | Cylinder Center Point Distance≤20cm |
Edge cylinder center distance from module edge≤20cm | |
Deformation Detection | Infrared non-contact, deformation measurement range ±10 cm, accuracy ±0.5 mm, with 7 points that can be placed at any position within the same plan |
DC Stabilized Power Supply | Powering 1 Module; |
DC Power Supply: 120V 5A. | |
Static Mechanical Load | Downward pressure: 800 Pa ~ 12,000 Pa; |
Upward pull: 800 Pa ~ 6,000 Pa; Setting at software | |
Dynamic Mechanical Load | Downward pressure: -2,500 Pa ~ +2,500 Pa(Setting at software) Cycle: 3~7 cycles/min |
Deflection Detection | Laser non-contact |
Measurement range≥10cm | |
Accuracy±0.5mm | |
Measurement points: 5 point(can be placed at any position within the same plane) | |
Temperature Monitoring | Equipped one temperature sensor (OMEGA T-type thermocouple) Calibration point: 25°C |
Controller Controller | Capable of storing operational data, equipped with a USB interface, enabling conversion of operational data into Excel/PDF files and charts. |
Test pressure, cycle count, cycle duration, and energization current; each pressurization process is independently programmable: every test parameter for each cycle must be individually configurable. | |
Each suction cup's pressure can be individually controlled, and pressure can be set separately. | |
Including non-uniform snow loads, validated on top of previously delivered loads. | |
Collect test pressure, time, module deflection, real-time cycle count, energized current, voltage, and module temperature data. The sampling frequency is configurable. | |
Using Touchscreen control | |
Control panel can display real-time test data curves; historical data and curves can be viewed on the control panel; historical data can be exported to Excel. | |
Safety Device | The air supply source equipped with a safety valve and status indicator lights. In the event of a test failure, the device will sound an alarm and halt the test. |
Air source | 0.6~0.8Mpa(prepare by user) |
Power | Single-phase, 220V, 50Hz |
Machine Dimension | Approx.,3700*2000*2300mm(W*D*H) |
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2004
Total Annual:
$ 5 Million-US$ 10 Million
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Haida International Equipment Co., Ltd Company Profile Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibra... Haida International Equipment Co., Ltd Company Profile Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibra...
Get in touch with us
Leave a Message, we will call you back quickly!