Classic Inorganic Fire Retardant Paint Coating Eco Friendly Stain Resistant

Product Specification

Fire Retardant Paint Classic inorganic inorganic and eco-friendly stain-resistant, breathable

Product Introduction

This product is an environmentally friendly interior wall paint made of liquid inorganic silicate as a bonding material and other environmentally friendly materials. It can fully penetrate the tiny pores in the cement substrate, so that the coating film and the wall are integrated. The product has good fire resistance and scrub resistance, and has strong air permeability and antibacterial and mildew resistance, and the decorative effect is long-lasting.

Product Features

1. Fire retardant: The fire rating reaches A1, it does not burn at high temperatures, and does not produce harmful gases.

2. Super scrub resistance: The number of scrubbing resistance is ≥20,000 times.

3. Good stain resistance: The stain resistance level reaches level I.

4. Good air permeability: The coating film is transparent and has super air permeability. The moisture inside the building can evaporate freely to the outside, keeping the wall dry.

5. Durable: It can penetrate the wall and produce a petrochemical reaction with the wall, and it has good durability.
6. Inorganic and environmentally friendly: non-toxic, odorless, non-irritating, does not contain allergens, preservatives, fungicides and other harmful substances; formaldehyde, benzene, VOC, soluble heavy metals and other harmful substances are not detected, healthy and environmentally friendly, safe and harmless.

Product use

Suitable for interior wall decoration of various buildings such as high-end residential buildings, apartments, hotels, office buildings, hospitals, schools, shopping malls, etc.

Technical parameters

 Theoretical dosage: about 4-5㎡/1kg/2 times depending on the specific process, the actual construction area will vary due to different personal construction techniques and processes.
 Dilution ratio: depending on the specific construction situation, it can be diluted with no more than 10% of clean water.
 Drying time: about 2 hours for surface drying; recoating time is at least 2 hours (25℃, 50% relative humidity), and it can be extended moderately at low temperature.
 Maintenance time: 7 days/25℃, low temperature (not less than 5℃) can be extended to obtain ideal coating effect.
 Implementation standards: GB18582-2020 "Limits of Hazardous Substances in Wall Coatings for Buildings", GB/T 9756-2018 "Synthetic Resin Emulsion Interior Wall Coatings" superior products.
 Product specifications: 6KG/barrel.
 Shelf life: See product label.

Usage

 Construction methods: rolling, spraying, brushing, etc.
 Construction tools: material tray, palette knife, masking paper, short-hair roller, brush, water-based spray gun, etc.
Construction process: ①On the putty layer, roll and apply 1 coat of inorganic anti-alkali primer, and wait until it is completely dry;
②Roll and apply the first coat of Yingdian inorganic paint, and wait until it is completely dry;
During construction, the corners of the wall must be painted first. When the corners are not completely dry, a large area of rolling should be carried out. It is advisable to apply the slurry evenly on the wall from the upper part to the lower part, from left to right, from inside to outside, from easy to difficult, and use a roller or spray gun to apply the slurry evenly to the wall. The force should be uniform and no coating should be missed; the brushing speed should be consistent and the force should be uniform to ensure uniform coating. When rolling, it is strictly forbidden to squeeze the roller when the roller does not absorb much material; when brushing, the number of back and forth brushing should not be too many to prevent bubbling or leaving brush marks; normal rolling construction must be rolled and collected at the same time. When recycling, the roller must be collected in the same direction, and it is strictly forbidden to roll back and forth; rollers without dead angles should be selected for rolling. Try to stay close to the edge during construction; special areas such as yin and yang corners, skirtings, and gypsum ceilings can be repaired with brushes for details.