Interior Wall Self Cleaning House Paint Stain Resistant Lotus Leaf Self Odor

Product Specification

As Before Ultra self-clean Lotus leaf self-cleaning Odor removal Interior wall paints

Product Introduction:

It is High Self-cleaning Anti-sewage Diatomaceous Earth Paint
This product is a water-based functional paint made of high-quality diatomaceous earth, organic modified inorganic mineral gelling materials, and nano-titanium dioxide composite photocatalytic materials as the base materials. It adopts a new anti-fouling self-cleaning formula to increase the hydrophobicity of the coating surface, achieving self-cleaning, anti-fouling, and scrub-resistant effects. At the same time, it also has the characteristics of purifying formaldehyde, odor-free, environmentally friendly, antibacterial and mildew-proof, and high hiding power, making your home environment lasting and beautiful.

Product Features

1. Self-cleaning and stain-resistant, maintaining long-lasting wall beauty
2. Formaldehyde purification, with a formaldehyde purification performance of ≥90%
3. Antibacterial and mildew-resistant, inhibiting mold growth on walls
4. High hiding power, covering even fine cracks
5. Odor-free and environmentally friendly, with no irritating odor and free of formaldehyde, benzene, heavy metals, or other harmful substances.
6. Easy application: no mixing required.

Applications

Suitable for interior wall decoration in buildings such as residences, schools, hospitals, hotels, shopping malls, and office buildings

Specification

Construction process:

 Construction method: rolling, spraying, brushing, etc.
 Construction tools: material tray, palette knife, textured paper, short-hair roller, brush, water-based spray gun, etc.
 Construction process: ① On the putty layer, roll one coat of water-based diatom environmental protection primer and wait for it to dry;
② Roll the first coat of Ruchu high self-cleaning sewage-resistant diatom paint and wait for it to dry;
During construction, the corners of the wall must be painted first. When the corners are not completely dry, a large area of rolling is carried out. It is advisable to apply the slurry evenly on the wall from the upper part to the lower part, from left to right, inside first and then outside, easy first and then difficult. Use a roller or spray gun to brush the slurry evenly on the wall. The force should be uniform and no coating should be missed; the brushing speed should be consistent and the force should be uniform to ensure uniform coating. When rolling, it is strictly forbidden to squeeze the construction with force when the roller does not absorb much material; when brushing, the number of back and forth brushing should not be too many to prevent bubbling or leaving brush marks; normal rolling construction must be rolled and collected. The roller must be collected in the same direction during recycling, and it is strictly forbidden to roll back and forth; for roller coating construction, try to choose a roller without dead angles. Try to stay close to the edge during construction; special areas such as corners, skirtings, and gypsum ceilings can be repaired with brushes for details.
③ The second coat of roller coating is as high as the initial self-cleaning anti-sewage diatom paint.
Construction environment: It is not suitable for construction when the temperature is below 5℃ or the relative humidity is above 80%.
Base treatment: Before construction, clean the surface of the base to be painted to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as ash sand, plaster, cement, etc. (pH value is less than 10, moisture content is less than 10%) should be dried before construction.
During construction, please configure necessary protection and labor protection supplies according to local operating specifications, such as protective glasses, gloves and professional construction clothes.
Before construction, the mixture should be fully stirred and used in a certain proportion. The mixing container must be clean and free of other chemical substances and debris.
During and after construction, please use clean water to clean the equipment in time