Customized Color Water Based Paint For Interior Walls High Covering And Hiding

Paint More is a high-quality water-based environmentally friendly interior wall paint, made of organic modified inorganic mineral gelling materials, environmentally friendly additives and other raw materials, refined by advanced technology. The product has the characteristics of health and environmental protection, excellent covering power, strong adhesion, and excellent construction performance.

Organic modified inorganic mineral gelling materials, titanium dioxide, environmental protection additives, deionized water, etc.

• Odorless and environmentally friendly
• Excellent covering power
• Strong adhesion
• Simple construction

High-grade residential, villa, hotel, apartment, school, Museums, Cinemas, Hospitals, Art galleries, Concert halls, Office buildings, Factories

Application method: rolling, spraying, brushing, etc.

Application tools: material tray, palette knife, masking paper, short-hair roller, brush, water-based spray gun, etc.

1. On the putty layer, roll one coat of water-based diatom environmental protection primer and wait for it to dry;
2. Roll the first coat of Deep Blue Shield Graphene Antiviral Water-based Diatom Paint and wait for it to dry;
   During Application, the corners of the wall must be painted first. When the corners are not completely dry, roll a large area. It is advisable to apply the slurry evenly on the wall from the upper part to the lower part, from left to right, inside first and then outside, easy first and then difficult. Use a roller or spray gun to evenly apply the slurry to the wall. The force should be uniform and no missing paint should be applied; the brushing speed should be consistent and the force should be uniform to ensure uniform coating. During roller coating, it is strictly forbidden to squeeze the roller when the roller does not absorb much material; when brushing, the roller should not be brushed back and forth too many times to prevent bubbles or brush marks; normal roller coating must be rolled and collected at the same time. When recycling, the roller must be collected in the same direction, and it is strictly forbidden to roll back and forth; rollers without dead angles should be selected for roller coating. Try to stay close to the edge during Application; special areas such as corners, skirtings, and gypsum ceilings can be repaired with brushes for details.
3. Roller coating for the second coat of Deep Blue Shield Graphene Antiviral Water-based Diatom Coating.

It is not suitable to construct when the temperature is below 5℃ or the relative humidity is above 80%.

Clean the surface of the base to be painted before Application to ensure that the Application surface is clean, free of grease, floating dust, mold algae and other attachments; the Application surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as gray sand, plaster, cement (pH value below 10, moisture content below 10%) should be dried before Application.

During Application, please configure necessary protective and labor protection supplies according to local operating specifications, such as protective glasses, gloves and professional Application clothes.

Before Application, the mixture should be fully stirred and used in a certain proportion. The mixing container must be clean and free of other chemical substances and debris.

During and after Application, please use clean water to clean the equipment in time.