Product Specification

30W 980nm 1470nm Dual Wavelength Fiber Diode Laser System for Professional Aesthetic Applications

Product Overview

Designed for professional fiber-delivered laser applications, this compact diode laser platform integrates 980nm and 1470nm wavelengths in one desktop unit. The system supports both pulsed and continuous output, allowing trained operators to select an operating mode according to the intended professional procedure and accessory configuration.

A 10.4-inch interface provides direct access to operating settings, while the 650nm visible aiming beam assists with positioning. Laser energy is delivered through a compatible optical fiber, providing a flexible approach for localized professional applications. The 30W version described in the supplied manual uses fiber-optic coupling and is designed for use with a foot switch and professional fiber handpiece.

The platform can be supplied with different fibers and application accessories depending on the ordered configuration and destination-market requirements. Its compact body is particularly suitable for distributors and professional facilities seeking a multi-application laser platform with a relatively small installation footprint.

Quick Details

· System Category: Professional Fiber-Delivered Diode Laser

· Primary Laser Wavelengths: 980nm / 1470nm

· Optional Additional Wavelength: 635nm, subject to final configuration

· Rated Output: Adjustable, up to 30W on the manual-based configuration

· Energy Delivery: Optical fiber coupling

· Operating Modes: Pulsed output and continuous output

· Pulse Frequency: 1–9Hz

· Pulse Width: Commercial configuration 1–60ms; manual-based configuration 15–60ms

· User Interface: 10.4-inch screen

· Positioning Light: 650nm red aiming beam, below 5mW

· Fiber Options: 200μm / 400μm / 600μm / 800μm depending on configuration

· Standard Commercial Set: 600μm bare fiber + operating handle + 5 compatible needles

· Electrical Input: AC100–240V, 50/60Hz

· Cooling Method: Air cooling

· Main Unit Dimensions: 360 × 370 × 240mm

· Control Method: Screen operation with foot-switch activation

Primary Application Directions

The platform is intended for professional use and can be configured around different application directions. Final availability depends on accessories, operator qualifications and local regulatory requirements.

· Localized facial and body contouring procedures

· Jawline and double-chin contouring applications

· Fiber-assisted body shaping procedures

· Professional applications involving the appearance of small visible vessels

· Professional nail-related laser applications

· Endovenous laser applications with compatible professional accessories

· Selected soft-tissue laser procedures performed by qualified professionals

· Optional dental applications with dedicated accessories

· Optional gynecological applications with dedicated accessories

· Optional proctology applications with dedicated accessories

Key Product Features

· Two primary wavelengths integrated into a single compact platform

· Up to 30W adjustable output on the supplied manual configuration

· Choice of pulsed or continuous laser delivery

· Fiber-coupled transmission for localized energy delivery

· Adjustable power plus pulse parameters in pulsed mode

· Visible 650nm aiming beam for easier positioning

· 10.4-inch operating interface for parameter setting

· Foot-switch control for professional workflow

· Compact desktop housing for efficient room placement

· Wide-range AC input suitable for international distribution

Technology & Operating Principle

The device produces diode laser energy and couples the output into an optical fiber. The fiber guides the energy from the main unit to the selected operating area. This delivery structure allows the operator to work through a compact handpiece and compatible fiber rather than relying on a large external treatment head.

For suitable fiber-assisted aesthetic applications, laser energy creates a controlled photothermal interaction in the selected area. Operating parameters should be selected by trained professionals according to the procedure, fiber specification and applicable protocol.

The system offers two output patterns. In pulsed mode, the operator can set power, pulse width and frequency before activation. In continuous mode, laser energy is delivered continuously and output power is the principal adjustable setting. The supplied manual states that the 980nm and 1470nm outputs operate together on this configuration.

Recommended Use Environments

· Aesthetic and cosmetic professional facilities

· Professional laser treatment rooms

· Clinics operated by appropriately qualified personnel

· Distributor demonstration and training centers

· Professional facilities requiring a compact fiber laser platform

· Specialized departments using compatible optional accessories where legally permitted

Technical Specification Table

Configuration & Accessories

Suggested standard commercial configuration:

· Main laser unit

· 600μm bare fiber

· Fiber operating handle

· 5 compatible needles

· Foot switch

· Power cable

· Key set

· Protective eyewear

· User manual

Depending on the ordered version, additional fibers and application-specific accessories may be supplied separately.

Business & Product Advantages

· Multi-application platform: one main unit can support different professional application directions through compatible fibers and accessories.

· Flexible output control: pulsed and continuous modes provide different energy-delivery patterns.

· Compact footprint: the desktop body helps save working space and simplifies placement.

· International power compatibility: AC100–240V, 50/60Hz supports distribution to multiple markets.

· Fiber flexibility: multiple fiber diameters can be selected according to the final product configuration.

· Clear operating workflow: screen parameter control combined with foot-switch activation.

· Professional positioning support: a low-power red aiming beam helps identify the working position.

· Expandable configuration: optional accessory sets allow distributors to build different commercial packages for target markets.

Operation & Safety Notes

This product is intended for professional operation. Laser safety procedures, appropriate protective eyewear and applicable local requirements should be followed. The operator must not look directly into the laser output. The fiber and laser output interfaces should be kept clean, dry and protected from dust. Fiber installation or replacement should be carried out carefully and in a clean environment.

Applications that are invasive, surgical or otherwise regulated should only be carried out by appropriately qualified professionals where permitted. Product claims, available functions and accessory packages should be adjusted to the regulations of the destination market.

Buyer-Oriented Highlights

• 30W professional desktop configuration
• 980nm + 1470nm combined laser platform
• Pulse and continuous operation
• 10.4-inch user interface
• Compact 360 × 370 × 240mm body
• Fiber-based working system
• Optional fiber diameters and accessory packages
• Wide-voltage design for export markets

980nm 1470nm diode laser dual wavelength laser system 30W fiber diode laser professional fiber laser machine 980nm fiber laser equipment

1470nm diode laser equipment dual wavelength aesthetic laser desktop diode laser system optical fiber laser machine pulse CW diode laser

professional aesthetic laser device body contouring laser equipment facial contouring equipment fiber delivered laser system 30W professional laser equipment 980 1470 laser platform aesthetic equipment supplier professional laser supplier compact fiber laser machine diode laser equipment manufacturer