1500W 2000W Handheld Laser Welding Machine BWT MAX Raycus Air Cooled Laser

Product Specification

2000W 1500W Handheld Laser Welding Machine BWT MAX Raycus Air Cooling Laser Welder

Air-cooled laser welding machine adopts natural convection or forced air cooling technology

comparing with the traditional water-cooled laser equipment, there are the following core advantages:

• Reduced cost of ownership with no consumable maintenance

 · No need for cooling water/antifreeze: Completely avoid the risk of regular water change, pipe cleaning and leakage of water-cooled system, and save the maintenance cost.

 · No pump/chiller loss: Reduce the frequency of replacement of wearing parts (e.g. filters, pumps), suitable for users with limited budget.

• Compact and portable

 · Small size and light weight: omit the water tank/chiller parts, the equipment is easier to move, suitable for workshop flow or field work (such as automobile maintenance, outdoor engineering)

 · Ready to use: No need to wait for the water-cooling system to warm up, it is ready to work when it is switched on, improving response efficiency.

 · Application:Suitable for space-sensitive scenarios such as small fabrication workshops, educational training, and mobile welding services.

• Energy saving and environmental protection, strong adaptability

 · Power consumption is reduced by 30%-50%: air-cooled cooling eliminates the need for water pump circulation, directly reducing power consumption.

 · Resistant to extreme environments: Stable operation in high temperature (>40℃) or low temperature (<0℃) environments, avoiding icing/overheating failures of water coolers.

 · Data comparison:

• Low noise & Safe & Reliable

· Noise <60dB: only the fan running sound, far lower than the water cooler (more than 70dB), improve the working environment

 · No risk of water leakage/short-circuit: particularly suitable for soldering in humidity-sensitive areas such as electronic components and electrical equipment

· case:In precision soldering of PCBs, air-cooled lasers avoid the potential damage to boards caused by condensation from water-cooled systems.

• Simple maintenance for longer life

· Only the fan filter needs to be cleaned regularly: maintenance intervals are up to 6-12 months, whereas water-cooled systems need to be checked monthly.

· Laser Life Enhancement: Stabilized air-cooled cooling reduces temperature fluctuations and slows down the aging of optical components

· Industry Feedback: Some industrial-grade air-cooled fiber lasers (e.g. 1,500W) can achieve more than 80,000 hours of service life under continuous operation.

• Additional notes on limitations

· Power limitations: Currently, air-cooled technology is used for low to medium power lasers (<2,000W), while ultra-high power still relies on water cooling.
 · Thermal efficiency trade-off: When working at high loads for long periods of time, it is necessary to ensure good ventilation to avoid overheating and downsizing.

Key Advantages in handheld laser welding machine

1. Zero water maintenance – No coolant or pipes to replace.
2. Compact & portable – Ideal for mobile or space-limited workshops.
3. Energy-saving & environment-tolerant – Works in -10°C to 50°C with 30% less power.
4. Quiet & leak-proof – Safe for electronics and low-noise environments.
5. Minimal upkeep – Only requires occasional fan cleaning.

welcome to pick up your own machine according to your requirements