Shenzhen Orientronic Display Electronic Co., Ltd.
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, Paypal |
| Supply Ability | Design based on the product |
| Delivery Time | 4~6 Working Days |
| Packaging Details | Prices are set based on design and quantity. |
| Size | 2.8 inches |
| Material | TFT LCD |
| Resolution | 240XRGBX320. The display orientation can be adjusted, either horizontal or vertical |
| Overall dimensions | without touch "50.00(W) x 69.20(H) x 2.60(T) mm", resistive touch "50.00(W) x 69.20(H) x 3.80(T) mm", capacitive touch "50.00(W) x 69.20(H) x 4.08(T) mm" |
| Display area | 43.20(W) x 57.60(H) mm |
| Display driver chip | ILI9341 and ST7789 are two options available |
| Capacitive touch chip | GT911 |
| Interface type | 4-wire SPI interface |
| Backlight type | LEDX4 |
| Voltage | 2.8V - 3.3V |
| Current | 60mA |
| Power consumption | 0.2W |
| Touch type | without touch, resistive touch, capacitive touch are all available options |
| Operating temperature | -20 to 70 degrees |
| Storage temperature | 30 to 80 |
| Viewing angle direction | 12o'clock |
| Pin count | 18PIN (0.8mm spacing soldered FPC) |
| Place of Origin | China |
View Detail Information
Explore similar products
Smartwatches Thin Film Transistor 1.5x – 2x Educational Touch Screen Display
HUDs 1500cd/M2 Automotive Thin Film Transistor Lcd Module Tft For Dashboards
800×480 Thin Film Transistor TFT LCD Modules For HMI Control Panels,segment lcd
Commercial Thin Film Transistor Digital Signage and POS touch display module
Product Specification
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, Paypal | Supply Ability | Design based on the product |
| Delivery Time | 4~6 Working Days | Packaging Details | Prices are set based on design and quantity. |
| Size | 2.8 inches | Material | TFT LCD |
| Resolution | 240XRGBX320. The display orientation can be adjusted, either horizontal or vertical | Overall dimensions | without touch "50.00(W) x 69.20(H) x 2.60(T) mm", resistive touch "50.00(W) x 69.20(H) x 3.80(T) mm", capacitive touch "50.00(W) x 69.20(H) x 4.08(T) mm" |
| Display area | 43.20(W) x 57.60(H) mm | Display driver chip | ILI9341 and ST7789 are two options available |
| Capacitive touch chip | GT911 | Interface type | 4-wire SPI interface |
| Backlight type | LEDX4 | Voltage | 2.8V - 3.3V |
| Current | 60mA | Power consumption | 0.2W |
| Touch type | without touch, resistive touch, capacitive touch are all available options | Operating temperature | -20 to 70 degrees |
| Storage temperature | 30 to 80 | Viewing angle direction | 12o'clock |
| Pin count | 18PIN (0.8mm spacing soldered FPC) | Place of Origin | China |
| High Light | 2.8 inch TFT display screen ，ili9341 ST7789 TFT module ，resistive capacitive touch TFT | ||
| Pin number | Pin name | Function description | Note |
| 1 | GND | Grounded | - |
| 2 | RESET | Reset pin for display screen, low-level reset | - |
| 3 | SCL | SPI serial clock signal | - |
| 4 | D/C | Display command or display data selection pin, DCX = 1: Select display data or register parameters, DCX = 0: Select register instruction |
- |
| 5 | CSX | Display screen driver chip chip select pin, low-level enable | - |
| 6 | SDA | SPI serial data input | - |
| 7 | SD0 | SPI serial data output, floating when not in use | - |
| 8 | GND | Ground pin | - |
| 9 | VDD | Display screen analog power supply pin 2.8-3.3V | - |
| 10 | LEDA | Positive power supply pin for backlight, voltage range: 3.0-3.3V, typical value: 3.1V | - |
| 11 | LEDK1 | Negative power supply pin for backlight. When not controlled, it can be grounded through a current-limiting resistor | - |
| 12 | LEDK2 | Negative power supply pin for backlight. When not controlled, it can be grounded through a current-limiting resistor | - |
| 13 | LEDK3 | Negative power supply pin for backlight. When not controlled, it can be grounded through a current-limiting resistor | - |
| 14 | LEDK4 | Negative power supply pin for backlight. When not controlled, it can be grounded through a current-limiting resistor | |
| 15 | XL/X- | Resistive touch logic pin | Capacitive screen and non-touch screen are here denoted as NC |
| 16 | YU/Y- | Resistive touch logic pin | Capacitive screen and non-touch screen are here denoted as NC |
| 17 | XR/X+ | Resistive touch logic pin | Capacitive screen and non-touch screen are here denoted as NC |
| 18 | YD/Y+ | Resistive touch logic pin | Capacitive screen and non-touch screen are here denoted as NC |
| Pin number | Pin name | Function description | Note |
| 1 | GND | Grounding terminal | - |
| 2 | RST | Capacitive touch screen reset signal | - |
| 3 | INT_3.3V | Capacitive touch screen interrupt signal | - |
| 4 | SDA | Capacitive touch screen IIC_SDA signal | - |
| 5 | SCL | Capacitive touch screen IIC_SCL signal | - |
| 6 | VCC_3.3V | Capacitive touch power supply terminal (3.3V) | - |
Company Details
Business Type:
Manufacturer
Year Established:
2017
Total Annual:
7000000-1000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
As a specialized manufacturer of electronic display products, we produce and process: ✔️ Liquid Crystal Series Products ✔️ LCD Panels & Modules (LCM) ✔️ Backlight Units ✔️ Digital Tubes ✔️ E-Paper Displays Our Capabilities: • Customization services (accepted: dr... As a specialized manufacturer of electronic display products, we produce and process: ✔️ Liquid Crystal Series Products ✔️ LCD Panels & Modules (LCM) ✔️ Backlight Units ✔️ Digital Tubes ✔️ E-Paper Displays Our Capabilities: • Customization services (accepted: dr...
Get in touch with us
Leave a Message, we will call you back quickly!