Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
Your message must
be between 20-3,000 characters!
Submit Requirement
Thank You！
Your requirement has been sent. we will contact you quickly!
{"title":"0.96 Inch 128x64 Dots OLED Graphic Module with SPI Interface for High Contrast","imgUrl":"https:\/\/img.chinax.com\/nimg\/68\/91\/d32817bf9122928bca71539df1e6-200x200-1\/0_96_inch_128x64_dots_oled_graphic_module_with_spi_interface_for_high_contrast.jpg","attrs":{"Operating Voltage":"3.3V \/ 5V","Pixel Pitch":"0.18mm","Overall Dimensions":"35.1 X 30.9 X 3 Mm","contrast ratio":"Up to 10,000:1"}}
{"title":"High Contrast 1.3 Inch OLED Display with 128x64 Dots Resolution and 160\u00b0 Viewing","imgUrl":"https:\/\/img.chinax.com\/nimg\/80\/6a\/acb26276183e034f6b86c80267bd-200x200-1\/high_contrast_1_3_inch_oled_display_with_128x64_dots_resolution_and_160_c2_b0_viewing_angle_sh1106_drive_ic_30pin_soldering_fpc.jpg","attrs":{"Color":"white","Active Area":"29.42(W) x14.7(H) mm","Interface":"6800\/8080 interface, 4 wire serial interface, I2C","Viewing Angle":"160\u00b0"}}
{"title":"Vertical Type 0.96 Inch OLED Screen 128x64 Dots SH1107 Display with 13PIN","imgUrl":"https:\/\/img.chinax.com\/nimg\/a9\/f1\/beaab071b8905e6341025475d364-200x200-1\/vertical_type_0_96_inch_oled_screen_128x64_dots_sh1107_display_with_13pin_soldering_fpc.jpg","attrs":{"Pins Number":"13Pins","Size":"0.96inch","Resolution":"128 x 64","Va Size":"11.86 (W) x 22.74(H) mm"}}
{"title":"0.96 Inch OLED Display Module with 128x64 Resolution and SPI Interface for","imgUrl":"https:\/\/img.chinax.com\/nimg\/a4\/bd\/ea1f23fe009a38c63518bb4bebe9-200x200-1\/0_96_inch_oled_display_module_with_128x64_resolution_and_spi_interface_for_graphic_applications.jpg","attrs":{"Panel Type":"TFT","Display Color:":"White Blue Optional","Touch Screen:":"Without Touch Screen (Optional)","Screen Size":"0.96 inches"}}
{"title":"3.12 Inch 256x64 OLED Display Module with SPI Interface and 16 Greyscale","imgUrl":"https:\/\/img.chinax.com\/nimg\/da\/7f\/6cbbd7c87a6d923fb2cf46fd74e3-200x200-1\/3_12_inch_256x64_oled_display_module_with_spi_interface_and_16_greyscale.jpg","attrs":{"Operating Temperature":"-30\u00b0C To +85\u00b0C","Connect":"4 Wires SPI Interface","Outline Size":"100.5(L) X 33.5(W) X 6.3(T) mm","Display Mode:":"Passive Matrix"}}
{"title":"1.54 Inch OLED Display with 128x64 Resolution and SPI Interface for Crisp","imgUrl":"https:\/\/img.chinax.com\/nimg\/f3\/6a\/79435b22a14db17c880804636f59-200x200-1\/1_54_inch_oled_display_with_128x64_resolution_and_spi_interface_for_crisp_monochrome_graphics.jpg","attrs":{"Storage Temperature":"-40\u00b0C To +85\u00b0C","Driving Method:":"1\/64 Duty Cycle","Viewing Direction":"All Viewing Angles","Dimensions":"42.04(L) X 37.0(W) X 3.1(T) mm"}}
{"title":"3.12 Inch 256x64 Resolution OLED Display Module with SPI\/Parallel\/I2C Interface","imgUrl":"https:\/\/img.chinax.com\/nimg\/7d\/a0\/95d2a98b42fa17790eef00f45cb8-200x200-1\/3_12_inch_256x64_resolution_oled_display_module_with_spi_2fparallel_2fi2c_interface.jpg","attrs":{"Storage Temperature":"-40\u00b0C To +85\u00b0C","Interface":"Plug-in Connection","Viewing Angle":"All Viewing Angles","Size":"3.12 inch"}}
0.96 Inch 128x64 Dots OLED Graphic Module Single Color SPI Interface
Product Specifications
Product
0.96 Inch OLED Display Module
Resolution
128x64 Graphics
Driver IC
SSD1306BZ Or Equivalent
Outline Dimensions
26.7x19.26x1.41 (mm)
Display Color
White&Blue Optional
Touch Screen
Without Touch Screen (Optional)
Viewing Direction
All Viewing Angles
Interface
6800, 8080, SPI, I2C
Connection
Soldering/Hotbar (customizable)
Pin Number
30 Pins (Can Be Customized)
Product Drawing
Interface Pin Definition
PIN NO.
SYMBOL
TYPE
FUNCTION DESCRIPTIONS
1
NC(GND)
P
It should be connected to external ground.
2
C2P
I
C1P/C1N-Pin for charge pump capacitor. C2P/C2N-Pin for charge pump capacitor. Connect to each other with a capacitor. They must be floated when the Charge pump not use.
3
C2N
as above
4
C1P
as above
5
C1N
as above
6
VBAT
P
Power supply for charge pump regulator circuit. It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
7
NC
NC
8
VSS
P
Ground pin. It must be connected to external ground.
9
VDD
P
Power pin for logic circuit. It must be connected to external source.
10
BS0
Interface Select Pins
11
BS1
Interface Select Pins
12
BS
Interface Select Pins
13
CS#
I
Chip Select input pin. Active "L"
14
RES#
I
Hardware reset input pin. Active "L"
15
D/C#
I
This is Data/Command control pin. When the pin is pulled HIGH, the data at D[7:0] is data. When the pin is pulled LOW, the data at D[7:0] is command. In I2C mode, this pin acts as SA0 for slave address section. When 3-wire serial interface is selected, this pin must be connected to VSS
16
R/W#
I
read/write select pin. is selected, this pin must be connected to
17
E#
I
read/write enable pin. is selected, this pin must be connected to
18
D0
I/O
These are 8-bit bi-directional data bus to be connected to microprocessor's Data bus. When serial interface mode is selected, D2 should be kept NC, D1 will be the serial data input: SDIN, D0 will be the serial clock input: SCLK. When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0 is the serial clock input, SCL.
19-25
D1~D7
These are 8-bit bi-directional data bus to be connected to microprocessor's Data bus. When serial interface mode is selected, D2 should be kept NC, D1 will be the serial data input: SDIN, D0 will be the serial clock input: SCLK. When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0 is the serial clock input, SCL.
26
IREF
I
Current reference for brightness adjustment. This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
27
VCOMH
O
COM signal deselected voltage level. A capacitor should be connected between this pin and VSS.
28
VCC
P
Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used. It must be connected to external source when charge pump is not used.
29
VLSS
P
This is an analog ground pin. It should be connected to VSS externally.
30
NC(GND)
P
It should be connected to external ground.
This is a 0.96-inch, 128×64-pixel monochrome OLED graphic display module, featuring a SPI communication interface. The core driver chips are mostly SSD1306 (with some being SSD1315). It belongs to passive OLED (PMOLED), with pixels self-luminous and no backlight required. It has the characteristics of high contrast, wide viewing angle, low power consumption, and fast response.
The physical size of the module is compact, with the display area approximately 21.74×11.18mm. The overall module size is typically around 26×26mm. The supply voltage ranges from 3.3V to 5.5V, compatible with 3.3V and 5V systems. SPI is a 4-wire communication, and some models can be switched to I2C through hardware. The display color is mainly white, with blue and yellow-blue dual-color options available. The operating temperature range is usually -40℃ to +85℃, suitable for industrial and consumer applications.
Core Features
Self-luminous: Each pixel emits light independently. The black areas do not consume power. The contrast is extremely high and the viewing angle is close to 180°.
Low power consumption: The standby current is extremely low. The current for full screen illumination is only several tens of mA, making it suitable for battery-powered devices.
SPI interface: The communication speed is fast and the wiring is simple. It is suitable for high-speed data refreshing and long-distance connection.
Mature driver: The SSD1306/SSD1315 drivers are complete, supporting mainstream controllers such as Arduino, STM32, and ESP32, and there are abundant open-source resources.
Dual support for graphics and text: It can display characters, numbers, icons, simple graphics and animations. The resolution meets the basic interaction display requirements.
Main Applications
Smart Wearables: Smart watches, bracelets, health monitors, showing time, heart rate, steps, and exercise data.
Internet of Things and Sensors: Local display terminals for temperature and humidity, air quality, voltage and current sensors.
Portable Medical Devices: Blood glucose meters, blood oxygen meters, electrocardiographs, portable testers, showing measurement values and status.
Industrial Control and Instruments: Small PLCs, frequency converters, thermostats, handheld testers, status and parameter screens of auxiliary displays.
Consumer Electronics and Hackers: Mini game consoles, desktop clocks, weather stations, Bluetooth speakers, DIY electronic projects.
Automotive Electronics: Vehicle small meters, tire pressure monitoring, auxiliary displays of interior control modules.
Frequently Asked Questions
1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm?
No problem. Firstly, please kindly send us your specification/ drawing paper. If you have not the specification, you can also provide your samples; we will recommend the suitable one if it is standard products. Or we can customize for you based on your own requirement.
2. This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
For the segment type LCD module, if you need modify the outline size or display content, a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type, can you make?
That's all right. We can change for you as per you request.
4. I want customize a new LCD module. Can you do?
Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size of the LCD display, display information (Glass thickness, Polarizer, Display Type, Connector mode, Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.
5. What is leading time for tooling?
General speaking, it will cost 15 to 25 days after drawing paper confirmation and tooling charge payment, we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Yes. Samples order is available.
7. What is the Leading Time?
If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for special ones, the leading time is about 15-30 days. suppose we can finish earlier, we will report the information in advanced.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
2000000-5000000
Employee Number:
680~1000
Ecer Certification：
Verified Supplier
DONG GUAN BIBUKE Electronics Technology Co., Ltd.
It set up in the year of 2002, is a high-tech enterprise specialized in producing LCD and LCM. Our company has 1500 staffs and more than 30000 square kilometer area, advanced LCD production lines, and a professional tea... DONG GUAN BIBUKE Electronics Technology Co., Ltd.
It set up in the year of 2002, is a high-tech enterprise specialized in producing LCD and LCM. Our company has 1500 staffs and more than 30000 square kilometer area, advanced LCD production lines, and a professional tea...
