What is the ball weight and distance of the ik09 grade lighting certification

Product Specification

What is the ball weight and distance of the ik09 grade lamp?

We all know that the IK grade is determined by the free fall impact of the pendulum in joules. The specific reference standard is the protection level of the housing of electrical equipment against external mechanical collisions (IK code). So what is the ball weight and distance of the ik09 grade lamp?

In the IK grade standard, the weight of the IK09 ball is 5KG, and it impacts from a height of 20 cm. IEC62262 (specifies how to install the object to be tested when doing IK protection grade testing, ventilation conditions, the number and distribution of impact hammers and the impact hammers corresponding to each grade), IEC60598 (GB7000) and IEC60068-2-75 (GB2423.55) standards for the application of IK testing of lighting products. These relevant standards mainly regulate the relevant test steps and usage methods for lighting products in IK protection grade testing, and ultimately meet the requirements for testing whether the product is qualified.

The purpose of this standard is to specify:

a) The protection provided by the enclosure of electrical equipment to protect the internal equipment from harmful effects caused by mechanical impact

b) The marking of the protection level;

C) The requirements for each marking;

d) The tests to be carried out to confirm whether the enclosure meets the requirements of this standard.

Application of IK code Generally, the protection level applies to the entire enclosure. If some parts of the enclosure have different protection levels, the corresponding protection levels should be marked.

Marking If the relevant product committee decides to require the marking of the IK code, the marking requirements should be specified in detail in its relevant product standards. If applicable, the product standard should also specify the marking method to be used in the following cases: - The protection level of a part of the same enclosure is different from that of other parts; - The installation status will affect the protection level of the enclosure.

In the IK rating standard, the weight of the IK09 ball is 5KG and it impacts from a height of 20 cm. IEC62262 (specifies how to install the object to be tested, ventilation requirements, the number and distribution of impact hammers and the impact hammers corresponding to each level when doing IK protection level testing), IEC60598 (GB7000) and IEC60068-2-75 (GB2423.55) standards for the application of IK testing of lighting products. These relevant standards mainly regulate the relevant test steps and usage methods for IK protection level testing of lighting products, and ultimately meet the requirements for testing whether the products are qualified.

The purpose of this standard is to specify:

a) The protection provided by the housing of electrical equipment to protect the internal equipment from harmful effects caused by mechanical collision

b) The marking of the protection level;

C) The requirements for each mark;

d) The tests that should be carried out to confirm whether the housing meets the requirements of this standard.

Application of IK code Generally, the protection level applies to the entire housing. If some parts of the housing have different protection levels, the corresponding protection levels should be marked.

Marking If the relevant product committee decides to require the marking of the IK code, the marking requirements should be specified in detail in its relevant product standards. If applicable, the product standard should also specify the marking method to be used in the following situations: - the degree of protection of one part of the same enclosure is different from that of other parts; - the installation state will affect the degree of protection of the enclosure.