Mini LED Neon Flex ultra thin lightweight design with high brightness uniform

Product Specification

Specification:

What are the advantages of Extra thin LED neon flex?        

1. 120pcs High-Brightness SMD2835 LED Source (120 LEDs/m)

• SMD2835 packages (2.8×3.5mm) are 30% smaller than SMD5050, allowing 120 LEDs/m high density with zero visible LED hotspots
• 105–120 lm/W efficacy: 14.4W/m max power draw delivers ~1600 lm/m brightness, with 90% energy savings vs. traditional 3kV–15kV glass neon
• Strict SDCM <3 (Standard Deviation of Color Matching) tolerance: Zero perceptible color shift between batches, even for 50+ location retail rollouts ordered years apart
• Ra >80 (white variants) for comfortable retail/hospitality glow; RGB variants use 1R1G1B per 2835 package for clean color mixing without fringing
• 12V/24V DC low-voltage drive, <30℃ surface temp, safe for public indoor/outdoor spaces

2. Dual Protection for LEDs & Components – No “Unit Failure” Cascade

• Circuit-level redundancy: 12V units group 3 LEDs into an independent parallel branch, 24V units group 6 LEDs per branch. If a single LED degrades/dies, the rest of its branch stays lit, and failure does not cascade to the rest of the run.
• Component-level sealing: Every SMD solder joint is secondary-coated with clear silicone before PVC jacketing, preventing moisture/oxidation from reaching circuits even if the outer jacket is nicked during install. Injection-molded nylon end caps + potted sealant at strip terminations add a second layer of isolation for the internal circuit.

3. First-Class Eco-Friendly UV-Resistant PVC Jacket

• RoHS/REACH certified: Zero lead, mercury, phthalates, or other EU/US-restricted substances — safe for indoor public spaces (schools, food retail, healthcare) and light outdoor use
• Imported UV stabilizer additive: Resists photodegradation for 18–24 months in covered outdoor environments (storefront canopies, sign boxes, walkway trellises) without yellowing, brittleness, or surface chalking
• Upgrade note: For full outdoor exposure (direct rain, coastal salt spray, >2 years UV), we recommend our silicone co-extruded series — this PVC line is optimized for cost-conscious semi-outdoor/indoor-first high-volume rollouts.

4. Extra Thin, Lightweight, Soft Bend – High Brightness, Uniform Glow, Zero Dots/Dark Spots

• Slim 8×16mm cross-section: 20mm minimum bend radius, follows curved building outlines, round signage, column wraps, and irregular landscape features without kinking FPCB or jacket
• 120 LEDs/m high density + semi-circular dome PVC profile with inner micro-diffuser: Scatters direct LED light into 120° continuous, linear glow — no visible LED dots even close-up, no dark spots between cut points/LED clusters, even for fine brand typography (e.g., café “OPEN” scripts, convenience store logo outlines)
• Weight: ~0.25kg/m, 70% lighter than equivalent glass neon, mounts with simple clips or 3M VHB tape (indoor) / stainless steel brackets (outdoor) – no heavy support frames needed

5. Tool-Free Install, Cuttable & Reconnectable

• Marked cut points: Black cut lines every 2.5cm (12V) / 5cm (24V) along the strip — cut only at these points to avoid damaging parallel circuits
• IP65 reconnect accessories included: Matching nylon waterproof connectors + pre-measured silicone sealant kits are available separately. Cut, plug in, reseal with provided glue in <5 minutes, and retain full IP65 rating
• Mounting flexibility:
  • Indoor: Pre-applied 3M VHB double-sided tape on FPCB backside for peel-and-stick install
  • Outdoor: Compatible with standard aluminum extrusion channels (sold separately) for added protection and heatsinking

6. IP65 Protection Rating (Critical Install Requirement)

• IP65 certification: Dust-tight, resistant to low-pressure water jets (light rain, sprinkler overspray, outdoor humidity) — suitable for covered patios, sign boxes, and walkway outlines. Not submersible — for immersion use, upgrade to our IP68 silicone series.
• Mandatory install step: All cut points, connector joints, and strip terminations MUST be sealed with the provided silicone glue during installation to maintain IP65 rating. Our accessory kits include step-by-step sealing instructions to avoid this common failure point that causes most “waterproof neon” field failures.

Typical Applications (SMD2835 PVC Series)

• Chain convenience store / café / milk tea shop storefront outlines
• Pedestrian street canopy guidance lighting
• Shopping mall interior dropped-ceiling linear accents
• Lightbox signage backlighting (even glow behind acrylic faces)
• Municipal park walkway edge marking (covered sections)

Vasten Quality Backing (Same Bar Across All Tiers)

• 100% FPCB/LED incoming batch inspection
• 48–72hr mandatory burn-in per production batch to catch early-life failures
• 2-year pro-rata warranty
• CE / RoHS / EMC / UKCA certified for global customs clearance
• Project pedigree: Same QC standards used for Disneyland, Happy Valley, and British royal wedding installs — your rollout gets the same reliability at a lower unit cost.

What are the applications of double lighting LED neon?      

1. Indoor and outdoor architectural outline decorations    

2. Walkway and park guiding-line lighting system, and landscaping

3. Ideal for bridge, sculpture, building contour, and board fringe illuminating decoration

Applications & Installations:

* Bedroom Light
* Garden Light
* Dining light
* Accent Light
* Bar Light
* Club
* counter Light
* office