4-Eye 4*90W COB LED Audience Blinder — IP65 RGB DMX512 Wide Flood Light for

Product Specification

Anatomy of the FX-300P: Inside Dasen's IP65 4-Eye Blinder Light

This is not a spec sheet. It is a teardown — a look at each major system of the FX-300P blinder light and the job it does on stage, at outdoor shows, and in TV stations.

The Four Eyes

The FX-300P's signature is its four-eye configuration: four independent optical cells, each housing a 90W 3-in-1 COB LED (amber / warm white) — 360W total. Four separate eyes mean four separately aimable beams, which translates directly into wider coverage and bolder split-color looks than a single-panel blinder can produce.

The Pixel Brain

Behind the eyes sits pixel control: each LED can be addressed individually rather than as one block. In practice, this unlocks chasing patterns, sequential sweeps, and layered effects that a conventional blinder simply cannot render — the difference between a "flash" and a "choreography."

The Optics

A 40° beam angle spreads output evenly across the stage or set, avoiding hot spots while keeping coverage wide enough for large venues. It is a wash-first optical design — consistency over throw.

The Color Engine

An adjustable color temperature from 1800K to 5000K spans warm amber atmospheres to cool daylight scenes, letting operators re-tune the fixture's mood without swapping gels or carrying spare units.

The Nervous System

Control runs on DMX and RDM, so the FX-300P syncs with the rest of a lighting console ecosystem and can be remotely addressed and monitored. Connectivity uses IP-rated 5-pin (3-pin) Seetronic DMX and PowerCon connectors — the touring standard that resists accidental disconnection mid-show.

The Control Deck

On the fixture itself, an OLED display and 4-touch-button panel handle quick configuration: addressing, presets, and parameter tweaks without a laptop on site.

The Shell

Finally, the IP65 rating seals the entire package against dust and water jets. The FX-300P is not merely "okay for outdoor use" — it is specified for it, holding performance through weather that ends indoor-only fixtures.

Technical Data

Light Distribution Data

Dimension

Installation Diagram

FAQ

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable

Q2. What about the lead time?
A: Sample needs 5~15 days, mass production time needs 25~35days

Q3. Do you have any MOQ limit for led light order?
A: MOQ20 to 50, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?
A: Firstly:let us know your requirements or application.
Secondly:We quote according to your requirements or our suggestions.
Thirdly:customer confirms the samples and places deposit for formal order.
Fourthly:We arrange the production.

Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 1, 2 , 5 year warranty to our products.

Q8: How to deal with the faulth?
A: Firstly:Our products are produced in strict quality control system and the defective rate will be less than 2%.
Secondly:during the guarantee period, we will send new spare parts for replacement. For defective batch products, we can discuss with the real situation.

Q9: Do you work a project?

A: Sure. We have more than 50 engineers and a EPC department. We are a national high-tech enterprise which integrates with " Lighting Design, Product R&D and manufacturing, control & programming, installation, Maintenance and upgrading".