Shenzhen Xinlichuan Electric Co., Ltd.
| Warranty | 3 months ~ 1 year |
| Product name | 2 Phase Digital stepper motor driver |
| Product size | 117*78*34mm |
| Matched motor | Nema 23 Nema 34 Stepepr Motor |
| Installation | Horizontal and vertical available |
| working voltage | 24-50VDC |
| Power | >200W |
| 32 DSP control | support |
| Driver type | digital driver |
| Maximum peak current | 5.6A |
| Subdivision range | 200~25600ppr |
| Model Number | MC556E |
| Brand Name | Lichuan |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Product Specification
| Warranty | 3 months ~ 1 year | Product name | 2 Phase Digital stepper motor driver |
| Product size | 117*78*34mm | Matched motor | Nema 23 Nema 34 Stepepr Motor |
| Installation | Horizontal and vertical available | working voltage | 24-50VDC |
| Power | >200W | 32 DSP control | support |
| Driver type | digital driver | Maximum peak current | 5.6A |
| Subdivision range | 200~25600ppr | Model Number | MC556E |
| Brand Name | Lichuan | Place of Origin | Guangdong, China |
| High Light | stepper driver ，stepper motor ，stepper motor driver | ||
Drive function | Instructions |
15 microstep subdivisions can be set for the Driver through 4 dial switches SW5~SW8. The Driver shall be stopped while setting subdivision. See driver panel instruction for microstep subdivision settings. | |
8 output currents can be set for the Driver through 3 dial switches SW1~SW3. See driver panel instruction for output current settings. | |
Automatic half-flow function | Automatic half current function can be set for the Driver through switch SW4. OFF means that quiescent current is set to half of operating current; ON means that quiescent current and dynamic current are the same. SW4 shall be set as OFF for general use to reduce heat generation of the motor and the driver and to improve reliability. About 0.3s atier pulse train stops, current will automatically reduce 50% (actual value 55%) and theoretically, heat generation will reduce 65%. |
Signal interface | PUL+ and PUL- are positive and negative terminals of pulse signal control; DIR+ and DIR- are positive and negative terminals of direction signal; ENA+ and ENA- are positive and negative terminals of enable signals. |
A+ and A- connect to positive and negative terminals of A phase winding of stepper motor; B+ and B- connect to positive and negative terminals of B phase winding of stepper motor. When A and B phase windings are switched, the Motor direction will be reversed. | |
DC/AC power supply, operation input voltage range: 20 ~ 50 VDC, 36VDC input voltage is suggested, power supply shall be higher than 100W. | |
There is 1 green indicator light and 1 red indicator light on the Driver. The green one is power indicator light, it illuminates when the Driver is connected to power supply; the red one is failure indicator light, it illuminates when over-voltage or over-current failure occurs. Red indicator light goes off after failure is eliminated. Failure of the Driver can only be eliminated by re-connecting to power supply and reusing. | |
Installation Notes | Dimensions of the Driver: 117 x 78 x 34mm, installation pitch of holes: 111mm. Both horizontal and vertical installations can be selected (vertical installation is suggested)The Driver shall be installed closely against metal cabinet for heat dissipation. |
Series | Step Angle(°) | Holding Torque(N.m) | Rated Current(A) | Motor Length(mm) | Motor Weight (Kg) |
LC57HS41 | 1.8 | 0.6 | 2.5 | 41 | 0.5 |
LC57HS56 | 1.8 | 1.0 | 3.0 | 56 | 0.68 |
LC57HS64 | 1.8 | 1.5 | 3.0 | 64 | 1.08 |
LC57HS76 | 1.8 | 2.0 | 3.0 | 76 | 1.2 |
LC57HS82 | 1.8 | 2.2 | 4.0 | 82 | 1.25 |
LC57HS100 | 1.8 | 2.6 | 4.0 | 103 | 1.58 |
LC57HS112 | 1.8 | 3.0 | 4.0 | 113 | 1.78 |
LC86HS66 | 1.8 | 3.3 | 3.0 | 66 | 2.0 |
LC86HS80 | 1.8 | 4.5 | 5.0 | 80 | 2.5 |
LC86HS98 | 1.8 | 6.9 | 5.0 | 98 | 3.4 |
LC86HS114 | 1.8 | 8.5 | 6.0 | 114 | 4.0 |
LC86HS128 | 1.8 | 10 | 6.0 | 128 | 4.5 |
LC86HS150 | 1.8 | 12 | 6.0 | 150 | 5.4 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2009
Employee Number:
51~100
Ecer Certification：
Verified Supplier
Lichuan professional manufacturer of industrial automation solutions Founded in 2009, Shenzhen Xinlichuan Electric Co., Ltd. has been committed to the research, development, production, and sales of automation products. The company has built a research and development management platform that focus... Lichuan professional manufacturer of industrial automation solutions Founded in 2009, Shenzhen Xinlichuan Electric Co., Ltd. has been committed to the research, development, production, and sales of automation products. The company has built a research and development management platform that focus...
Get in touch with us
Leave a Message, we will call you back quickly!