ECOLFP2410 25.6V 10Ah LiFePO4 Tracker Power Pack 256Wh Built-In MPPT Smart BMS

Product Specification

ECOLFP2410 25.6V 10Ah LiFePO4 Tracker Power Pack 256Wh Built-In MPPT Smart BMS

Product Overview
The Ecolite ECOLFP2410 is a 25.6V 10Ah LiFePO4 power pack built for the daily slewing and stowing duty of modern tracker arrays. It delivers 256Wh of usable energy and combines an integrated MPPT charge stage with a smart battery management system in a compact aluminium shell that mounts flat against the tracker frame. This pack targets projects that want the lowest cost per usable watt-hour while still enjoying a long, predictable service life from a chemistry the solar industry already trusts.

Where LiFePO4 Fits on the Pole
LiFePO4 has become the default energy storage chemistry for tracker farms that want a lower upfront cost than lithium titanate. The ECOLFP2410 pairs ten matched amp-hour cells into a 25.6V nominal pack, sized for the periodic slewing of single-axis trackers and the lighter duty of small dual-axis positions. Because the cells are grade-A and capacity-matched at the factory, the pack ages evenly across seasons instead of running down a single weak cell.

Built-In MPPT and Smart BMS
The integrated MPPT charge stage lets the pack harvest more of what a panel produces and removes a separate controller from the enclosure, shortening the harness on the tracker head. A smart BMS watches cell voltage, pack current and temperature, balancing the cells continuously and disconnecting the pack if a cell drifts or the current climbs beyond safe limits. Together they let the tracker controller treat the battery as a simple, dependable 25.6V source.

Deep Cycle Performance
LiFePO4 cells in the ECOLFP2410 are rated beyond 4000 deep cycles, which comfortably covers years of daily tracking in a commercial array. Unlike lead acid blocks that lose useful capacity after a few hundred cycles, the pack holds a flat discharge profile through most of its capacity, so the tracker actuator sees stable voltage right up to the end of each discharge.

Compact Housing for Tight Mounts
At 240 x 110 x 42mm the pack fits onto slender tracker frames where a bulky 24V block will not go, and its 3.1kg weight keeps the head assembly light. The aluminium case spreads heat away from the cells during charge and discharge, M6 threaded terminals accept standard lugs, and the enclosure resists UV, dust and vibration on outdoor installations.

Applications and System Integration
The ECOLFP2410 suits single-axis trackers, small dual-axis positions, off-grid poles, solar controllers and remote monitoring nodes that need reliable daily energy with low maintenance. It can run the tracker actuator directly, pair with a small PV panel and integrated or external charge control, and be paralleled to raise capacity where more storage is needed.

• Single-axis and compact dual-axis solar trackers
• Solar controller and actuator power
• Off-grid pole and remote monitoring nodes
• Telecom and CCTV backup power
• General 24V deep cycle energy storage

FAQ
Q: How many cycles should I expect? A: Over 4000 deep cycles under normal tracker duty. Q: Does it include a charge controller? A: The MPPT function is integrated into the pack. Q: Can I parallel several packs? A: Yes, parallel connection is supported to increase capacity. Q: What chemistry does it use? A: Grade-A LiFePO4 cells. Q: Do you supply shipping documents? A: UN38.3 and MSDS are provided for every order. Q: Can you print our logo? A: Yes, OEM branding is available.

Warranty, Shipping and Compliance
Every pack ships with UN38.3 and MSDS documentation for sea and multimodal transport. A standard one-year warranty covers manufacturing defects, and extended terms are available for volume programs. Packaging uses shipping-grade cartons with foam protection, palletised for container loading to keep freight predictable.

OEM and Customization
Ecolite supports OEM and ODM projects for LiFePO4 tracker packs. Voltage, capacity, terminal style, cable length and enclosure labelling can be tailored, and the MPPT and BMS behaviour can be adjusted to match your controller logic. Send your target specification for a quotation and sample plan.