32a Home Charging Unit Car 7kW 22kwh Residential Ev Charging Stations

Product Specification

TN and IT power system 32A 230V AC IEC 61851-1 Home EV Charger Plug-in 7kW
1.Descriptions

The most flexibility and convenience come from charging at home because you can do it whenever you want. This household charging pile product's shell is made of PC+ASA. Get the greatest home charging station with all the features necessary for your needs through the European standard certification. It's just as easy to charge your car as your phone.

2.Specifications

3.Functions

A. You can give up and begin charging your automobile with the push of a button thanks to sensible charging points like far off control.

B. You do not want to make distinctive efforts to fee up on the way domestic due to the fact you can price at home.

C. You can take use of the exceptionally less expensive electrical power from your residential grid, which is an alternative to buying your electrical energy from a 1/3 party.

1. Leakage protection: when the leakage protection is started, it needs to be restarted after power failure;
2. Overcurrent protection: If the detected current is greater than the set current value (preset current value +1A), the protection will be entered and the power supply will be restored after about 10 seconds. If the overcurrent continues, the protection will be entered again and the power supply will be restored after 10 seconds. If the number of overcurrent reaches three times or more, after entering the protection, without restoring power supply, the protection can only be lifted by pulling the tip of the charging device;
3. Overvoltage protection: when the voltage exceeds 275V, the protection will be started, and the voltage will be restored automatically after it is stable;
4. Undervoltage protection: when the voltage is lower than 100V, the protection will be started, and the voltage will be restored and stabilized automatically;
5. Over temperature protection: there is a thermistor built into the PCBA and the charging device. If the temperature exceeds 85℃, the protection will be started and automatically recovered after the temperature is reduced to 75℃;
6. Ungrounded protection: The device is detected to be ungrounded (it can be charged), so it needs to be disconnected from the power supply. Check whether the ground wire of the power supply end of the charging device is connected normally. If the ground wire is connected well, power it on again.
7. Charging current setting: The initial charging current value is 8A. If you want to switch the charging setting current value, press the MODE button to display the current flashing, and then press the increase or decrease button to SET the required current number, and then press the Set button to complete the current setting. Press the mode button again to enter the reservation charging mode, and you can set the reservation time to start charging;
8. Save parameter Settings: The charging current setting and charging appointment time setting will save the last parameter Settings;
9. If there is no operation by pressing the button, exit the menu interface.