Linke Cable Technology (DongGuan) CO.,LTD
| Transport Package | Carton/Roll |
| insulating materials | customize:PVC、PE 、XLPE、EPR、SIR |
| Material Shape | Round Wire |
| Shipping Cost | about shipping cost and estimated delivery time. |
| Customization | Available |
| Range of Application | Cold-Resistant |
| Lead Time | 7-15days |
| rated temperature | -60± 200℃ |
| Sheath Material | XLPE |
| Type | Insulated |
| rated voltage | 300-600V |
| Insulation Material | PVC |
| Specification | tinned copper |
| Packaging Details | According to requirement |
| Delivery Time | 7-15 days |
| Return&refunds | You can apply for a refund up to 30 days after receipt of the products. |
| Conductor Material | Copper |
| package | By roll |
| specifications | 0.1-450mm² |
| Conductor Type | Twisted wire |
| Exterior material | customize：PVC、PE、LSFOH、silicone rubber |
| Name | Hook up Wire |
| Core | Multiple |
| Model NO. | LK-C32 |
| Application | Construction |
| Payment Terms | Advance 30% deposit and ship after receiving 70% final payment |
| Supply Ability | 50000m/day |
| Certification | 3C，UL，TPU，UL758，ROHS，REACH，CE，ISO9001-2015，ISO13485，IATF16949 |
| Place of Origin | Guangdong, China |
| Brand Name | Linke |
View Detail Information
Explore similar products
Custom Automotive Wiring Harness For Kenwood Toyota Carmy With Wire Loom And
Rainbow Color Flat Ribbon Cable with 2.54mm Pitch and Tinned Wire Core for IDC
8/10/14/16/20/40/50 Pin Flat Ribbon Cable with Red Edge for Mass Termination IDC
UL Approved PVC Insulated Electrical Cable Power Cable 1000V Lead Wire for
Product Specification
| Transport Package | Carton/Roll | insulating materials | customize:PVC、PE 、XLPE、EPR、SIR |
| Material Shape | Round Wire | Shipping Cost | about shipping cost and estimated delivery time. |
| Customization | Available | Range of Application | Cold-Resistant |
| Lead Time | 7-15days | rated temperature | -60± 200℃ |
| Sheath Material | XLPE | Type | Insulated |
| rated voltage | 300-600V | Insulation Material | PVC |
| Specification | tinned copper | Packaging Details | According to requirement |
| Delivery Time | 7-15 days | Return&refunds | You can apply for a refund up to 30 days after receipt of the products. |
| Conductor Material | Copper | package | By roll |
| specifications | 0.1-450mm² | Conductor Type | Twisted wire |
| Exterior material | customize：PVC、PE、LSFOH、silicone rubber | Name | Hook up Wire |
| Core | Multiple | Model NO. | LK-C32 |
| Application | Construction | Payment Terms | Advance 30% deposit and ship after receiving 70% final payment |
| Supply Ability | 50000m/day | Certification | 3C，UL，TPU，UL758，ROHS，REACH，CE，ISO9001-2015，ISO13485，IATF16949 |
| Place of Origin | Guangdong, China | Brand Name | Linke |
| High Light | Copper Core Hook up Wire ，Fire Extinguisher Systems Hook up Wire ，XLPE Jacket Hook up Wire | ||
16AWG-30AWG XLPE Jacket Hook up Wire for Fire Extinguisher Systems Copper Core Design
Product Specifications
| AWG | NO of Cord | Insulation Thick (mm) | Outside Thick (mm) | Packing (m/r) |
|---|---|---|---|---|
| 30 | 7/0.1 | 0.41 | 1.10 | 610 |
| 28 | 7/0.127 | 0.41 | 1.20 | 610 |
| 26 | 7/0.16 | 0.41 | 1.30 | 610 |
| 24 | 11/0.16 | 0.41 | 1.40 | 610 |
| 22 | 17/0.16 | 0.41 | 1.60 | 610 |
| 20 | 21/0.178 | 0.41 | 1.80 | 610 |
| 18 | 34/0.178 | 0.41 | 2.10 | 610 |
| 16 | 26/0.254 | 0.41 | 2.40 | 610 |
| 28 | 1/0.32 | 0.41 | 1.15 | 610 |
| 26 | 1/0.404 | 0.41 | 1.25 | 610 |
| 24 | 1/0.511 | 0.41 | 1.35 | 610 |
| 22 | 1/0.643 | 0.41 | 1.50 | 610 |
| 20 | 1/0.813 | 0.41 | 1.65 | 610 |
| 18 | 1/1.024 | 0.41 | 1.85 | 610 |
Key Features
| Brand | LINKE | Cross Section (mm²) | 0.01-500mm² |
| Wire Gauge (AWG) | [e.g., 24AWG, 28AWG] | Conductor | Tinned Copper /bare copper, based on client's requirements |
| Insulation material | PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other | Jacket Material | [PVC/PU/Rubber/Braid/etc.] |
| Certifications | RoHS/REACH/UL/CE/IP68/etc | Custom Length | [e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type | [Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy storage//etc.] | Shielding | [Shielded/Unshielded/Braid Shield] |
| Impedance | [e.g., 75Ω (for coaxial cables)] | Printing/Logo | [Text/Label/Logo, max. 20 characters] |
| Bend Radius | [e.g., ≥5× cable diameter] | Current Rating | [e.g., 5A] |
| Voltage Rating | [e.g., 30V AC/DC] | Connector Material | [Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors | [e.g., USB Type-C, 3.5mm Jack, RJ45] | Jacket | XLPE or PE or PVC RUBBER |
| Delivery Time | 7-14 days after confirming the order | Colors | [Black/White/Red/Custom Pantone/etc.] |
| temperature | Minus-70℃to 350℃(-70℃ ~ 350℃) | Package | Roll/box/plate/Custom |
| Supporting Services | custom cable, end to end solutions, including precise cutting, crimping and installation of lugs (specify material,e.g.,copper/nickel plated) | ||
Independent Laboratory • Complete Testing Equipment • Full Quality Control
We test every product by strict standards to ensure superior quality and reliable performance.
| No. | Test Item | Test Condition | Test Requirement | Test Data | Result |
|---|---|---|---|---|---|
| 1 | Structure Inspection | 1. Comply with wire size table2. Minimum thickness ≥ 80% of average thickness | Comply with wire size table | Refer to test record | Pass |
| 2 | Thermal Shock | Wind the sample on an iron rod of specified size, place in an aging oven at specified temperature for 1 hour, cool the sample to room temperature for at least 30 minutes, then observe the sample | No cracks on the sample surface | No cracks | Pass |
| 3 | Heat Deformation | 1. Measure sample thickness (mark measurement position)2. Place sample and test fixture in aging oven for preheating at specified temperature for 1 hour3. Place sample under pressure column of test fixture for 1 hour4. Re-measure sample thickness at the same position | 1. Sample shall not be cracked by pressure column or expose conductor2. Thickness reduction ≤ 50% | Refer to test record | Pass |
| 4 | FT2 | Apply a standard flame at a height of 125mm once | 1. Flame shall not propagate along its length2. Flame shall not spread to nearby flammable materials | Refer to test record | Pass |
| 5 | Aging | 1. Take five sections of 200mm-long sheath2. Place specimens in aging oven at 158℃ for 168 hours3. After taking out specimens, place at room temperature 23±5℃ for 16 hours, then test elongation at break and tensile strength | 1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of that before aging2. Tensile strength before aging > 1.41kg/mm², tensile strength after aging ≥ 80% of that before aging | Refer to test record | Pass |
| 6 | Cold Bend | Store sample in low-temperature box at specified temperature for 4 hours, wind sample on iron rod of specified size with specified turns, complete winding within 30 seconds after sample is taken out of low-temperature box | No cracks on the sample surface | No cracks | Pass |
| 7 | Conductor Resistance | Measure resistance of one-meter core conductor with DC resistance meter | At 20℃, resistance of 8AWG ≤ 2.23Ω/km | Refer to test record | Pass |
Linke cable technology (DongGuan) Co. Ltd. concentrate on R&D and
provide professional solutions to the Cable&Wire,especially for the
different industry customers.It contains :
Humanoid robot cable,
AI power cable/data cable,
Semiconductor cable/industrial automatic cable,
Sensor cable,
New energy cable,
Medical beauty wire,
UL wire cable,
Linke Cable has diversified product development capabilities and technical capabilities to support diversified
customer needs. We have obtained the following product authorization:UL 758,CCC,RoHs,REACH,CE; We
have obtained the following quality management system:ISO 9001-2015(All products); ISO 13485
(Medical apparatus and instruments),IATF 16949(Auto industry)
Company Profile
Wire and cable manufacturer Linke Cable Technology Co., Ltd is a leading cable supplier in China. In the past over 10 years, Linke Cable has been focusing on R&D, production and marketing of wire and cable. Linke provide various cables & custom cable solutions for all over the world. We are specialized in EV charging cable, medical cable, silicone cable, spring cable, braided cable, towlobe cable, UL wire, automotive cable, etc.
At Linke cable, we believe there's a better way to bring better cables to market. We use an engineer-to-engineer approach to develop better cables for customers and improve the quality of one's life.
Our Certifications
UL1007, UL1185, UL1672, UL10070, UL10483, UL1015, UL1569, UL10012, UL10269 (Single conductor, thermoplastic insulation), UL2095, UL2129, UL2468, UL2586, UL2725, UL20233, UL20280, UL20963, UL2103, UL2463, UL2517, UL2587, UL2835, UL20276, UL20549, UL21198, 2104, UL2464, UL2576, UL2661, UL2919, UL20279, UL20886, UL21664, ISO9001 and ISO13485, TS16949
CNR- Appliance Wiring Material, Extruded PVC Insulated Single, rated 105ºC, 1000V, ClassI, GroupA,B,or AB, FT1 and/or FT2. Extruded PVC Non-integral Jacketed Cable, rated 105"C, 1000V, Class I, Class or Class I/Il, Group A, B, or AB, FT1 and/or FT2. Extruded TPU Non-integral Jacketed Cable, rated 80"C, 300V, Class I, Class or Class I/Il, Group A, B, or AB, FT1 and/or FT2
Frequently Asked Questions
1. Are you a manufacturer or trading company?
We are a professional manufacturer. We can control your order from the first beginning to the last. Welcome to visit us. We'll pick you up in Shenzhen.
2. How can I get a sample to test your quality?
The samples are free for you. New clients are expected to pay for the courier cost.
3. What's your Minimum Order Quantity?
Normally 100m. However, the cable is very heavy. You'd better order a suitable quantity to avoid the high freight. Sea transportation is the best option.
4. Can I get a discount?
It depends on your quantity. We can make a discount and afford the freight. Please kindly contact us.
5. Does your company accept OEM production?
Yes, we can print your company name, and even customize the quality card to promote your company.
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
800000-1000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
.gtr-container-7f3e2a { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; max-width: 100%; overflow-x: hidden; } .gtr-container-7f3e2a .gtr... .gtr-container-7f3e2a { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; max-width: 100%; overflow-x: hidden; } .gtr-container-7f3e2a .gtr...
Get in touch with us
Leave a Message, we will call you back quickly!