Linke Cable Technology (DongGuan) CO.,LTD
| Packaging Details | According to requirement |
| Delivery Time | 7-15 days |
| Payment Terms | Advance 30% deposit and ship after receiving 70% final payment |
| Supply Ability | A few W metres a day. |
| Model NO. | LK-C114 |
| Conductor Material | Copper |
| Sheath Material | PVC |
| Insulation Material | Silicone Rubber |
| Material Shape | Round Wire |
| Range of Application | Communication, Electronic Equipment, Internal W |
| Conductor | Tinned Copper |
| Voltage | 300V |
| Use | Internal Wiring of Vehicle |
| Type | Insulated |
| Conductor Type | Twisted wire |
| Application | Overhead, Heating, Underground, Communication, Electronic Equipment, Internal W |
| Customization | Available |
| Shipping Cost | about shipping cost and estimated delivery time. |
| Return&refunds | You can apply for a refund up to 30 days after receipt of the products. |
| conductor material | copper/Tinned Copper |
| Exterior material | customize：PVC、PE、LSFOH、silicone rubber |
| insulating materials | customize:PVC、PE 、XLPE、EPR、SIR |
| specifications | 0.1-450mm² |
| rated voltage | 300-600V |
| rated temperature | -60± 200℃ |
| Certification | 3C，UL，TPU，UL758，ROHS，REACH，CE，ISO9001-2015，ISO13485，IATF16949 |
| Place of Origin | Guangdong, China |
| Brand Name | Linke |
View Detail Information
Explore similar products
Waterproof XLPE Insulated 1200A EV Charger Cable for High Voltage Electric
Tinned Copper UL3858 Silicone Rubber Cable High Voltage Power Cable with 3000V
UL3135 High Temperature Resistant Silicone Cable with 600V Rated Voltage and
1500V Al-Mylar Shielded Customizable EV Charging Cable with Silicone Rubber
Product Specification
| Packaging Details | According to requirement | Delivery Time | 7-15 days |
| Payment Terms | Advance 30% deposit and ship after receiving 70% final payment | Supply Ability | A few W metres a day. |
| Model NO. | LK-C114 | Conductor Material | Copper |
| Sheath Material | PVC | Insulation Material | Silicone Rubber |
| Material Shape | Round Wire | Range of Application | Communication, Electronic Equipment, Internal W |
| Conductor | Tinned Copper | Voltage | 300V |
| Use | Internal Wiring of Vehicle | Type | Insulated |
| Conductor Type | Twisted wire | Application | Overhead, Heating, Underground, Communication, Electronic Equipment, Internal W |
| Customization | Available | Shipping Cost | about shipping cost and estimated delivery time. |
| Return&refunds | You can apply for a refund up to 30 days after receipt of the products. | conductor material | copper/Tinned Copper |
| Exterior material | customize：PVC、PE、LSFOH、silicone rubber | insulating materials | customize:PVC、PE 、XLPE、EPR、SIR |
| specifications | 0.1-450mm² | rated voltage | 300-600V |
| rated temperature | -60± 200℃ | Certification | 3C，UL，TPU，UL758，ROHS，REACH，CE，ISO9001-2015，ISO13485，IATF16949 |
| Place of Origin | Guangdong, China | Brand Name | Linke |
| High Light | 69CM Silicone Insulated Copper Cable ，300V Silicone Insulated Copper Cable ，Wear Resistant Silicone Rubber Cable | ||
High flexibility silicone wire designed for electrical installations in demanding environments
Silicone rubber is a highly sought-after material for insulating cables that need to conduct electricity in harsh environments, including fire-prone applications. These cables offer exceptional performance with long-lasting hot air resistance up to 180-200°C, making them ideal for high-temperature applications. Additionally, they provide excellent flexibility even at low temperatures of -40°C, ensuring reliable performance in extreme conditions.
| Specification | Details |
|---|---|
| Product Make-up | Fine-wire, tin-plated copper conductor |
| Insulation | Silicone-based |
| Minimum Bending Radius | Fixed installation: 6 x outer diameter, Single bend: 3 x cable diameter |
| Nominal Voltage | U0/U: 300/500 V |
| Test Voltage | 2,000 V |
| Temperature Range | -50°C to +180°C (short-term 200°C) |
| Classification | ETIM 5.0 Class-ID: EC000993; ETIM 5.0 Class-Description: single-core cable |
| Brand | LINKE | Cross Section (mm²) | 0.01-500mm² |
| Wire Gauge (AWG) | [e.g., 24AWG, 28AWG] | Conductor | Tinned Copper /bare copper, based on client's requirements |
| Insulation material | PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other | Jacket Material | [PVC/PU/Rubber/Braid/etc.] |
| Certifications | RoHS/REACH/UL/CE/IP68/etc | Custom Length | [e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type | [Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy storage//etc.] | Shielding | [Shielded/Unshielded/Braid Shield] |
| Impedance | [e.g., 75Ω (for coaxial cables)] | Printing/Logo | [Text/Label/Logo, max. 20 characters] |
| Bend Radius | [e.g., ≥5* cable diameter] | Current Rating | [e.g., 5A] |
| Voltage Rating | [e.g., 30V AC/DC] | Connector Material | [Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors | [e.g., USB Type-C, 3.5mm Jack, RJ45] | Jacket | XLPE or PE or PVC RUBBER |
| Delivery Time | 7-14 days after confirming the order | Colors | [Black/White/Red/Custom Pantone/etc.] |
| temperature | Minus-70℃to 350℃(-70℃ ~ 350℃) | Package | Roll/box/plate/Custom |
| Supporting Services | custom cable, end to end solutions, including precise cutting, crimping and installation of lugs (specify material,e.g.,copper/nickel plated) | ||
Independent Laboratory • Complete Testing Equipment • Full Quality Control
We test every product by strict standards to ensure superior quality and reliable performance.
| No. | Test Item | Test Condition | Test Requirement | Test Data | Result |
|---|---|---|---|---|---|
| 1 | Structure Inspection | 1. Comply with wire size table2. Minimum thickness ≥ 80% of average thickness | Comply with wire size table | Refer to test record | Pass |
| 2 | Thermal Shock | Wind the sample on an iron rod of specified size, place in an aging oven at specified temperature for 1 hour, cool the sample to room temperature for at least 30 minutes, then observe the sample | No cracks on the sample surface | No cracks | Pass |
| 3 | Heat Deformation | 1. Measure sample thickness (mark measurement position)2. Place sample and test fixture in aging oven for preheating at specified temperature for 1 hour3. Place sample under pressure column of test fixture for 1 hour4. Re-measure sample thickness at the same position | 1. Sample shall not be cracked by pressure column or expose conductor2. Thickness reduction ≤ 50% | Refer to test record | Pass |
| 4 | FT2 | Apply a standard flame at a height of 125mm once | 1. Flame shall not propagate along its length2. Flame shall not spread to nearby flammable materials | Refer to test record | Pass |
| 5 | Aging | 1. Take five sections of 200mm-long sheath2. Place specimens in aging oven at 158℃ for 168 hours3. After taking out specimens, place at room temperature 23±5℃ for 16 hours, then test elongation at break and tensile strength | 1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of that before aging2. Tensile strength before aging > 1.41kg/mm², tensile strength after aging ≥ 80% of that before aging | Refer to test record | Pass |
| 6 | Cold Bend | Store sample in low-temperature box at specified temperature for 4 hours, wind sample on iron rod of specified size with specified turns, complete winding within 30 seconds after sample is taken out of low-temperature box | No cracks on the sample surface | No cracks | Pass |
| 7 | Conductor Resistance | Measure resistance of one-meter core conductor with DC resistance meter | At 20℃, resistance of 8AWG ≤ 2.23Ω/km | Refer to test record | Pass |
Linke cable technology (DongGuan) Co. Ltd. concentrate on R&D and
provide professional solutions to the Cable&Wire,especially for the
different industry customers.It contains :
Humanoid robot cable,
AI power cable/data cable,
Semiconductor cable/industrial automatic cable,
Sensor cable,
New energy cable,
Medical beauty wire,
UL wire cable,
Linke Cable has diversified product development capabilities and technical capabilities to support diversified
customer needs. We have obtained the following product authorization:UL 758,CCC,RoHs,REACH,CE; We
have obtained the following quality management system:ISO 9001-2015(All products); ISO 13485
(Medical apparatus and instruments),IATF 16949(Auto industry)
We are a professional manufacturer. We control your order from beginning to end. Welcome to visit us - we'll provide transportation from Shenzhen.
Samples are free for you. New clients are expected to pay for courier costs.
Normally 100m. However, cable is heavy so we recommend ordering suitable quantities to avoid high freight costs. Sea transportation is the best option.
Discounts depend on your quantity. We can offer discounts and cover freight costs for larger orders. Please contact us for details.
Yes, we can print your company name and even customize quality cards to promote your business.
For more information, please feel free to contact us!
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
800000-1000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
.gtr-container-7f3e2a { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; max-width: 100%; overflow-x: hidden; } .gtr-container-7f3e2a .gtr... .gtr-container-7f3e2a { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; max-width: 100%; overflow-x: hidden; } .gtr-container-7f3e2a .gtr...
Get in touch with us
Leave a Message, we will call you back quickly!