Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
Solar Lithium polymer battery cell 703048 1000mAh 3.7V For Consumer Electronics
NO.
Items
Specifications
1
batteries
3.7v 1000mah lipo battery
2
Charge voltage
4.2V
3
Nominal voltage
3.7V
4
Nominal capacity
1000mAh 0.2C Discharge
5
Charge current
Standard Charging:0.5C Rapid charge: 1.0C
6
Standard Charging method
0.5C CC(constant current)charge to 4.2V, then CV(constant voltage 4.2V)charge till charge current decline to ≤0.05C
7
Charging time
Standard Charging:2.75hours(Ref.) Rapid charge: 2hours(Ref.)
8
Max.charge current
1.0C
9
Max.discharge current
1.0C
10
Discharge cut-off voltage
2.5V0.25V(0.2C)
11
Operating temperature
Charging: 0 °C ~45 °C Discharging:0 °C ~45 °C
12
Storage temperature
-10°C~ +45 °C
13
Dimension
Length: 48±2mm (not including tabs) Width: 30±0.5mm Thickness:7±0.2mm
14
Drop Test
The cell is to be dropped from a height of meter twice onto concrete ground. No fire, no leakage
15
cycle time
≥500times
Knowledge of battery maintenance:
Maintenance of new batteries
The necessary visual inspection should be carried out before the new battery is installed, and it can be used directly after the inspection is free of defects. The battery is mostly half-full before leaving the factory, and the battery has been aging, and there is no need to perform special activation again. Before charging a new battery, ensure that the charger matches the battery to avoid battery damage.
Instructions for fast charging
For non-fast-charge series batteries, it is not recommended to use fast-charge devices to quickly charge the batteries. Fast charging will make the material transfer produced by the internal electrochemical reaction of the battery fail to keep up with the charge transfer, and the electrode material will produce large irreversible changes and lose capacity.
Battery storage
When the battery is not stored for a long time, the battery should be charged to 50%-70%, and the storage temperature should be below 25ºC.
Battery charging
When using an electric vehicle charger to charge an electric vehicle, you should first connect the charger to the electric vehicle, and then connect the charger to the power supply. If the sequence is reversed, it will easily cause a short circuit. Keep ventilated when charging, and place the charger on non-flammable objects, as the flammable parts of the vehicle.
Daily maintenance
During normal use, avoid overcharging and overdischarging the battery. During use, if the battery life drops rapidly, you should find professional maintenance personnel to inspect the vehicle and the battery in time, and you must not disassemble the battery for inspection. When used at low temperatures, the problem of reduced range may occur, which is a normal phenomenon. Care should be taken to avoid extending the range by increasing the charging time. When using it under high temperature in summer, it is strictly forbidden to expose the battery to the sun, charge it, and charge it directly without heat dissipation after use.
Pictures:
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2012
Total Annual:
500000-1000000
Employee Number:
20~50
Ecer Certification:
Verified Supplier
Shenzhen Resky Electronics Co., Ltd is a company specialized in manufacturing, sales and marketing of rechargeable lithium battery and related battery packs.
Our lithium battery cells and packs products are widely used in portable mobile devices such as Bluetooth headsets, MP3 players, PDAs, Digi... Shenzhen Resky Electronics Co., Ltd is a company specialized in manufacturing, sales and marketing of rechargeable lithium battery and related battery packs.
Our lithium battery cells and packs products are widely used in portable mobile devices such as Bluetooth headsets, MP3 players, PDAs, Digi...