NCR18650BD 18650 3.6V 3180mAh High-Performance Lithium-Ion Battery Cell

3180mAh Typical Capacity | 10A Max. Continuous Discharge | 3.6V Nominal Voltage | Long Cycle Life

Product Introduction

The NCR18650BD is a high-performance 18650 cylindrical lithium-ion battery cell designed for applications requiring a balance of energy density, stable power output and long service life.

With a typical capacity of 3180mAh, a nominal voltage of 3.6V and a maximum continuous discharge current of 10A, the cell delivers reliable performance across a wide range of operating conditions. Its stable discharge characteristics and strong cycle performance make it suitable for e-mobility, power tools, medical equipment, portable devices and other battery pack applications.

Cell Specifications

The core electrical specifications above are consistent with the technical datasheet and supporting public technical references for the NCR18650BD model.

Key Features

• High Energy Capacity – 3180mAh typical capacity in a compact 18650 form factor
• 10A Continuous Discharge – Suitable for applications requiring relatively high output current
• Stable Discharge Performance – Maintains consistent power delivery across different discharge rates
• Long Cycle Performance – Public technical data reports more than 81% initial capacity after 1500 cycles under specified test conditions.
• Wide Discharge Temperature Range – Designed for discharge operation from -20°C to 60°C
• Compact 18650 Format – Suitable for high-density battery pack configurations
• Low Internal Resistance – ≤35mΩ AC impedance under the specified test condition
• High Energy Density – Approx. 11.4Wh typical energy in a compact cylindrical cell

Applications

E-Mobility

• E-Bikes
• Electric Scooters
• Golf Carts
• Light Electric Vehicles

Power Equipment

• Power Tools
• Garden Tools
• Portable Power Equipment

Medical & Professional Equipment

• Medical Devices
• Portable Professional Equipment
• Emergency Lighting

Portable Electronics

• Portable Power Systems
• Two-Way Radios
• Personal Care Devices
• Rechargeable Consumer Electronics

The manufacturer's published application references include e-bikes, golf caddies, solar window shutters, emergency lighting, power tools, medical equipment and two-way radios.

Warning & Precautions

• Use only with a compatible battery management system (BMS) and properly designed battery pack.
• Use a charger specifically designed for lithium-ion cells.
• Do not exceed the specified charging and discharging limits.
• Do not charge outside the specified 10°C to 45°C charging temperature range.
• Do not discharge below the specified 2.5V cut-off voltage.
• Never short-circuit, crush, puncture, deform or disassemble the cell.
• Keep the cell away from water, fire, direct sunlight and excessive heat.
• Do not use cells showing leakage, swelling, deformation, discoloration or abnormal odor.
• Do not mix cells with different models, capacities, manufacturers or significantly different usage histories.
• Ensure proper insulation and protection against accidental short circuits during assembly and transportation.
• Battery packs should be designed and tested by qualified professionals according to the applicable safety and transportation requirements.