| Standby Current | Under 1.2 mA |
| Sealing | IP55 |
| Full Travel Time | About 7.2 seconds |
| Endurance | 92,000 full cycles |
| Set Weight | 7.8 kg |
| Design | Motorised actuator pair with remote control module |
| Working Voltage | 12V DC |
| Working Temperature | -25C to +74C |
| Supply Ability | 2150 Sets per Month |
| Delivery Time | 5-8 working days for stock, 27-31 days for production |
| Payment Terms | T/T,L/C,PayPal,Western Union |
| Power Per Actuator | 31 W |
| Holding Thrust | 305 N per actuator |
| Packaging Details | Moulded foam nest inside a corner-reinforced carton, two sets per export master carton, pallet and container loading on request |
| Brand Name | Liush |
| Certification | ISO 9001:2015 |
| Place of Origin | Guangdong, China |
| Model Number | for Toyota Prius XW50 |
View Detail Information
Explore similar products
Automatic Close Electric Suction Power Door Retrofit Kits For Toyota Voxy R80
Auto Electric Trunk Tailgate Lift Power Liftgate Kit For Toyota Land Cruiser
Hands-free Power Tailgate Conversion Kit Electric Tailgate Retrofit Kit for
Power Tailgate Conversion Kit Electric Tailgate Retrofit Smart Tailgate Kit for
Product Specification
| Standby Current | Under 1.2 mA | Sealing | IP55 |
| Full Travel Time | About 7.2 seconds | Endurance | 92,000 full cycles |
| Set Weight | 7.8 kg | Design | Motorised actuator pair with remote control module |
| Working Voltage | 12V DC | Working Temperature | -25C to +74C |
| Supply Ability | 2150 Sets per Month | Delivery Time | 5-8 working days for stock, 27-31 days for production |
| Payment Terms | T/T,L/C,PayPal,Western Union | Power Per Actuator | 31 W |
| Holding Thrust | 305 N per actuator | Packaging Details | Moulded foam nest inside a corner-reinforced carton, two sets per export master carton, pallet and container loading on request |
| Brand Name | Liush | Certification | ISO 9001:2015 |
| Place of Origin | Guangdong, China | Model Number | for Toyota Prius XW50 |
| High Light | Prius XW50 Liftgate Remote Kit ,Back Door Boot Opener ,Electric Boot Door Conversion | ||
The fourth-generation Prius made its rear end a design statement: a deep lower glass, a high shoulder line and a sharp kick-up at the spoiler. That shape looks dramatic but it makes the hatch awkward to reach when the car is dirty or wet, and the original gas stays on a 2016-2018 car are now the weak point of the whole assembly. Our kit replaces them with motorised actuators and a control module on the factory rear body plug.
| Brand | Model | Chassis | Body | Years |
|---|---|---|---|---|
| Toyota | Prius | XW50 | 5-door hybrid hatch, pre-facelift | 2016-2018 |
This kit is set up for the 2016-2018 pre-facelift rear end. Later XW50 cars use a different inner trim clip set, so please confirm the year when ordering; we supply the matching revision at no extra cost. Cars with an accessory roof rack use the reinforced bracket set.
| Item | Value |
|---|---|
| Design | Motorised actuator pair with remote control module |
| Working voltage | 12V DC, factory rear body harness |
| Power per actuator | 31 W |
| Holding thrust | 305 N per actuator |
| Full travel time | About 7.2 seconds |
| Standby current | Under 1.2 mA |
| Sealing | IP55 body and connectors |
| Working temperature | -25C to +74C |
| Endurance | 92,000 full cycles |
| Set weight | 7.8 kg |
| Hinge relief | Actuator carries load off the hinge springs |
| Warranty | 20 months |
The original stays come off their ball studs, our brackets bolt to the same body points, the loom follows the existing rear harness through the grommet and the module plugs in. Nothing is cut, welded or drilled. Allow about 75 minutes for a first fit; the rear trim on the pre-facelift XW50 unclips without special tools.
Actuator printing, carton artwork, manuals and loom length are made to your specification, and bracket tooling can be extended to other Prius generations. Send your model list and annual volume and we will return a written quotation with tooling cost and lead time.
Each set sits in a moulded foam nest inside a corner-reinforced carton. Two sets fill one export master carton for courier and LCL air freight, and pallet or full-container loading is available. Sea freight is supported and cargo can be released to your nominated forwarder.
Facelift cars too? Tell us the year and we ship the matching trim revision.
Does the hybrid system notice it? No, the module only reads factory signals and sleeps with the car.
Will the hatch still open by hand? Yes, including the interior release.
Minimum order? One set for evaluation, with volume pricing from ten sets upward.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification:
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!