| Power Per Actuator | 34 W |
| Self Learning | Panel weight sampled on first cycles |
| Packaging Details | Moulded foam nest inside a corner-reinforced carton, two sets per export master carton, pallet and container loading on request |
| Supply Ability | 2250 Sets per Month |
| Sealing | IP57 |
| Set Weight | 8.3 kg |
| Payment Terms | T/T,L/C,PayPal,Western Union |
| Full Travel Time | About 6.8 seconds |
| Standby Current | Under 1.1 mA |
| Working Temperature | -28C to +80C |
| Endurance | 108,000 full cycles |
| Working Voltage | 12V DC |
| Delivery Time | 5-9 working days for stock, 25-29 days for production |
| Holding Thrust | 320 N per actuator |
| Place of Origin | Guangdong, China |
| Model Number | for Toyota Prius XW50 Facelift |
| Brand Name | Liush |
| Certification | ISO 9001:2015 |
View Detail Information
Explore similar products
Automatic Close Electric Suction Power Door Retrofit Kits For Toyota Voxy R80
Auto Electric Trunk Tailgate Lift Power Liftgate Kit For Toyota Land Cruiser
Hands-free Power Tailgate Conversion Kit Electric Tailgate Retrofit Kit for
Power Tailgate Conversion Kit Electric Tailgate Retrofit Smart Tailgate Kit for
Product Specification
| Power Per Actuator | 34 W | Self Learning | Panel weight sampled on first cycles |
| Packaging Details | Moulded foam nest inside a corner-reinforced carton, two sets per export master carton, pallet and container loading on request | Supply Ability | 2250 Sets per Month |
| Sealing | IP57 | Set Weight | 8.3 kg |
| Payment Terms | T/T,L/C,PayPal,Western Union | Full Travel Time | About 6.8 seconds |
| Standby Current | Under 1.1 mA | Working Temperature | -28C to +80C |
| Endurance | 108,000 full cycles | Working Voltage | 12V DC |
| Delivery Time | 5-9 working days for stock, 25-29 days for production | Holding Thrust | 320 N per actuator |
| Place of Origin | Guangdong, China | Model Number | for Toyota Prius XW50 Facelift |
| Brand Name | Liush | Certification | ISO 9001:2015 |
| High Light | XW50 Facelift Power Liftgate ,Boot Opener Conversion Kit ,Electric Tailgate Retrofit Set | ||
Toyota revised the fourth-generation Prius in 2019: new lamp clusters, a reshaped lower bumper and a different inner trim clip set around the rear quarter. That facelift is the reason a pre-facelift kit will not simply drop in, and it is why this conversion kit exists as a separate article. Actuators, brackets and loom are all set for the 2019-2022 rear end, and the module plugs into the factory connector behind the quarter trim.
| Brand | Model | Chassis | Body | Years |
|---|---|---|---|---|
| Toyota | Prius | XW50 facelift | 5-door hybrid hatch | 2019-2022 |
This kit is only for the facelifted rear end. If your car is a 2016-2018 pre-facelift model, order the earlier revision instead — the bracket and clip set differ. Cars with an accessory roof rack use the reinforced bracket set.
| Item | Value |
|---|---|
| Conversion design | Motorised actuator pair with remote control module |
| Working voltage | 12V DC, factory rear body harness |
| Power per actuator | 34 W |
| Holding thrust | 320 N per actuator |
| Full travel time | About 6.8 seconds |
| Standby current | Under 1.1 mA |
| Sealing | IP57 body and connectors |
| Working temperature | -28C to +80C |
| Endurance | 108,000 full cycles |
| Set weight | 8.3 kg |
| Self-learning | Panel weight sampled on first cycles |
| Warranty | 22 months |
The original stays come off their ball studs, our brackets bolt to the 2019 body points, the loom runs with the existing rear harness through the grommet and the module plugs in. Nothing is cut, welded or drilled. Allow about 70 minutes for a first fit; the facelift quarter trim releases on clips and refits with the supplied replacements.
Actuator printing, carton artwork, manuals and loom length are produced to your specification, and bracket tooling can be extended to other facelift and pre-facelift variants. Send your model list and annual volume and we will return a written quotation with tooling cost and lead time.
Each set sits in a moulded foam nest inside a corner-reinforced carton. Two sets fill one export master carton for courier and LCL air freight, and pallet or full-container loading is available. Sea freight is supported and cargo can be released to your nominated forwarder.
Will it fit a 2017 car? No — order the pre-facelift revision; brackets and clips differ.
Does it suit hybrid taxis? Yes, the 108,000 cycle rating is aimed at that duty cycle.
Alarm and central locking? Untouched; the module only reads factory signals.
Minimum order? One set for evaluation, with fleet pricing from ten sets upward.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification:
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!