Shenzhen Liush Auto Parts Co.,Ltd
| Voltage | 12V DC |
| Packaging Details | Reinforced carton with foam blocks, single carton 94x29x27 cm, 1 set per carton |
| Door Mass Supported | Up to 65 kg |
| Rated Force | 860 N per actuator |
| Actuator Type | Heavy duty twin actuator |
| Bracket Material | Forged steel, zinc nickel coating |
| Supply Ability | 1300 Sets per Month |
| Payment Terms | T/T,L/C,Western Union,Trade Assurance,PayPal |
| Opening Time | About 11 seconds |
| Delivery Time | 9-17 working days after payment |
| Set Weight | 8.9 kg per set |
| Cycle Life | 38,000 cycles |
| Temperature Range | -36°C to +85°C |
| Sealing | IP68 |
| Model Number | for GWM Tank 400 SUV |
| Place of Origin | Guangdong, China |
| Brand Name | Liush |
| Certification | ISO 9001:2015 |
View Detail Information
Explore similar products
Product Specification
| Voltage | 12V DC | Packaging Details | Reinforced carton with foam blocks, single carton 94x29x27 cm, 1 set per carton |
| Door Mass Supported | Up to 65 kg | Rated Force | 860 N per actuator |
| Actuator Type | Heavy duty twin actuator | Bracket Material | Forged steel, zinc nickel coating |
| Supply Ability | 1300 Sets per Month | Payment Terms | T/T,L/C,Western Union,Trade Assurance,PayPal |
| Opening Time | About 11 seconds | Delivery Time | 9-17 working days after payment |
| Set Weight | 8.9 kg per set | Cycle Life | 38,000 cycles |
| Temperature Range | -36°C to +85°C | Sealing | IP68 |
| Model Number | for GWM Tank 400 SUV | Place of Origin | Guangdong, China |
| Brand Name | Liush | Certification | ISO 9001:2015 |
| High Light | Automatic Trunk Opener Mechanism ，Car Electric Trunk Assembly ，Electric Tailgate Lift Package | ||
Where the Tank 300 stops, the Tank 400 grows: a longer wheelbase, a broader rear aperture and a tail door that carries a full size wheel on the carrier from the showroom floor. Once a recovery board, a hi-lift bracket or a rear lamp guard is bolted to that door, the original gas struts are asked to do a job they were never sized for, and the panel begins to fall under its own weight.
Our answer is a two actuator conversion that mounts on the unchanged hinge and striker and adds a controller behind the trim. It draws power from the rear fuse box, keeps the factory plugs, and leaves no drilled hole or cut wire behind, so the car can be put back to standard before resale.
Two motorised actuators replace the struts on the factory ball studs, a controller sits behind the rear trim, and the harness plugs into the original connector. The door then opens and closes from the factory smart key, the tail door button and a dashboard switch, and the whole conversion can be reversed before the vehicle is sold.
Automatic trunk opener mechanism, factory key operation. A long press opens the door and a second long press closes it. The tail door button remains a live electric trigger, so there is no extra fob, no phone app and no dealer coding step. Fleet and rental operators can fit it without reprogramming keys.
Car electric trunk assembly rated for a wheel carrier. Each actuator produces 860 N and the pair carries a door mass of up to 65 kg, covering the panel with a steel wheel and tyre mounted on the carrier. Travel is speed controlled, so the door does not slam at the top or drop at the bottom.
Electric tailgate lift package with off road protection. The actuator is sealed to IP68, the controller stops the motor at the end of travel, park interlock prevents opening while the car is moving, and a 30A fuse protects the circuit. The opening height can be stored for low canopies and garage doors.
| Supplied | 2 heavy duty actuators, controller, harness, forged brackets, dash switch, fastener bag, printed guide |
|---|---|
| Optional | Kick sensor module for hands free opening, ordered separately |
| Fit time | About 3.5 hours for a first installation with hand tools |
| Not included | Body work, paint, welding, relocation of rear accessories |
| Item | Value |
|---|---|
| Actuator type | Heavy duty twin actuator, wheel carrier rated |
| Force per actuator | 860 N |
| Door mass supported | Up to 65 kg |
| Supply voltage | 12V DC, negative ground |
| Full open time | About 11 seconds |
| Working temperature | -36°C to +85°C |
| Design life | 38,000 open and close cycles |
| Sealing | IP68 actuator housing |
| Control inputs | Smart key, tail door button, dash switch, optional kick sensor |
| Safety | Anti pinch reverse, stall cut off, park interlock, 30A fuse |
| Bracket finish | Forged steel, zinc nickel coating |
| Set weight | 8.9 kg per set |
Actuator pairs sit in compartmented foam inside a reinforced carton of 94x29x27 cm, one set to a carton, with fasteners split by corner and a printed guide supplied in English, Russian or Arabic. Bench checks before sealing cover force curve, current draw, park interlock and reverse response. For importers we print neutral or private label cartons, add your own part numbers and translate the manual, and we hold spare actuators, controllers and switches so a claim never waits on a container.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification：
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!