Shenzhen Liush Auto Parts Co.,Ltd
| Packaging Details | Actuators in foam sleeves and hardware in a labelled bag, two cartons per set inside a master carton 86x26x25 cm |
| Payment Terms | T/T,L/C at sight,Western Union,PayPal |
| Delivery Time | 7-14 working days after payment |
| Voltage | 12V DC, negative ground |
| Bracket Material | Hot dip galvanised steel |
| Protection Features | Anti pinch rebound, overload cut off, 25A fuse |
| Opening Time | About 8 seconds |
| Sealing | IP67 actuator housing |
| Door Weight Supported | Up to 45 kg |
| Rated Force | 700 N per actuator |
| Actuator Type | Motorised tailgate actuator pair |
| Supply Ability | 1900 Sets per Month |
| Cycle Life | 48,000 open and close cycles |
| Temperature Range | -35°C to +70°C |
| Model Number | for Haval H5 P04 |
| Brand Name | Liush |
| Place of Origin | Guangdong, China |
| Certification | ISO 9001:2015 |
View Detail Information
Explore similar products
Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open
Electric Trunk Drive Kit Haval Dargo Remote Control Power Tail Door Lift Gate
Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open
Electric Trunk Lift Kit Automatic Power Tailgate Retrofit Smart Tail Door Opener
Product Specification
| Packaging Details | Actuators in foam sleeves and hardware in a labelled bag, two cartons per set inside a master carton 86x26x25 cm | Payment Terms | T/T,L/C at sight,Western Union,PayPal |
| Delivery Time | 7-14 working days after payment | Voltage | 12V DC, negative ground |
| Bracket Material | Hot dip galvanised steel | Protection Features | Anti pinch rebound, overload cut off, 25A fuse |
| Opening Time | About 8 seconds | Sealing | IP67 actuator housing |
| Door Weight Supported | Up to 45 kg | Rated Force | 700 N per actuator |
| Actuator Type | Motorised tailgate actuator pair | Supply Ability | 1900 Sets per Month |
| Cycle Life | 48,000 open and close cycles | Temperature Range | -35°C to +70°C |
| Model Number | for Haval H5 P04 | Brand Name | Liush |
| Place of Origin | Guangdong, China | Certification | ISO 9001:2015 |
| High Light | Electric Trunk Lift Upgrade ，Car Electric Trunk Retrofit ，Automatic Tail Gate Lift | ||
The Haval H5 P04 is a ladder frame SUV with a tall, flat rear door, and it works for a living in Russia, Kazakhstan, the Middle East, North Africa and Australia. Because the panel is big and the hinge sits high, closing it by hand means reaching up and pulling down with real force, and the original gas struts weaken quickly under dust and heat. This kit mounts electric actuators on the original hinge and latch points and adds a controller, so the rear door lifts and lowers on command from the factory key or the door switch.
The actuator pair is specified for the heavier H5 panel, with an IP67 housing and a low speed final travel so the latch meets the striker without a slam. The body shell stays untouched: no drilling, no welding, no cutting of original wires, and the factory struts can be refitted if the vehicle is sold on.
| Model | Haval H5 P04 rear tail door |
| Door type | Full height ladder frame SUV tail gate, side hinged |
| Kit scope | 2 motorised actuators, controller, harness, brackets, dashboard button, fastener bag, manual |
| Not included | Body panel work, painting, any welding |
| Fit time | Around 2.5 hours for a first installation |
| Parameter | Data |
|---|---|
| Actuator type | Motorised tailgate actuator pair |
| Rated force | 700 N per actuator |
| Door weight supported | Up to 45 kg including a light spoiler |
| Working voltage | 12V DC, negative ground |
| Opening time | About 8 seconds to full height |
| Operating temperature | -35°C to +70°C |
| Cycle life | 48,000 open and close cycles |
| Sealing | IP67 actuator housing |
| Control inputs | Remote key, tail door switch, dashboard button |
| Protection | Anti pinch rebound, overload cut off, 25A fuse |
| Bracket material | Hot dip galvanised steel |
Each set is split across two cartons per set: actuators in foam sleeves, controller and brackets in a labelled hardware bag, both inside a master carton of 86x26x25 cm. Units are cycled on the bench for force, current draw and rebound response before sealing. For importers and workshop chains we supply neutral cartons, private label printing, customer part numbers and manuals in English, Russian or Arabic, with spare actuators and controllers kept in stock so a service case is settled quickly. Warranty runs 24 months against manufacturing defects.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification：
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!