| Voltage | 12V DC negative ground |
| Operating Temperature | -30°C to +70°C |
| Cycle Life | 50,000 operations |
| Packaging Details | Single set carton 78x20x18 cm, two sets 80x24x35 cm, foam lined and moisture protected |
| Cycle Time | 7-8 seconds |
| Supply Ability | 1300 Sets per Month |
| Sleep Current | 0.1A |
| Fuse Rating | 15A |
| Delivery Time | 8-18 working days bulk, stock dispatch within 5 days |
| Set Weight | 4.4 kg |
| Peak Current | 8A |
| Actuator Type | Two geared motor struts, sealed tube |
| Ingress Protection | IP54 |
| Payment Terms | T/T,L/C,Western Union,Trade Assurance |
| Place of Origin | Guangdong, China |
| Certification | ISO 9001:2015 |
| Model Number | For DFSK Glory E3 / Fengon 500 |
| Brand Name | Liush |
View Detail Information
Explore similar products
Electric Trunk Back Door Remote Control Power Liftgate Kit For Dongfeng Nammi 06
Automatic Electric Sliding Door Kit Remote Power Side Door For Dongfeng Yumsun
Door Remote Control Power Tailgate Retrofit Kit For Dongfeng Nammi 01
Electric Trunk Lift Kit Smart Tailgate Kit OEM Supported for Dongfeng Fengshen
Product Specification
| Voltage | 12V DC negative ground | Operating Temperature | -30°C to +70°C |
| Cycle Life | 50,000 operations | Packaging Details | Single set carton 78x20x18 cm, two sets 80x24x35 cm, foam lined and moisture protected |
| Cycle Time | 7-8 seconds | Supply Ability | 1300 Sets per Month |
| Sleep Current | 0.1A | Fuse Rating | 15A |
| Delivery Time | 8-18 working days bulk, stock dispatch within 5 days | Set Weight | 4.4 kg |
| Peak Current | 8A | Actuator Type | Two geared motor struts, sealed tube |
| Ingress Protection | IP54 | Payment Terms | T/T,L/C,Western Union,Trade Assurance |
| Place of Origin | Guangdong, China | Certification | ISO 9001:2015 |
| Model Number | For DFSK Glory E3 / Fengon 500 | Brand Name | Liush |
| High Light | Electric Tailgate Kit OEM Wiring ,Automatic Trunk Opener Remote Control ,Auto Tailgate Anti Pinch | ||
A sedan boot lid feels light on paper and heavy in practice once the springs age. This retrofit returns the convenience: the Glory E3 and Fengon 500 rear deck opens and closes under motor power from the original key fob, a cabin button or a foot movement behind the rear bumper. The kit is supplied as a matched set, so brackets, actuator stroke and firmware are all correct for the vehicle out of the box.
One part number serves the DFSK Glory E3 and the Dongfeng Fengshen Fengon 500, which share the same rear deck geometry. Left-hand and right-hand drive bodies use identical components. Tell us the production year when ordering - early cars used a shorter spring and we include the corresponding bracket pair at no extra cost.
| Feature | Detail |
|---|---|
| Open and close | Fob, cabin button, rear handle switch, foot sensor |
| Motion profile | Soft start and cushioned stop, no slam at either end |
| Obstruction handling | Immediate stop and reverse on current or hall anomaly |
| Height control | Two stored limits for low ceilings and short drivers |
| Safety interlock | Commands ignored unless the selector is in P |
| Power failure | Deck still opens manually, no tools needed |
| Quiescent state | Sleep after 30 seconds, draw below 0.1A |
The loom plugs into the body connector behind the left rear trim; no wire is cut and no fuse is relocated. The module takes a permanent live, an ignition reference and the latch signal, and returns a status line to the dash button LED. Because the factory latch motor stays in circuit, central locking, alarm arming and the emergency release all continue to work as designed. A 15A fuse is supplied for the new circuit and should be fitted at the battery terminal block.
| Item | Value |
|---|---|
| Platform | DFSK Glory E3 / Fengon 500 |
| Supply | 12V DC negative ground |
| Actuators | Two geared motor struts, sealed tube |
| Cycle time | 7 to 8 seconds |
| Current | 8A peak, 0.1A sleep |
| Sealing | IP54 actuator housing |
| Temperature | -30 C to +70 C |
| Cycle life | 50,000 operations on rig |
| Set weight | 4.4 kg |
| Warranty | 24 months |
Included: two actuators, control module, harness, bracket pair with bolts, cabin button, foot sensor and bracket, 15A fuse, cable ties, printed manual with torque values and the learning procedure.
On site: a 10 mm and 13 mm socket, trim removal tool, multimeter, and about 75 minutes of workshop time for the first car.
Every carton carries an English manual with numbered photos, plus a QR link to a fitting video. Replacement actuators, modules, harnesses and brackets can be ordered separately from the second shipment onwards, which keeps fleet customers from having to buy a full kit for a single worn part.
Samples start at one set. Bulk orders ship in 8 to 18 working days, with stock dispatch inside 5 days when available. Cartons measure 78 x 20 x 18 cm for one set and 80 x 24 x 35 cm for two, both foam lined and moisture protected. Air, sea and express forwarding supported. OEM carton printing and private label manuals from 200 sets. Fitting questions answered in English within one working day.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification:
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!